期刊文献+

冷态下喷油策略对双燃料发动机燃烧特性影响的可视化研究 被引量:2

Visual study on the effect of fuel injection strategies on combustion characteristics of dual-fuel engines under cold conditions
下载PDF
导出
摘要 基于一台双燃料光学发动机,结合高速成像技术开展了冷态条件下缸内喷射策略对加氢催化生物柴油/汽油RCCI(活性控制压燃)燃烧影响的可视化研究。结果表明:改变预主喷比例及主喷时刻可以调整燃烧室整体反应性和局部反应性,改善RCCI冷态燃烧效果。相较加氢催化生物柴油单次喷射策略,2次喷射策略下缸压和放热率曲线前移,燃烧相位提前。预主喷比例对燃烧相位影响显著,主喷比例越高,着火时刻越晚,燃烧持续期越短,放热过程越集中。主喷时刻对火焰发展机制影响显著,主喷时刻提前,火焰发展以燃烧室四周多点自燃向中心传播为主;主喷时刻推迟,火焰发展以沿喷雾油束向四周传播为主。 Reactivity controlled compression ignition(RCCI)is a clean and efficient combustion mode of internal combustion engine.At present,the research of RCCI is mostly studied under conventional conditions,and cold start is one of the important problems faced by the application of RCCI in automotive engines.Based on a dual-fuel optical engine,combined with high-speed imaging technology,this paper carries out a visual study of the effect of in-cylinder injection strategies on hydrogenated catalytic biodiesel(HCB)/gasoline RCCI combustion under cold conditions.Firstly,for gasoline port injection and HCB single direct injection strategy,an RCCI cold combustion test with different HCB injection timings(-30--15°CA ATDC)is carried out.The results show that,with the delay of injection timing,the ignition timing is delayed,and the peak of cylinder pressure and heat release rate first increase and then decrease.-25°CA ATDC is the optimal injection timing under the HCB single injection strategy,but the overall flame area is small and the light intensity is high,so the ignition and combustion characteristics need to be optimized.In view of the shortcomings of the HCB single injection strategy,an experimental study on the HCB double injection strategy is carried out.HCB main injection timing(-25--15°CA ATDC)and HCB pre-injection ratio(30%∶70%,70%∶30%)are used as the control parameters.Compared with the optimal condition called S-25/100%under the HCB single injection strategy,the ignition timing is advanced and the peak points of cylinder pressure and heat release rate moveforward under the HCB double injection strategy.When the pre-injection ratio is 30%and the main injection timing is-25°CA ATDC,the combustion efficiency improves most significantly and the soot emission is low,which is the best condition under the HCB double injection strategy.Different HCB injection parameters have different effects on the process of combustion and the law of flame development.The pre-injection ratio has a significant impact on the combustion phase.The higher the main injection ratio is,the later the ignition timing is,the shorter the combustion duration is,and the more concentrated the heat release process is.The main injection timing has a significant impact on the flame development mechanism:the main injection timing is earlier,and the flame development is mainly due to spontaneous combustion from multiple points around the combustion chamber to the center;the main injection timing is delayed,and the flame development is mainly spread along the spray oil beam to the surrounding area.The HCB double injection strategy can more flexibly adjust the overall reactivity and local reactivity of the combustion chamber by changing the injection timing and ratio,thereby optimizing the combustion performance.Compared with the HCB single injection strategy,the RCCI cold combustion performance can be improved.In this experiment,the combustion characteristics and the law of flame development under different HCB injection strategies are analyzed,and the appropriate HCB injection timing and proportion are determined.It is expected that the cold ignition and combustion characteristics of RCCI can be improved by regulating the high active fuel injection strategy,which provides experimental basis for the promotion and application of RCCI combustion mode in engines in the future.
作者 曹礼轩 王谦 钟汶君 刘旭 何志霞 CAO Lixuan;WANG Qian;ZHONG Wenjun;LIU Xu;HE Zhixia(School of Energy and Power Engineering,Jiangsu University,Zhenjiang 212013,China)
出处 《重庆理工大学学报(自然科学)》 CAS 北大核心 2023年第3期138-146,共9页 Journal of Chongqing University of Technology:Natural Science
基金 国家自然科学基金项目(51876083)。
关键词 活性控制压燃 喷射策略 可视化 冷态条件 加氢催化生物柴油 reactivity controlled compression ignition injection strategy optical engine cold combustion hydrogenated catalytic biodiesel
  • 相关文献

参考文献4

二级参考文献22

  • 1雷卫,苏万华.一种新的HCCI柴油机燃油喷雾特性的PLIF法测试装置[J].汽车工程,2004,26(4):405-408. 被引量:7
  • 2董敬 庄志.汽车拖拉机发动机(第二版)[M].机械工业出版社,1995..
  • 3Zhao F, Lai M C, Harrington D L. Automotive Spark-ignited Direct-injection Gasoline Engines [J]. Progress in Energy and Combustion Science 1999, 25: 437-562.
  • 4Horie K, Takahashi H, Akazaki S. Emission Re- duction During Warm-up Period by Incorporating a Wall-wetting Fuel Model on the Fuel Model on the Fuel Injection Strategy During Engine Starting [J]. SAE Paper, 952478,1995.
  • 5I.ee S, McGee J, Quay B, et al. A Comparison of Fuel Distribution and Combustion during Engine Cold Start for Direct and Port-fuel Injection Sys- tems[J]. SAE Paper, 1999-01-1490, 1999.
  • 6Lee S, Tong K, Quay B, et al. Effects of Swirl and Tumble on Mixture Preparation during Cold Start of a Gasoline Direct-injection Engine[J]. SAE Pa- per, 2000-01-1900, 2000.
  • 7Yamada T, Gardner D, Bruno B, et al. The Effects of Engine Speed and Injection Pressure Transients on Gasoline Direct Injection Engine Cold Start[J]. SAE Paper, 2002-01-2745, 2002.
  • 8Landenfeld T, Kufferath A, Gerhardt J. Gasoline Direct Injection - SULEV Emission Concept [J]. SAE Paper, 2004-01-0041, 2004.
  • 9Xu Z, Yi J, Wooldridge S, et al. Modeling the Cold Start of the Ford 3. 5L V6 EcoBoost Engine[J]. SAE Paper, 2009-01-1493, 2009.
  • 10Whitaker P, Shen Y, Fuch H, et al. Development of the Combustion System for a Flexible Fuel Tur- bocharged Direct Injection Engine[J]. SAE Paper, 2010-01-0585, 2010.

共引文献63

同被引文献27

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部