摘要
针对部分埋藏深、渗透率低、高温高盐等无法热采或化学驱的稠油油藏,部分油田采用了“CO_(2)+增溶剂”的复合吞吐生产方式,并取得了一定效果。目前关于CO_(2)吞吐方面的物模模拟实验无法满足复合吞吐的研究需要。建立了一套基于吞吐补偿系统的CO_(2)复合吞吐的物理模拟方法,开展了室内CO_(2)吞吐物理模拟实验,研究了增溶剂注入量、CO_(2)注入量、注入方式等因素对吞吐效果的影响,同时进行了现场试验并进行了跟踪评价。结果表明:增溶剂注入浓度为5%~10%、CO_(2)与化学剂注入质量比为1∶2.5~1∶5、采用两段塞注入方式,提高采出程度最高。该方法有效地模拟了复合吞吐过程中的注入、焖井和产出过程,完全满足CO_(2)复合吞吐的工艺参数优化的研究要求。
For some heavy oil reservoirs with deep burial depth,low permeability,high temperature and high salinity,which cannot be thermally recovered or chemically flooded,some oil fields had adopted the“CO_(2)+chemical agent”compound huff and puff method,and achieved certain results.The current physical simulation experiments on CO_(2) huff and puff cannot meet the research needs of compound huff and puff.A physical simulation method of CO_(2) compound huff and puff based on huff and puff compensation system was established.Physical simulation experiments of CO_(2) huff and puff were carried out in the laboratory.The effects of the solubilizer injection volume,CO_(2) injection volume and injection method other factors were studied.At the same time,the field tests and follow-up evaluations were carried out.The results show that when the injection concentration of solubilizer is 5%~10%,the mass ratio of CO_(2) to chemical agent is 1∶2.5~1∶5,the two-slug injection method is adopted,and the recovery degree improve to the highest degree.This method effectively simulates the injection,soaking and production processes in the complex huff and puff process,and fully meets the research requirements of the CO_(2) complex huff and puff parameter optimization.
作者
冯海顺
张绍东
王涛
徐宏光
翟勇
林吉生
FENG Hai-shun;ZHANG Shao-dong;WANG Tao;XU Hong-guang;ZHAI Yong;LIN Ji-sheng(Shengli Oilfield Company Petroleum Engineering Technology Research Institute, SINOPEC, Dongying 257000, China;Shengli Oilfield Company Postdoctoral Research Station, SINOPEC, Dongying 257000, China;Shandong Key Laboratory of Heavy Oil Production Technology, Dongying 257000, China;Shengli Oilfield Company, SINOPEC, Dongying 257000, China)
出处
《科学技术与工程》
北大核心
2022年第15期6060-6065,共6页
Science Technology and Engineering
基金
山东省博士后创新项目(2020-144)。
关键词
低效稠油
CO_(2)复合吞吐
参数优化
物理模拟
low-efficiency heavy oil
CO_(2)compound huff and puff
parameter optimization
physical simulation
