期刊文献+

高光滑度漆包线关键技术研究 被引量:3

Research on Key Technology of Enameled Wire with High Smoothness
下载PDF
导出
摘要 采用静摩擦系数检测仪分析漆包线表面光滑度,研究绝缘层结构及自润滑涂层厚度、表面油含量以及表面漆瘤缺陷对漆包线表面光滑度的影响规律。研究结果表明:自润滑涂层厚度增加,静摩擦系数降低,有利于提升表面光滑度;漆包线光滑度随着表面油含量的不断增加,静摩擦系数先是逐渐降低,之后逐渐上升;漆包线表面存在漆瘤缺陷,会明显降低产品表面光滑度。因此,自润滑层厚度、表面油含量的控制以及减少表面漆瘤对高光滑度漆包线的生产具有十分重要的意义。 Test the surface smoothness of enamelled wire by static friction coefficient detector, the effects of insulating layer structure, self-lubricating coating thickness, surface oil content and lacquer tumor defect on the surface smoothness of enamelled wire were studied. the result of research shows that with the increase of self-lubricating coating thickness, the static friction coefficient is lower, which is beneficial to improve the surface smoothness. With the increase of surface oil content, the static friction coefficient gradually decreases, and then increases gradually with the increase of oil content. The presence of lacquer tumor defect on the surface of enameled wire reduces the product surface smoothness. It is very important to control the thickness of self-lubricating layer and the content of surface oil and to reduce the surface paint nodules for the production of high smoothness enamelled wire.
作者 郭振兴 余琪 袁孚胜 吴礼 金平 徐溯航 钟方友 GUO Zhen-xing;YU Qi;YUAN Fu-sheng;WU Li;JIN Ping;XU Su-hang;ZHONG Fang-you(JCC Processing Business Division,Nanchang 330096,Jiangxi,China;College of Mechanical and Electrical Engineering,Central South University,Changsha 410083,Hu'nan,China;China Nerin Engineering Co.,Ltd.,Nanchang 330083,Jiangxi,China;Jiangxi Copper Technology Research Institute Co.,Ltd,Nanchang 330096,Jiangxi,China)
出处 《铜业工程》 CAS 2022年第4期21-23,共3页 Copper Engineering
关键词 漆包线 静摩擦系数 自润滑 润滑油 漆瘤 万米粒子数 enamelled wire static friction coefficient self lubricating lubricating oil paint nodule number of particles in ten thousand meter
  • 相关文献

参考文献5

二级参考文献20

共引文献6

同被引文献24

引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部