期刊文献+

基于收扩喉部结构的非介入式发动机进气流量管设计

Design of non⁃intrusive engine intake flow pipe based on convergent⁃divergent throat structure
下载PDF
导出
摘要 针对航空发动机进气流量测量不准确的问题,设计了增加收扩喉部结构的新型发动机进气流量管。所设计结构对流场的整流作用,可以通过布置更少的测点获得更高的流量测量准确度;利用直管段与喉部产生的静压差,以非接触的方式获取进气流量,极大简化了试验现场进气流量测试方法。通过仿真与试验验证了设计方案的可行性,研究结果为航空发动机进气流量的准确测量提供了新的解决思路。 Aiming at the problem of inaccurate measurement of aero⁃engine intake flow,this paper investigates a new type of aero⁃engine flow pipe with a throat structure.Its advantage is that on the one hand,due to the optimization of the flow field by the throat structure,higher intake flow measurement accuracy can be obtained by arranging fewer measuring probes.On the other hand,the static pressure difference between the straight pipe section and the throat is used to obtain the flow in the pipe in a non⁃contact way,which greatly simplifies the test method of the inlet flow in the test site.The feasibility of the design scheme is verified by simulation and experiment.The research results provide a new solution for the accurate measurement of aero⁃engine intake flow.
作者 杨振 王毅 刘琳琳 YANG Zhen;WANG Yi;LIU Linlin(Changcheng Institute of Metrology&Measurement,Beijing 100095,China)
出处 《计测技术》 2023年第2期71-81,共11页 Metrology & Measurement Technology
基金 国家“十四五”技术基础项目(JSJL2020205A003)。
关键词 航空发动机 进气流量管 收数值仿真 收扩喉部结构 aero⁃engine flow pipe convergent⁃divergent throat structure
  • 相关文献

参考文献11

二级参考文献58

  • 1郑严.TRI60系列弹用涡轮喷气发动机剖析[J].飞航导弹,2001(1):34-42. 被引量:8
  • 2林广仁.紊流附面层测量数据的计算方法[J].航空发动机,1996,17(1):26-31. 被引量:3
  • 3PARK C W, LEE S J. Effects of free-end corner shape on flow structure around a finite flow[J] . Journal of Fluids and Structures 2004,19 : 141-158.
  • 4JESTER W, KALLINDERIS Y. Numerical study of incompressible flow about large wind tunnel [ J ] . Journal of Fluids and Structures ,2003,17:561-577.
  • 5李军.风洞收缩段曲线的数值模拟研究[J].中国科技论文在线.
  • 6Sarsvanamuttoo H I H. Recommended practices for measure- ment, of gas path pressures and temperatures for performance assessment of aircraft turbine engines and components [ R ]. AGARD AR - 245,1990.
  • 7Bui T T, Oates D L, Gonsalez J C. Design and evaluation of a new boundary-layer rake for flight testing [ R ]. NASA/TM - 2000 - 209014,2000.
  • 8姜健 史建邦 刘旭 等.曲面可压缩附面层的测量及其参数计算方法研究.气体物理(理论与应用),2009,.
  • 9YOSHINAKA M, ASAKURA E, KITANO M. Production method of zinc oxide whisker [ P ]. WO - 90/07022,1990 - 6 - 28.
  • 10YOSHINAKA M, ASAKURA E, MISAKI T. Zinc oxide whiskers having a tetrapod crystalline form and method for making the same[ P]. Europe: EP - 325797,1989 -02 - 08.

共引文献88

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部