摘要
目前,公知的三辊卷板机加工圆筒过程中出现圆筒端口错边扭斜的处理方法,一般都是调整圆筒的位置改变整体板材的受力方向而两边辊依旧水平施力使圆筒的错边扭斜现象消除。三辊卷板机圆筒错边扭斜处理的技术方法,不调整板材位置通过调整两下辊的施力方向起到一个约束扭转的作用,该方法不需要起重机配合,调整圆筒的错边量有数据可依安全可靠同时可以随时对圆筒的错边现象进行调整。
At present,the well-known three-roll roll coil processing cylinder process appears in the wrong side of the cylinder port twisting treatment method,generally adjust the position of the cylinder to change the force direction of the overall plate and both sides of the roller still horizontal force so that the wrong edge twisting phenomenon of the cylinder eliminated.Three-roll roll roller wrong edge twisting treatment of the technical method,do not adjust the position of the plate by adjusting the force direction of the two rollers to play a role in constraining the twist,this method does not need a crane to cooperate,adjust the wrong edge amount of the cylinder data can be safe and reliable at the same time can be adjusted at any time the wrong edge phenomenon of the cylinder.
作者
王秋实
张野
马驰
张强
徐进
WANG Qiu-shi;ZHANG Ye;MA Chi;ZHANG Qiang;XU Jin(Bohai Shipyard Group Co.,Ltd.,Huludao 125000,China;School of Applied Technology,Dalian Ocean University,Dalian 116023,China;China Shipbuilding Research Institute,Hangzhou 311400,China)
出处
《内燃机与配件》
2021年第23期62-63,共2页
Internal Combustion Engine & Parts
关键词
三辊卷板机
圆筒加工
圆筒扭斜
约束扭转
three-roll coil machine
cylinder processing
cylinder twisting
constraint twisting
