摘要
利用标量磁位法获得了三轴环板式永磁齿轮(Triple-shaft Ring-plate Magnet Gear,TRMG)的气隙磁场数理模型,根据磁场叠加原理建立了内、外永磁圈间气隙磁场及其相应的电磁转矩模型;由于所有计算均基于TRMG的平面磁场建立,因此,所建模型与二维有限元结果间具有较高的准确度(误差≤5%);其计算速度远快于三维有限元法,且与二维及三维有限元分析具有较好的吻合度与趋势性,验证了所建模型的准确性,可适用于三轴以上的多轴环板式永磁齿轮的磁场分析与结构动力学计算。
In this research,the mathematical and physical model of the air-gap magnetic field for the triple-shaft ring-plate magnet gear(TRMG)is obtained by means of the scalar magnetic potential method,and the air-gap magnetic field between inner and outer permanent magnet rings and its corresponding electromagnetic torque model are established according to the principle of the magnetic field superposition.Since all calculations are based on the TRMG plane magnetic field,the accuracy between the model and the two-dimensional finite element results is relatively high(error≤5%).The calculation speed of the model is much faster than that of the three-dimensional finite element method,and it has good agreement and trend with the two-dimensional and three-dimensional finite element analysis,which verifies the correctness of the model.It can be used in magnetic field analysis and structural dynamics calculation of multishaft ring-plate magnet gears with three or more shafts.
作者
刘东宁
葛研军
杨均悦
王大明
Liu Dongning;Ge Yanjun;Yang Junyue;Wang Daming(School of Mechanical Engineering,Dalian Jiaotong University,Dalian 116028,China)
出处
《机械传动》
北大核心
2024年第1期46-51,74,共7页
Journal of Mechanical Transmission
基金
国家自然科学基金项目(51375063)
辽宁省教育厅自然科学研究重点攻关项目(JDL2020001)。
关键词
三轴环板式永磁齿轮
标量磁位法
气隙磁场
电磁转矩
Triple-shaft ring-plate magnet gear
Scalar magnetic potential method
Air-gap magnetic field
Electromagnetic torque
