期刊文献+

保温层下涂层耐腐蚀性能测试与评定方法研究

Research on Performance Test and Evaluation Methods of Corrosion Resistance for Coatings Under Insulation
下载PDF
导出
摘要 在实验室模拟保温层下腐蚀环境,针对不同的配套涂层体系开展了横置式方管和竖立式圆管循环腐蚀试验,筛选了不同涂层的保温层下耐腐蚀性,并对方管和圆管试验评价方法进行了对比和分析。结果表明:普通环氧酚醛漆、玻璃鳞片增强环氧酚醛漆以及惰性无机共聚物漆具备良好的耐保温层下腐蚀性能,含有机硅铝粉的涂层体系由于较薄的干膜厚度未通过测试。此外,相比于圆管试验,方管试验的试验条件更为苛刻,对不同涂层的筛选性更佳。 The cyclic corrosion tests for different coating systems were carried out by the horizontal square tube and the vertical tube simulation equipment respectively.The corrosion resistance performance of different coatings under insulation was evaluated,and the test methods of square tube and vertical tube were compared and discussed.The results showed that common phenolic epoxy coatings,glass flake reinforced phenolic epoxy coatings and inert inorganic copolymer coatings exhibited excellent corrosion resistance.However,the coating systems containing the silicone aluminum powder failed the test due to their poor dry film thickness.Besides,compared with the vertical tube test,the test conditions of the square tube were more severe,therefore showing a better screening performance for different coatings.
作者 于慧文 李晓炜 方瑶婧 骆惠 张雷 段永锋 Yu Huiwen;Li Xiaowei;Fang Yaojing;Luo Hui;Zhang Lei;Duan Yongfeng(SINOPEC Engineering Group Luoyang R&D Center of Technology,Luoyang,Henan 471003,China;Jotun Coatings(Zhangjiagang)Co.,Ltd.,Suzhou,Jiangsu 215000,China;CNOOC Changzhou Paint and Coatings Industry Research Institute Co.,Ltd.,Changzhou,Jiangsu 213016,China)
出处 《涂料工业》 CAS CSCD 北大核心 2023年第6期16-21,共6页 Paint & Coatings Industry
关键词 保温层下腐蚀 方管循环腐蚀试验 圆管试验 涂层体系 corrosion under insulation square tube cyclic corrosion test vertical tube test coating systems
  • 相关文献

参考文献7

二级参考文献65

  • 1李杰,林荣芳,常亚萍.泡沫夹克防腐蚀保温层的材料选择与结构设计[J].腐蚀与防护,2008,29(2):80-83. 被引量:12
  • 2郭中宝,刘杰民,范慧俐,李晓月,常洁美.颜填料对环氧改性有机硅耐高温涂料综合性能的影响[J].现代涂料与涂装,2007,10(3):13-14. 被引量:11
  • 3Fitzgerald B J, Stefan W. A Corrosion under insulation prevention strategy for petrochemical industry piping[J]. Corros. Management, 2004, 57: 15.
  • 4Pollock W I, Barnhart J M. Corrosion of metals under thermal insulation-ASTM special technical publication 880[R]. Philadelphia, Pennsylvania: ASTM, 1985.
  • 5Kumar M S, Sujata M, Venkataswamy M A, et al. Failure analysis of a stainless steel pipeline[J]. Eng. Failure Anal., 2008, 15: 497.
  • 6Ali B, Saud A S. Under insulation stress corrosion crack- ing of process piping[A]. Corrosion 2006 Conference & Expo[C]. HT: NACE, 2006. Paper No.06500.
  • 7Delahunt J F. Corrosion under thermal insulation and fire- proofing an overview[A]. Corrosion/2003[C]. HT: NACE, Paper No.03022, 2003.
  • 8Kane R D, Ashbaugh W G, McGowan N, et al. New Indus- try Standards, Test Procedures, and Surface Treatments Combat Corrosion under Insulation[A]. Corrosion source- 2000 Online SvmDosium[C]. Paner 0403, 2000.
  • 9Norsworthy R, Dunn P J. Corrosion under thermal insu- lation[J]. Coat. Linings, 2002.
  • 10Frank D V. Corrosion under insulation[J]. Process Safety Prog., 2009, 28(1): 3.

共引文献51

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部