期刊文献+

行星滚柱丝杠1000 N·m传动效率试验台测量控制系统设计

Design of measurement and control system for 1000 N·m transmission efficiency test-bed of planetary roller lead screw
下载PDF
导出
摘要 为了研究不同公称直径的丝杠传动效率以提升行星滚柱丝杠产品的质量,为行星滚柱丝杠传动效率试验台设计了一套测量控制系统。系统采用西门子PLC作为控制核心,结合PID算法实现有效控制。通过NI公司的LabVIEW软件、数据采集板卡实现数据的精确采集、储存计算以及分析。试验结果表明,试验台可对扭矩在0~1000 N·m的行星滚柱丝杠进行测量,在额定载荷条件下行星滚柱丝杠的传动效率达到75%,加载精度控制在±1%范围内。 In order to study the transmission efficiency of lead screws with different nominal diameters and improve the quality of planetary roller lead screws,a set of measurement and control system is designed for the planetary roller lead screw transmission efficiency test-bed.The system uses Siemens PLC as the control core and PID algorithm to realize effective control.Accurate data acquisition,storage,calculation and analysis are realized through LabVIEW software and data acquisition board of NI Company.The test results show that the test-bed can measure the planetary roller lead screw with torque in the range of 0~1000 N·m.Under the rated load,the transmission efficiency of the planetary roller lead screw reaches 75%and the loading accuracy is controlled within±1%.
作者 江俊麟 夏鲲 张文君 JIANG Junlin;XIA Kun;ZHANG Wenjun(School of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China)
出处 《农业装备与车辆工程》 2023年第5期52-57,共6页 Agricultural Equipment & Vehicle Engineering
关键词 传动效率 行星滚柱丝杠 测量控制系统 方案设计 PID transmission efficiency planetary roller lead screw measurement control system scheme design PID
  • 相关文献

参考文献12

二级参考文献59

共引文献42

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部