摘要
目的建立生活饮用水中三氯乙醛液液萃取气相色谱检测方法。方法对萃取溶剂、萃取体积等实验条件及色谱条件进行优化,通过加标实验验证方法。测定不同消毒方式的饮用水样品并与国标方法进行比较。结果在优化后的条件下,三氯乙醛浓度在1~50μg/L范围,线性相关系数r>0.9990;对末梢水加标回收率为92.6%~102%。结论液液萃取方法灵敏度高,准确性好,建立的方法可用于修正某些因素影响国标法的偏差,适用于饮用水中三氯乙醛的检测。
Objective To establish a method for determination of trichloroacetaldehyde by liquid-liquid extraction/gas chromatography(LLE/GC) in drinking water.Methods The method was optimized for extraction solvent, extraction volume, and chromatographic conditions, and was verified by spiking recoveries. The drinking water samples, which were disinfected through different modes, were determined by this method, and the result were compared with the national standard method.Results Under the optimized conditions, the concentration of trichloroacetaldehyde was in a range of 1 μg/L-50 μg/L, with a liner correlation coefficient r over 0.999 0. The spiking recovery was in a range of 92.6%-102% for tap water.Conclusion The LLE/GC method has high sensitivity and accuracy, which can be used for determination of trichloroacetaldehyde in drinking water and to correct the possible deviation associated with the national standard method.
作者
单晓梅
胡越
张兵
SHAN Xiao-mei;HU Yue;ZHANG Bing(Anhui Provincial Center for Disease Control and Prevention,Hefei 230061,China)
出处
《环境卫生学杂志》
2022年第12期915-920,共6页
JOURNAL OF ENVIRONMENTAL HYGIENE
基金
2018年卫生标准制修订项目(20180901)。
关键词
三氯乙醛
液液萃取
气相色谱
消毒副产物
trichloroacetaldehyde
liquid-liquid extraction
gas chromatography
disinfection by-products
