期刊文献+

面向剧烈塑性变形的几种挤压成形技术 被引量:1

Several extrusion technologies for severe plastic deformation
原文传递
导出
摘要 为了实现大尺寸块体材料的制备或高性能零构件的成形,近年来开发了面向剧烈塑性变形的挤压成形技术。总结了近年来开发的扩收挤压、循环镦挤、旋转反挤压这3种挤压成形新技术,分别阐述了其基本原理、工艺过程及变形特点,介绍了3种挤压成形新技术在铝、镁合金材料或典型产品上的应用,并提出需进一步解决的问题。研究结果和应用实践均表明,循环镦挤工艺可实现大规格、高质量变形坯料的制备,扩收挤压工艺可应用于底部带中心孔的大型薄壁筒形零件的成形,旋转反挤压工艺可实现杯形构件的高性能短流程成形。 To realize the preparation of large-scale bulk materials or the forming of high performance components,the extrusion forming technology for severe plastic deformation(SPD)were developed in recent years,and the three new extrusion technologies,including expanding-reducing extrusion(ERE),repetitive extrusion-upsetting(REU)and rotating backward extrusion(RBE)were summarized in recent years.Then,the basic principle,technological process and deformation characteristics were described,the applications of the three new extrusion technologies in aluminum and magnesium alloy materials or typical products were introduced,and the problems that need to be solved were put forward.The research results and the applied practice show that the REU technology can realize the preparation of large size and high quality deformed billets,the ERE technology are used to form large thin-walled cylindrical parts with center hole at the bottom,and the RBE technology can realize short process forming of cup components with high performance.
作者 王强 于建民 薛勇 张治民 Wang Qiang;Yu Jianmin;Xue Yong;Zhang Zhimin(National Defense Innovation Center of Extrusion Forming Technology for Complex Components,College of Materials Science and Engineering,North University of China,Taiyuan 030051,China)
出处 《锻压技术》 CAS CSCD 北大核心 2022年第10期12-16,22,共6页 Forging & Stamping Technology
基金 国家自然科学基金资助项目(51775520)。
关键词 挤压 剧烈塑性变形 扩收挤压 循环镦挤 旋转反挤压 extrusion severe plastic deformation expanding-reducing extrusion repetitive extrusion-upsetting rotating backward extrusion
  • 相关文献

参考文献4

二级参考文献27

  • 1张志民,栗新.铝合金材料在现代汽车轻量化制造技术中的应用[J].专用汽车,2007(7):40-42. 被引量:10
  • 2周贤宾.塑性加工技术的发展-更精、更省、更净[C].第八届全国塑性加工学术年会论文集.北京,2002.
  • 3沃.什彻平斯基著.徐秉业,刘信声,孙学伟译.金属塑性成型力学导论[M].北京:机械工业出版社,1987.
  • 4N R Chitkara, A Aleem. Axi-symmetric tube extrusion/ piercing using die-mandrel combinations: some experiments and a generalized upper bound analysis[J]. International Journal of Mechanical Sciences, 2001. 431:685- 1709.
  • 5K D Hura, Y Choib, H T Yeoc. A design method for cold backward extrusion using FE analysis[J]. Finite Elements in Analysis and Design,2003. 40:173-185.
  • 6Y H Kim,J H Park. Upper bound analysis of torsional backward extrusion process[J]. J. Mater. Proe. Technol. , 2003. 143-144: 735-740.
  • 7贾俐俐.挤压工艺及模具[M].北京:机械工业出版社,2006.
  • 8ZAIDI M A, SHEPPARD T. Development ofmicrostructure throughout roll gap during rolling ofaluminum alloys[J]. Metals Science, 1982,16: 229-238.
  • 9VERNON-PARRY K D, FURU T, JENSEN D J, et al.Deformation microstructure and texture in hot workedaluminum alloys[J]. Mater. Sci. Technol., 1996,12:889-895.
  • 10王强,张治民,曹亚强.AZ80镁合金热变形流变应力研究[J].塑性工程学报,2008,15(5):28-31. 被引量:7

共引文献22

同被引文献14

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部