摘要
为实现完整熔池表面形貌三维传感,构建了双棱镜单摄像机立体视觉传感系统.针对熔池图像纹理缺乏造成的立体匹配困难的问题,引入了全局优化的变分立体匹配算法,通过建立包含灰度差异数据项和空间连续性约束项的能量函数的可行性泛函,经过迭代求解获得具有丰富细节的熔池表面稠密视差图.对自制非标准凹面形状进行立体匹配和三维重建,结果表明,宽度误差小于3.16%,深度误差小于4.82%.基于该算法实现了熔化极气体保护焊(gas metal arc welding,GMAW)的堆焊及V形坡口对焊条件下,不同熔透状态熔池稠密视差图计算和表面形貌的三维重建.
In order to realize the complete three-dimensional sensing of weld pool surface morphology,a stereo vision sensing system with biprism and single camera was constructed.Aiming at the difficulty of stereo matching caused by the lack of texture in weld pool map,a globally optimized variational stereo matching algorithm was introduced.By establishing the feasibility function of energy function containing gray difference data item and spatial continuity constraint item,the dense disparity figure of weld pool surface with rich details was obtained through iterative.The results of stereo matching and three-dimensional reconstruction of the self-made non-standard concave shape show that the width error is less than 3.16%and the depth error is less than 4.82%.Based on this algorithm,the dense disparity map of weld pool surface is calculated and reconstructed under the conditions of bead on plate and V-groove butt welding with different penetration states.
作者
梁志敏
高旭
任政
武子琴
王立伟
汪殿龙
LIANG Zhimin;GAO Xu;REN Zheng;WU Ziqin;WANG Liwei;WANG Dianlong(School of Material Science and Engineering,University of Science and Technology,Shijiazhuang,050000,China;Hebei Key Laboratory of Material Near-net Forming Technology,Shijiazhuang,050000,China)
出处
《焊接学报》
EI
CAS
CSCD
北大核心
2024年第2期61-66,I0006,共7页
Transactions of The China Welding Institution
基金
国家自然科学基金资助项目(51875168)
河北省自然科学基金资助项目(E2020208089).
关键词
熔池形貌
三维重建
变分立体匹配算法
熔化极气体保护焊
weld pool appearance
three-dimensional reconstruction
variational stereo matching algorithm
gas metal arc welding
