摘要
The velocity of a particle detector in granular flow can be regarded as the combination of rolling and sliding velocities.The study of the contribution of rolling velocity and sliding velocity provides a new explanation to the relative motion between the detector and the local granular flow.In this study,a spherical detector using embedded inertial navigation technology is placed in the chute granular flow to study the movement of the detector relative to the granular flow.It is shown by particle image velocimetry(PIV)that the velocity of chute granular flow conforms to Silbert’s formula.And the velocity of the detector is greater than that of the granular flow around it.By decomposing the velocity into sliding and rolling velocity,it is indicated that the movement of the detector relative to the granular flow is mainly caused by rolling.The rolling detail shown by DEM simulation leads to two potential mechanisms based on the position and drive of the detector.
作者
Ran Li
Bao-Lin Liu
Gang Zheng
Hui Yang
李然;刘宝林;郑刚;杨晖(School of Health Science and Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China;School of Optical-Electrical and Computer Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China)
基金
Project supported by the National Natural Science Foundation of China(Grant Nos.11972212,12072200,and 12002213)。
