摘要
环境氛围对再生光纤光栅的温度特性有直接影响,文中将不同的环境氛围引入高温再生光纤光栅的制作过程,分析了850℃高温退火温度下光栅中心波长随时间的演化规律,获取了种子光栅擦除与再生光栅的生长特点。以紫外激光刻写的光纤光栅作为种子光栅,光纤涂覆层为聚酰亚胺,对比分析空气和氮气作为环境氛围的再生光纤光栅的性能。两种再生光纤光栅的反射率相差不大,然而在350~750℃升降温循环下,氮气环境氛围下的再生光纤光栅具有较好的温度稳定性,在700℃时其测温精度可达±2.9℃。氮气环境氛围条件下制备的再生光纤光栅有助于提升其稳定性及测量精度,在高温测量领域具有潜在的应用前景。
Objective TypeⅠfiber Bragg grating can work well below the temperature of 300℃.However,when the temperature further rises,the reflectivity of TypeⅠfiber Bragg grating will be reduced.If it operates in high temperature for a long time,the fiber Bragg grating will fail.There is a new type of grating called regenerated fiber Bragg grating attracting worldwide attention that promised to solve the problem.It is essentially formed from the initial TypeⅠ"seed"grating,precipitating through thermal processing with a structure that is set by the laser written seed.Regenerated fiber Bragg grating is an important optical fiber sensor for high-temperature sensing.But the stability and repeatability of the regenerated fiber Bragg grating under high temperature is less commonly reported,especially for different environmental atmospheres.For this purpose,environmental atmospheres are introduced during the process of regeneration and testing in this paper.Method Air and nitrogen environmental atmospheres are designed during the regeneration of two typeⅠseed gratings written by UV laser.The whole regeneration process is performed in a high-temperature furnace and recorded by optical spectrum analyzer and fiber Bragg grating interrogator(Fig.1).The temperature characteristic of the obtained regenerated fiber Bragg grating is tested by fiber Bragg grating interrogator under air and nitrogen environmental atmospheres(Fig.2).The regeneration results are shown in the form of evolution of central wavelength and transmission depth(Fig.5).The repeatability and stability of the regenerated fiber Bragg gratings are characterized by wavelength(Fig.6-8).And the temperature accuracy is verified at 700℃.Results and Discussions The reflectivity of the two kinds of regenerated fiber gratings is not much different.The one in air has a reflectivity of 21.68%,and the other in nitrogen has a similar value of 21.73%.However,under the temperature cycle of 350-750℃,the regenerated fiber grating in the nitrogen environment has good temperature stability,and the temperature measurement accuracy can reach±2.9℃at 700℃.The regenerated fiber grating prepared under the condition of nitrogen atmosphere is helpful to improve its stability and measurement accuracy.Conclusion The fabrication methods of regenerated fiber Bragg gratings under two different atmospheres of air and nitrogen are studied.The whole process record of regeneration of seed gratings written by ultraviolet laser at a high temperature of 850℃is obtained,and the temperature characteristics and temperature measurement accuracy of the above two kinds of gratings are systematically studied.The research results show that the regenerated fiber Bragg gratings obtained under the heating atmosphere of air and nitrogen have similar reflectivity,but the growth of regenerated fiber Bragg grating under nitrogen is faster and has good thermal stability,and its temperature measurement accuracy can reach up to±2.9℃.Therefore,changes in the environmental atmosphere will affect the thermal stability and temperature measurement repeatability of regenerated fiber Bragg grating.By optimizing the fabrication method of regeneration,regenerated fiber Bragg grating will play an important role in the field of high-precision high-temperature measurement.
作者
孙亚丽
田婧
张钰民
姚霁峰
吕峥
祝连庆
Sun Yali;Tian Jing;Zhang Yumin;Yao Jifeng;Lv Zheng;Zhu Lianqing(Photoelectric Information and Instruments Beijing Engineering Research Center,Beijing Information Science and Technology University,Beijing 100016,China;Key Laboratory of Modern Measurement and Control Technology Ministry of Education,Beijing 100192,China;Beijing Key Laboratory of Photoelectric Testing Technology,Beijing Information Science and Technology University,Beijing 100192,China)
出处
《红外与激光工程》
EI
CSCD
北大核心
2023年第11期270-277,共8页
Infrared and Laser Engineering
基金
北京市自然科学基金项目(4212048)。
关键词
再生光纤光栅
环境氛围
高温退火
稳定性
重复性
regenerated fiber Bragg grating
environment atmosphere
high-temperature annealing
stability
repeatability
