期刊文献+

基于时空同步的机器人与ACFM协同检测系统

Robot and ACFM collaborative detection system based on space-time synchronization
下载PDF
导出
摘要 针对交流电磁场检测(ACFM)技术在机器人自动化检测过程中对时空同步的需求,围绕工业机器人与ACFM协同检测方法展开系统研究,解决机器人与ACFM协同检测过程中位置与磁场信号同步提取方法、三维磁场特征信号成像、缺陷量化与定位方法等关键问题。搭建完整的一套机器人与ACFM协同检测试验系统并对系统进行测试。结果表明,时空同步协同检测系统能够实现试件表面缺陷检测成像显示和精准定位与量化,位置同步精度为0.5 mm,可提升ACFM自动化检测过程中的效率和精度。 Aiming at the requirements of space-time synchronization in the process of robot automatic detection based on ACFM technology,the collaborative detection method of industrial robot and ACFM was systematically studied.The key problems such as synchronous acquisition method of position and magnetic field signal,threedimensional magnetic field characteristic signal imaging,defect quantification and location method in the process of cooperative detection of robot and ACFM were solved consequently.A complete set of robot and ACFM collaborative detection experimental system was developed and systematically tested.The results show that the experimental system of space-time synchronization can realize surface defect detection and imaging,precise positioning and quantification of surface defect in specimens.The location synchronization accuracy is 0.5 mm,which will promote the efficiency and accuracy of ACFM detection automation.
作者 杜颖 袁新安 武斌斌 韩敬艳 王汉 卞旭东 刘杰 DU Ying;YUAN Xin'an;WU Binbin;HAN Jingyan;WANG Han;BIAN Xudong;LIU Jie(Offshore Oil Engineering Co.,Ltd.CNOOC,Tianjin 300461,China;Center for Offshore Engineering and Safety Technology,China University of Petroleum(East China),Qingdao 266580,China)
出处 《无损检测》 CAS 2023年第5期56-63,共8页 Nondestructive Testing
基金 国家自然科学基金青年项目(52005512) 山东省自然科学基金(ZR201911040388)
关键词 交流电磁场检测技术 协同检测 时空同步 缺陷定位 三维成像 ACFM collaborative detection space-time synchronization defect location three-dimensional imaging
  • 相关文献

参考文献8

二级参考文献39

  • 1王艳颖,周晓军,程耀东,戴百鸣.复杂形状工件超声测量、曲面建模和超声检测一体化技术研究[J].组合机床与自动化加工技术,2004(8):11-12. 被引量:2
  • 2黄钧,王国荣,李国进,钟继光.焊接结构水下无损检测技术及其进展[J].无损检测,2005,27(4):207-211. 被引量:14
  • 3Kawaguchi Y, Yoshida I, Kurmatani H, et al. Development of an in-pipe inspection robot for iron pipes[J]. Journal of Robotics Society of Japan, 1996,14(1):137-143.
  • 4Tsubouchi T, Takaki S, Kawaguchi Y, et al. A straight pipe observation from the inside by laser spot array and a TV camera[A]. Proceedings of the 2000 IEEE/RSJ, International Conference on Intelligent Robots and Systems[C]. Tsukuba, Japan: IEEE/RSJ, 2000.
  • 5Kawaguchi Y, Yoshida I, Iwao K, et al. Sensors and crabbing for an in-pipe magnetic-wheeled robot[A]. IEEE/ASME International Conference on Advanced Intelligent Mechatronics'97[C]. Japan: The Robotics Society of Japan, 1997.68-75.
  • 6Kuntze H B, Haffner H. Experiences with the development of a robot for smart multisensoric pipe inspection[A]. IEEE International Conference on Robotics and Automation[C]. Leuven, Belgium: IEEE, 1998. 1773-1778.
  • 7Ma H W,Zhang X H,Wei J,Research on an Ultrasonic NDT System for Complex Surface Parts.Journal of Materials Processing Technology,2002,129:667-670.
  • 8吴瑞明.数字化超声检测系统及关键技术研究[D]:[博士学位论文].杭州:浙江大学,2005.3.
  • 9Ma H W,Zhang X H,Wei J.Research on an Ultrasonic NDT System for Complex Surface Parts[J].Journal of Materials Processing Technology,2002,129:667-670.
  • 10姜庆昌,王军,田春英.水浸超声C扫描检测系统扫描机构设计[J].佳木斯大学学报(自然科学版),2007,25(5):641-643. 被引量:8

共引文献66

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部