摘要
切线模量法方法简单、参数少,易于工程应用,研究表明在计算常规尺寸的基础时具有较好的精度,而对于筏板这样的大尺寸基础时,当计算深度较深时,存在计算沉降偏大的问题。为此提出了考虑初始切线模量沿深度增大的高级切线模量法,通过与实际工程案例和小应变有限元数值计算方法结果比较,高级切线模量法能更符合实际,进一步发展完善了切线模量法。
The tangent modulus method proposed by YANG Guang-hua is simple, with few parameters and easy for engineering application. The researches have shown that it has better accuracy when calculating the foundations with conventional dimensions, but for the large-sized foundations such as rafts, the calculated settlement is too large. For this reason,an advanced tangent modulus method considering the increase of the initial tangent modulus extension depth is proposed. The comparison with the actual engineering case and the calculated results by the finite element method of the small-strain hardening soil model shows that the advanced tangent modulus method can be more realistic. This further develops and improves the tangent modulus method.
作者
杨光华
李卓勋
王东英
李志云
姜燕
YANG Guang-hua;LI Zhuo-xun;WANG Dong-ying;LI Zhi-yun;JIANG Yan(Department of Civil Engineering,South China University of Technology,Guangzhou 510640,China;Guangdong Research Institute of Water Resources and Hydropower,Guangzhou 510610,China;The Geotechnical Engineering Technology Center of Guangdong Province,Guangzhou 510610,China)
出处
《岩土工程学报》
EI
CAS
CSCD
北大核心
2022年第5期787-798,共12页
Chinese Journal of Geotechnical Engineering
基金
国家自然科学基金项目(52078143)。
关键词
切线模量法
地基沉降
有限元
小应变硬化土模型
tangent modulus method
foundation settlement
finite element
small-strain hardening soil model
