期刊文献+

国产加氢催化剂HYT-6319及HC-185 LT/HC-53 LT的工业应用

Industrial application of domestic HYT-6319 and HC-185 LT/HC-53 LT hydrogenation catalysts
下载PDF
导出
摘要 在中国石油广东石化公司370万t/a加氢裂化装置中,以中质减压蜡油和重芳烃的混合油(二者质量比97∶3)为原料,使用经UOP公司授权由中国石油抚顺石化公司生产的加氢精制催化剂HYT-6319和加氢裂化催化剂HC-185 LT/HC-53 LT进行了工业应用,考察了催化剂运行情况、产品性质及其分布。结果表明:在催化剂运行中,一段精制、一段裂化、二段裂化反应器各床层入口平均温度依次比设计值低23.5~38.7,22.8~25.0,34.3~44.9℃,一段精制反应器床层平均温升比设计值低10.1℃,一段裂化、二段裂化反应器床层平均温升比设计值分别高3.4,3.6℃;柴油和航空煤油产品均满足国Ⅵ标准,重石脑油含硫(氮)量均小于0.5μg/g,是优质的重整装置原料,轻石脑油含硫量为2.8μg/g,是优质的乙烯裂解原料;主要产品重石脑油、航空煤油、轻石脑油、柴油的收率依次为48.62%,25.28%,5.47%,14.14%,产品总收率为93.51%,比设计值高0.04个百分点。 In the 3.70 Mt/a hydrocracking unit of Guangdong Petrochemical Company of PetroChina,a mixture of medium quality vacuum wax oil and heavy aromatics(with the mass ratio of 97∶3)was used as raw oil.The hydrofining catalyst HYT-6319 and hydrocracking catalyst HC-185 LT/HC-53 LT produced domestically by Fushun Petrochemical Company of PetroChina and authorized by UOP Company were used for industrial application.The catalysts operation,product properties and distribution were investigated.The results showed that during the operation of the catalysts,the average temperature at the inlet of each bed layer in the first refining,first cracking,and second cracking reactors was lower than the design value by 23.5-38.7,22.8-25.0,34.3-44.9℃,respectively.The average temperature rise of the bed layer in the first refining reactor was lower than the design value by 10.1℃,and the average temperature rise of the bed layer in the first cracking and second cracking reactors was higher than the design value by 3.4,3.6℃,respectively.Both diesel and aviation kerosene products met the nationalⅥstandard,and the sulfur(nitrogen)content of heavy naphtha was less than 0.5μg/g and being a high-quality raw material for reforming units.The sulfur content of light naphtha was 2.8μg/g and being a high-quality ethylene cracking raw material.The yield of the main products including heavy naphtha,aviation kerosene,light naphtha,and diesel was 48.62%,25.28%,5.47%,and 14.14%,respectively.The total yield of product was 93.51%.It was higher than the design value by 0.04 percentage points.
作者 康海南 朱赫礼 罗毅 KANG Hai-nan;ZHU He-li;LUO Yi(3rd Refinery Production Department of Guangdong Petrochemical Company,PetroChina,Jieyang 515299,China)
出处 《石化技术与应用》 CAS 2024年第2期129-133,共5页 Petrochemical Technology & Application
关键词 加氢裂化 加氢精制 催化剂 柴油 航空煤油 重石脑油 收率 hydrocracking hydrorefining cata-lyst diesel oil aviation kerosene heavy naphtha yield
  • 相关文献

参考文献3

二级参考文献40

  • 1聂红,胡志海,石亚华,李大东.RIPP加氢裂化技术新进展[J].石油炼制与化工,2006,37(6):9-13. 被引量:23
  • 2刘海燕,于建宁,鲍晓军.世界石油炼制技术现状及未来发展趋势[J].过程工程学报,2007,7(1):176-185. 被引量:70
  • 3关明华,杜艳泽,王凤来,石友良.FC-32加氢裂化催化剂使用性能研究[J].石油化工技术经济,2007,23(3):33-38. 被引量:6
  • 4孙发民.新型介孔分子筛加氢裂化催化剂的研制[J].工业催化,2007,15(11):24-26. 被引量:7
  • 5Pang W,Kuramae M,Kinoshita Y,et al.Plugging problems observed in severe hydrocracking of vacuum residue[J].Fuel,2009,88(4):663-669.
  • 6Guan C,Wang Z,Que G,et al.Upgrading petroleum residue by two-stage hydrocracking[J].Fuel Processing Technology,2003,85(2/3):165-172.
  • 7Jeannie Stell.2004 Worldwide refining survey[J].Oil&Gas Journal,2004,10:15-39.
  • 8Lawrence R,Myers D,Gala H,et al.Hydrocracking technology innovations for seasonal and economic flexibility[C]∥NPRA Annual Meeting.Phoenix:NPRA,2010:AM-10-144.
  • 9Long R,Picioccio K,Zagoria A.Hydrogen solutions for improved profits[C]∥NPRA Annual Meeting.San Antonio:NPRA,2011:AM-11-62.
  • 10Mukherjee U,Dahlberg A J,Kemom A.Maximizing hydrocracker performance using ISOFLEX technology[C]∥NPRA Annual Meeting.San Francisco:NPRA,2005:AM-05-71.

共引文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部