摘要
加筋板是船体结构的重要组成部分。采用一阶屈曲分析得到的加筋板失稳模态以局部变形为主,按一阶屈曲模态引入的初始缺陷不能很好反映船体甲板结构的整体缺陷,为了进一步推广高等分析法在船舶与海洋结构物中的应用,本文提出一种能反映船体整层甲板、舱段乃至全船结构整体缺陷分布的失稳模态型初始缺陷引入方式。采用有限元软件Ansys,对加筋板不同初始缺陷形态下的极限强度进行分析并与试验结果对比,验证了引入失稳模态型初始缺陷在加筋板极限强度计算中的可行性与有效性。有限元计算结果表明,与采用一阶屈曲型初始缺陷相比,采用失稳模态型初始缺陷得到的加筋板极限强度更低,更能保证结构的安全性。考虑失稳模态型初始缺陷,对31个单一参数变量加筋板进行极限强度分析。计算结果表明,在合理范围内增高加强筋是提高加筋板极限强度的最有效手段。
Stiffened panel is an important part of ship structure.The buckling modes of stiffened panels obtained by the first-order buckling analysis are mainly local deformation,and the initial imperfection introduced according to the first-order buckling mode can not reflect the overall imperfection of the ship deck structure very well.In order to further promote the application of the advanced analytical method in ships and offshore structures,this paper proposes an initial imperfection in-troduction method of instability mode which can reflect the overall imperfection distribution of the whole deck,cabin and even the whole ship structure.The finite element software Ansys is used to analyze the ultimate strength of stiffened panels with different initial imperfection,and the results are compared with the test results,which verifies the feasibility and effect-iveness of introducing the initial imperfection of instability mode in the calculation of ultimate strength of stiffened panels.The finite element results show that compared with the first-order buckling initial imperfection,the ultimate strength of the stiffened panels with initial imperfection of instability mode is lower,which can better ensure the safety of the structure.The ultimate strength of 31 stiffened panels with single parameter variable is analyzed by considering the initial imperfection of instability mode.The results show that increasing the height of stiffeners within a reasonable range is the most effective way to improve the ultimate strength of stiffened panels.
作者
李淇雯
张宜杰
邱国志
夏利娟
LI Qi-wen;ZHANG Yi-jie;QIU Guo-zhi;XIA Li-juan(School of Naval Architecture,Ocean and Civil Engineering,Shanghai Jiaotong University,Shanghai 200240,China;Shanghai Key Laboratory for Digital Maintenance of Buildings and Infrastructure,Shanghai 200240,China)
出处
《舰船科学技术》
北大核心
2023年第18期13-18,共6页
Ship Science and Technology
关键词
加筋板
极限强度
初始缺陷
失稳模态
stiffened panel
ultimate strength
initial imperfection
instability mode
