摘要
采用OM、XRD技术对高磁感取向硅钢二次再结晶过程显微组织和晶体织构进行分析研究,结果表明:高磁感取向硅钢二次再结晶温度区间为1015~1030℃;高斯晶粒异常长大前,初次再结晶晶粒长大缓慢,1010℃时初次晶粒尺寸为25.9μm;初次晶粒织构集中在{113},异常长大的晶粒为位向准确的高斯取向晶粒。
The microscopic structures and crystal textures of a high magnetic oriented silicon steel were analyzed by OM and XRD.The results showed that:the temperature interval of secondary recrystallization of high magnetic oriented silicon steel is between 1015℃and 1030℃;the first recrystallized grains grew slowly before the Goss grain grows abnormally,and the initial grain size at 1010℃is 25.9μm;the primary grain texture is concentrated at{113},and the abnormally grown grains are accurate Goss orientation grains.
作者
樊立峰
付余洁
岳尔斌
胡文豪
裘韶均
金进文
王德斌
欧阳炜
张博睿
韦泽
FAN Lifeng;Fu Yujie;YUE Erbin;HU Wenhao;QIU Shaojun;JIN Jinwen;WANG Debin;OUYANG Wei;ZHANG Borui;WEI Ze(School of Materials Science and Engineering,Inner Mongolia University of Technology,Hohhot 010051,China;Zhejiang Metallurgical Research Institute Co.,Ltd.,Hangzhou 310011,China;Ningbo Iron and Steel Co.,Ltd.,Ningbo 315807,China)
出处
《电工钢》
CAS
2023年第6期14-18,共5页
ELECTRICAL STEEL
基金
国家自然科学基金(52361025),内蒙古科技计划项目(2022ZY0001,2020GG0265,2022YFHH0079),内蒙古自治区“高等学校青年科技人才发展项目”(NJYT23116)。
关键词
取向硅钢
二次再结晶
组织
织构
oriented electrical steel
secondary recrystallization
microstructure
texture
