摘要
利用激光诱导击穿光谱技术快捷、实时、原位、微损、多元素同步分析的优势,对相同牌号下不同国标编号的钛合金进行分析,以实现对钛合金快速精确的分类识别。用激光诱导击穿光谱技术采集钛合金于各激光强度与延时下的光谱,通过对比6个特征处的峰值强度与信噪比获得最优条件。结合K最邻近算法,对最优条件下采集的TC4钛合金数据进行处理,并优化其模型参数,从而实现同牌号钛合金的分类识别研究。结果表明,采用基于数据处理与模型优化相结合的方法,可以将相同牌号钛合金的分类准确率从84.15%提升至99.14%,同时训练时间从1232.41 s降低至83.91 s,分类性能获得显著提升。研究成果有望实现对相同牌号钛合金的快速精准分类识别,具有广泛的应用前景。
Titanium alloy is a kind of metal material which with a wide range of applications,including aerospace,rail transit,medical equipment and other fields. The appearance of titanium alloys with different brands is very similar,but they are suitable for different fields. Even the properties of titanium alloys with the same brand and different numbers are different,and confusion is easy to cause serious accidents.Therefore,it is urgent to study the rapid and accurate classification and identification of titanium alloys with the same brand. In recent years,laser-induced breakdown spectroscopy as a fast,real-time,in-situ,micro-loss,multi-element synchronous analysis of advanced detection technology,favored by researchers.Using the advantages of laser-induced breakdown spectroscopy technology,the titanium alloys with different national standard numbers under the same brand are analyzed,which can realize the rapid and accurate classification and identification of titanium alloys. The whole device used in laser-induced breakdown spectroscopy is composed of laser,spectrometer,electronic control displacement platform,workstation,acquisition head,digital delay generator and several lenses and optical fibers. According to sequential analysis,the spectra of titanium alloy under various laser intensities and different delay times were collected by the device. Combined with previous literature research and experience,six characteristic spectra with high signal strength and high signal-to-noise ratio were selected. The optimal laser intensity and trigger delay were obtained by comparing the peak intensity and signal-to-noise ratio of the six characteristics. The TC4 titanium alloy spectrum collected under the optimal conditions is divided into training set and test set according to the ratio of 3∶1. The training set data is trained by a variety of algorithms,and then the test set is substituted into the trained model. Through the analysis of the two results,the advantages and disadvantages of the algorithm are determined,and the optimal algorithm is Knearest Neighbor algorithm. The optimization of data is mainly carried out from three aspects:1)By using3σ method for data screening at 10 characteristic spectra,the inferior spectra with too large or too small peak values are eliminated,to avoid its impact on the results;2)Through data normalization,reduce the impact of experimental environment and experimental parameters;3) Through principal component analysis,the data dimension is reduced,a large number of redundant data is reduced,the classification accuracy is improved and the model training time is reduced. KNN model can optimize the parameters mainly include the number of adjacent points,distance measurement,and distance weight. The number of adjacent points is the core parameter of KNN,which determines the number of data used to determine the unknown points. Distance measure is the distance calculation method between two points. Under different distance measures,the data between two points are different. Distance weight is the relative importance of determining the distance between the known point and the unknown point. The three parameters are arranged and combined into the model to retrain,and the optimal parameter combination is determined by comparing the results of the training set and the test set. The optimal classification results are obtained through various work,and the classification and recognition of the same grade titanium alloy are realized.The results show that the classification accuracy of the same grade titanium alloy can be improved from84.15% to 99.14% by combining data processing and model optimization,and the training time can be reduced from 1232.41 s to 83.91 s. The classification performance is significantly improved. The research results are expected to achieve rapid and accurate classification and identification of titanium alloys with the same brand,and have broad application prospects.
作者
许铖
李芳
陈锋
张登
邓凡
郭连波
XU Cheng;LI Fang;CHEN Feng;ZHANG Deng;DENG Fan;GUO Lianbo(Hubei Key Laboratory of Optical Information and Pattern Recognition,School of Mechanical and Electrical Engineering,Wuhan Institute of Technology,Wuhan 430205,China;Wuhan National Laboratory for Optoelectronics,Huazhong University of Science and Technology,Wuhan 430074,China;College of Optical and Electronic Information,Huazhong University of Science and Technology,Wuhan 430074,China)
出处
《光子学报》
EI
CAS
CSCD
北大核心
2022年第4期176-186,共11页
Acta Photonica Sinica
基金
国家自然科学基金(No.62075069)。
关键词
光谱学
钛合金分类
激光诱导击穿光谱
K最邻近算法
TC4钛合金
Spectroscopy
Titanium alloy classification
Laser-induced breakdown spectroscopy
Knearest neighbor
TC4 titanium alloy
