期刊文献+

两种镍钛器械预备后牙根管的临床效果分析

Clinical analysis of preparation effects with two types of nickel-titanium instruments in posterior root canals
下载PDF
导出
摘要 目的 比较M3-Pro镍钛锉与ProTaper镍钛锉对后牙进行根管预备的临床效果。方法 选取牙髓炎或根尖周炎的患牙60颗,随机分为两组,每组91个根管,分别使用M3-Pro镍钛锉、ProTaper镍钛锉进行根管预备。1周后对符合充填指征的患牙行根管充填。比较两组根管预备时间、诊间疼痛率、器械分离发生率及根管恰填率。结果 M组和P组的单个根管预备时间分别为(5.53±0.40) min和(6.49±0.38) min,差异有统计学意义(P<0.05)。两组均未发生器械分离,诊间疼痛率和根管恰填率均差异无统计学意义(P>0.05)。结论 M3-Pro镍钛锉与ProTaper镍钛锉均能达到良好的根充效果,术后疼痛率与器械分离发生率低。M3-Pro镍钛锉工作效率更高,且有价格优势,值得在临床上推广使用。 【Objective】To compare the preparation effects by using M3-Pro and ProTaper nickel-titanium files in posterior root canals.【Methods】A total of 60 posterior teeth diagnosed as pulpitis or periapical periodontitis were randomly divided into 2 groups,with 91 root canals per group.Group M was treated with M3-Pro files and group P with ProTaper files.One week later,the root canals of affected teeth meeting the filling indication were filled.Single root canal preparation time,inter-appointment pain rate,instrument separation rate and perfect filling rate were compared.【Results】The single root canal preparation time in group M and group P was 5.53±0.40 min and 6.49±0.38 min respectively,and the difference was statistically significant(P<0.05).No instrument separation occurred.There were no significant differences between two groups in inter-appointment pain rate and perfect filling rate(P>0.05).【Conclusion】Both M3-Pro and ProTaper nickel-titanium files can achieve good root canal filling effects and have low incidence rate of inter-appointment pain and instrument separation.M3-Pro nickel-titanium files have higher working efficiency and a price advantage.In conclusion,M3-Pro nickel-titanium files are worth promoting in clinic.
作者 薛婷 XUE Ting(Department of Stomatology,Qilu Hospital of Shandong University(Qingdao),Qingdao,Shandong 266035,China)
出处 《中国医学工程》 2023年第12期80-82,共3页 China Medical Engineering
关键词 镍钛器械 M3-Pro PROTAPER 根管预备 nickel-titanium instruments M3-Pro ProTaper root canal preparation
  • 相关文献

参考文献10

二级参考文献41

  • 1袁理,岳林,王嘉德.根管弯曲度对根管锉疲劳寿命的影响[J].现代口腔医学杂志,2007,21(6):630-632. 被引量:2
  • 2Shen Y, Cheung GS, Peng B, et al. Defects in nickel-titanium instruments after clinical use. Part 2: fractographic analysis of fractured surface in a cohort study. J Endod, 2009, 35 (1): 133-136.
  • 3Bulem UK, Kececi AD, Guldas HE. Experimental evaluation of cyclic fatigue resistance of four different nickel-titanium instruments after immersion insodium hypochlorite and/or sterilization. J Appl Oral Sei, 2013, 21(6): 505-510.
  • 4Plottino G, Grande NM, Cordaro M, et al. A review of cyclic fatigue testing of nickel-titanium rotary instruments. J Endod, 2009, 35(11): 1469-1476.
  • 5Shen Y, Qian W, Abtin H, et al. Fatigue testing of controlled memory wire nickel-titanium rotary instruments. J Eudod, 2011, 37(7): 997-1001.
  • 6Shen Y, Qian W, Abtin H, et al. Effect of environment on fatigue failure of controlled memory wire nickel-titanium rotary instruments. J Endod, 2012, 38(3): 376-380.
  • 7M-Sudani D. Topographic analysis of hyFlex controlled memory nickel-titanium files. J Int Oral Health, 2014, 6(6): 1-4.
  • 8McKelvey AL, Ritchie RO. Fatigue-crack growth behavior in the superelastic and shape-memory material nitinol. Metall Mater Trans A, 2001, 32A: 731-743.
  • 9Braga LC, Faria Silva AC, Buono VT, et al. Impact of heat treatments on the fatigue resistance of different rotary nickel- titanium instruments. J Endod, 2014, 40(9): 1494-1497.
  • 10Gambarini G, Grande NM, Plotino G, et al. Fatigue resistance of engine-driven rotary nickel-titanium instruments produced by new manufacturing methods. J Endod, 2008, 34 (8): 1003-1005.

共引文献61

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部