期刊文献+

AlCoCrFeNi_(2)V_(x)高熵合金的组织及性能研究 被引量:1

Structures and Properties of AlCoCrFeNi_(2)V_(x) High-entropy Alloys
原文传递
导出
摘要 研究了V含量对AlCoCrFeNi_(2)V_(x)高熵合金微观组织、力学性能及耐蚀性能的影响。结果发现,该系列合金不仅具有典型的双相结构,还具有优良的力学性能和耐蚀性结合。特别是AlCoCrFeNi_(2)V_(0.2)合金,其压缩率为42.9%,屈服强度为818.8 MPa,腐蚀电流密度为3.97×10^(-7)A/cm^(2),表现出了优异的强度、塑性和耐蚀性的结合。 Effects of V content on the microstructures, mechanical properties and corrosion resistance of AlCoCrFeNi_(2)V_(x)high-entropy alloys were investigated. The results indicate that the series of alloys exhibit a typical dual-phase structure and an excellent combination of mechanical properties and corrosion resistance. In particular, the AlCoCrFeNi_(2)V_(0.2)alloy possesses a compressibility of 42.9%, a yield strength of 818.8 MPa, and a corrosion current density of 3.97×10^(-7)A/cm^(2), presenting an excellent combination of strength, plasticity and corrosion resistance.
作者 高利 李小聪 赵延周 曹志强 Gao Li;Li Xiaocong;Zhao Yanzhou;Cao Zhiqiang(School of Materials Science and Engineering,Dalian University of Technology;Ningbo Research Institute,Dalian University of Technology)
出处 《特种铸造及有色合金》 CAS 北大核心 2023年第1期83-87,共5页 Special Casting & Nonferrous Alloys
基金 国家重点研发计划资助项目(2017YFA0403803)。
关键词 高熵合金 微观组织 强度 塑性 耐蚀性 High-entropy Alloys Microstructures Strength Plasticity Corrosion Resistance
  • 相关文献

参考文献10

二级参考文献82

  • 1任晓兵,王笑天,唯木次男,清水谦一.有序化与调幅分解共存现象的理论研究[J].中国科学(E辑),1996,26(3):193-201. 被引量:8
  • 2刘源,李言祥,陈祥,陈敏.多主元高熵合金研究进展[J].材料导报,2006,20(4):4-6. 被引量:84
  • 3Yeh J W, Chen S K, Lin S J, et al. Nano-structured high-entropy alloys with multiple principal elements:novel alloy design concepts and outcomes [J]. Advanced Engineering Materials, 2004,6(5): 299-303.
  • 4Zhou Y J, Zhang Y, Kim T N, et al. Microstructure characterizations and strengthening mechanism of multiprincipal component AlCoCrFeNiTi05 solid solution alloy with excellent mechanical properties [J]. Materials Letters,2008,62 (17-18) :2673-2676.
  • 5Chen Y Y, Hong U T, Shih H C, et al. Electrochemical kinetics of the high entropy alloys in aqueous environments-a comparison with type 304 stainless steel [J]. Corrosion Science, 2005,47(11): 2679-2699.
  • 6Wu J M, Lin S J, Yeh J W, et al. Adhesive wear behavior of AI-CoCrCuFeNi high-entropy alloys as a function of aluminum content [J]. Wear,2006,261 (5-6) : 513-519.
  • 7Ttmg C C, Yeh J W, Shun T T, et al. On the elemental effect of AICoCrCuFeNi high-entropy alloy system [J].Materials Letters, 2007,61(1) : 1-5.
  • 8Yeh J W, Chen Y L, Lin S J, et al. High-entropy alloys-a new era of exploitation [J]. Materials Science Forum,2007, 560 : 1-9.
  • 9Wang Y P, Li B S, Fu H Z. Solid solution or intermetallics in a high-entropy alloy [J]. Advanced Engineering Materials, 2009,11(8) :641-644.
  • 10Hsu Y J, Chiang W C, Wu J K. Corrosion behavior of FeCoNiCrCu. high-entropy alloys in 3.5% sodium chloride solution [J]. Materials Chemistry and Physics,2005,92(1):112- 117.

共引文献93

同被引文献6

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部