摘要
为给雅砻江某滑坡灾害风险评估提供可靠依据,分别采用可靠度法和强度折减法对该滑坡体进行稳定性分析。应用GEO-SLOPE软件,运用基于极限平衡理论的可靠度法分析滑坡体的稳定性以及滑坡体在蓄水暴雨工况和蓄水地震工况下的失稳概率;运用有限元强度折减法对各工况进行分析,并通过软件计算分析得到地震烈度和安全系数之间的关系:随着地震烈度的增加,安全系数呈陡降趋势。对于滑坡稳定性分析,两种方法取得了一致性结果,基于极限平衡理论的可靠度法计算方便但有较大的局限性,有限元强度折减法是以弹塑性理论为基础,能直观反映出滑坡的变形位移和破坏过程,更接近于工程实际情况。
In order to provide a reliable basis for landslide risk assessment,the stability of a typical landslide body was calculated and analyzed.Two different methods were used,compared and analyzed,including reliability method and strength reduction method.With the help of GEO-SLOPE software and the method of limit equilibrium theory,the stability of the landslide body was analyzed.The probability of instability of the landslide occurs under two conditions:water storage and heavy rain,water storage and earthquake.The finite element strength reduction method was used to analyze each working condition,and the relationship between seismic intensity and safety coefficient was obtained through software calculation and analysis.With the increase of seismic intensity,the safety coefficient decreases rapidly.It is convenient to calculate through limit equilibrium method but has great limitation.The finite element strength reduction method is based on the elastic-plastic theory,which can directly reflect the deformation,displacement and failure process of the landslide.This method is closer to the actual engineering situation.
作者
李红英
濮仕坤
谭跃虎
Li Hongying;Pu Shikun;Tan Yuehu(College of Defense Engineering,PLA Army Engineering University,Nanjing 210007,Jiangsu,China)
出处
《岩土工程技术》
2022年第3期208-213,共6页
Geotechnical Engineering Technique
关键词
滑坡
稳定性
可靠度
强度折减
安全系数
landslide
stability
reliability
strength reduction
safety factor
