期刊文献+

Microstructural characteristics and mechanical properties of bronze/steel bimetallic laminated composite prepared by protective atmosphere casting process 被引量:1

下载PDF
导出
摘要 The bonding quality of bronze/steel bimetallic laminated composite is the key factor to whether it can be used in poor working conditions.In this study,bimetallic billets were prepared by the protective atmosphere casting process.The microstructural characteristics,mechanical properties and interface bonding mechanism of the bronze/steel bimetallic composites were analyzed comprehensively through a series of microstructure analysis(inicluding OM,SEM,and EDS)and mechanical properties tests.The experimental results demonstrate that the vaporization of lead(Pb)element in the bronze is only 0.4%in weight,and alloy elements are diffused into both sides at the interface.Moreover,the hardness in the bronze region exceeds 100.0 HV which indicates excellent wear resistance.Tensile and shear tests indicate that the fractures mainly occur on the bronze side with the interaction of the brittle fracture of Pb particles and the ductile fracture of Cu-Sn solid solution.The maximum tensile strength and shear strength reach 204.0 MPa and 211.0 MPa,respectively.These results demonstrate that the protective atmosphere casting process is applicable for the preparation of bronze/steel bimetallic laminated composite with high quality.
出处 《China Foundry》 SCIE CAS 2021年第5期497-504,共8页 中国铸造(英文版)
  • 相关文献

参考文献4

二级参考文献65

  • 1童震松,沈卓身.金属封装材料的现状及发展[J].电子与封装,2005,5(3):6-15. 被引量:50
  • 2管平,马青圃,胡祖尧,杜月春.双金属耐磨件复合铸造工艺试验[J].农业机械学报,2006,37(7):174-177. 被引量:4
  • 3D.H. Mesa, A. Toro, A. Sinatora and A.P. Tschiptschin: Wear, 2003, 255, 139.
  • 4R.M. Davison, T. DeBold and M.J. Johnson: Corrosion of Stainless 8reels, in ASM Handbook, Vol. 13- Corrosion, ASM International, Materials Park, OH, 1987, 547.
  • 5J.A. Penso, Y.M. Lattarulo, A.J. Seijas, J. Torres, D. Howden and C.L. Tsai: ASME Pressure Vessel Pip. Div. Publ. Pvp, 1999, 395, 243.
  • 6M.C. Tsai, C.S. Chiou, J.S. Du and J.R. Yang: Mater. Sci. Eng. A, 2002, 332, 1.
  • 7A. Durgutlu, B. Glenc and F. Findik: Mater. Design, 2005, 26, 497.
  • 8Z.L. Feng: Processes and Mechanism of Welding Residual Stress and Distortion, Woodhead Publishing, Cambridge, 2005, 3.
  • 9M.A. Arafin, M. Medraj, D.P. 2-hrner and P. Bocher: Mater. Chem. Phys., 2007, 106, 109.
  • 10Z. Livne and A. Munitz: J. Mater. Sci., 1987, 22, 1495.

共引文献24

同被引文献3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部