期刊文献+

传动机构用四点接触球轴承优化设计 被引量:2

Optimization Design of Four Point Contact Ball Bearings for Transmission Mechanism
下载PDF
导出
摘要 以QJ214四点接触球轴承为研究对象,建立以轴承额定动载荷和摩擦力矩为目标函数,以轴承内圈沟曲率半径系数、外圈沟曲率半径系数、钢球直径、球组节圆直径、原始接触角为设计变量的优化模型,采用遗传算法对四点接触球轴承进行优化,并基于四点接触球轴承拟静力学模型研究轴承接触角的变化。结果表明:优化后轴承的内圈沟曲率半径系数为0.520,外圈沟曲率半径系数为0.531,钢球直径为17.600 mm,球组节圆直径为97.811 mm,接触角为35°,工作接触角均大于垫片角,额定动载荷增大了1.592%,摩擦力矩减小了4.051%。 Taking QJ214 four point contact ball bearings as research objects,an optimization model is established with dynamic load rating and friction torque of the bearings as objective functions,and curvature radius coefficient of inner raceway and outer raceway,diameter of steel ball,pitch diameter of ball set and original contact angle of the bearings as design variables.The genetic algorithm is used to optimize the bearings,and the change of contact angle of the bearings is studied based on quasi-static model of the bearings.After optimization,curvature radius coefficient of inner raceway and outer raceway,diameter of steel ball,pitch diameter of ball set,contact angle are respectively 0.520,0.531,17.600 mm,97.811 mm,35°,and the optimized working contact angle of the bearings is greater than gasket angle.The results show that the dynamic load rating increases by 1.592%,and the friction torque decreases by 4.051%.
作者 王亚涛 邱明 赵滨海 田凯文 王会杰 WANG Yatao;QIU Ming;ZHAO Binhai;TIAN Kaiwen;WANG Huijie(School of Mechatronics Engineering,Henan University of Science and Technology,Luoyang 471003,China;Henan Collaborative Innovation Center for Advanced Manufacturing of Mechanical Equipment,Luoyang 471003,China;Luoyang Bearing Research Institute Co.,Ltd.,Luoyang 471039,China)
出处 《轴承》 北大核心 2023年第10期39-44,共6页 Bearing
基金 国家重点研发计划资助项目(2019YFB2004403) 中科院战略性先导科技专项资助项目(XDC04040301)。
关键词 滚动轴承 四点接触球轴承 拟静力学模型 结构参数 遗传算法 接触角 rolling bearing four point contact ball bearing quasi-static model structural parameter genetic algorithm contact angle
  • 相关文献

参考文献9

二级参考文献43

共引文献74

同被引文献15

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部