期刊文献+

质子交换膜燃料电池极板及其表面改性研究进展

Research Progress on Surface Modification of Bipolar Plates for Proton Exchange Membrane Fuel Cells
原文传递
导出
摘要 在质子交换膜燃料电池(proton exchange membrane fuel cells,PEMFCs)的部件中,双极板(bipolar plates,BPs)是重要组成部分。双极板约占燃料电池成本、质量、体积的40%、80%、50%。传统的PEMFCs因为石墨双极板的材料、工艺等问题,造成其体积和质量较大,这增加了汽车的重量,缩小了汽车底盘的可用空间,影响了质子交换膜燃料电池汽车的性能。因此开发体积小、成本低、制备工艺简单的双极板对推进质子交换膜燃料电池的商业化应用具有重要意义。金属双极板因其成本低、力学性能好、导电性、导热性、体积相对易控等特点,在PEMFCs领域备受关注。但金属双极板在PEMFCs环境中易生成钝化膜,导致其接触电阻增加。因此,如何在提高金属双极板耐蚀性的同时,保持良好的导电性,是当前对PEMFCs研究的重点。本文综述了石墨、复合材料和金属双极板制备工艺及表面改性方法。讨论了双极板及其表面碳化物涂层、金属涂层和氮化物涂层的优缺点,并比较了这些涂层在PEMFCs环境下的耐腐蚀性和界面接触电阻性能。 In proton exchange membrane fuel cells(PEMFCss)components,the bipolar plate is the most important part due to its high proportion of the cost,mass and volume of PEMFCs(45%,80%and 50%).Because of the material and process problems of the bipolar plate,the volume and mass of the traditional graphite PEMFCs are relatively large,which increases the vehicle mass,reduces the available space of the vehicle chassis,and affects the performance of the PEMFCs vehicle.Therefore,the development of a lightweight,low-cost and simple preparation process for the bipolar plate is of great significance to promote its commercial application.The metal bipolar plate has attracted much attention in the PEMFCs field because of its low cost,good mechanical properties,electrical conductivity,thermal conductivity,and relatively easy-to-control volume.However,in the PEMFCs environment,the metal bipolar plate is easy to form a passivation film,which leads to an increase in its contact resistance.Therefore,improving the corrosion resistance of metal bipolar plates and maintaining good conductivity are the main focuses of current research on PEMFCs.The graphite-type,composite,and metal bipolar plate preparation processes or surface modification methods were summarized,and the advantages and disadvantages of bipolar plate or carbide coatings,metal coatings and nitride coatings on surface were discussed.In addition,the corrosion resistance and interfacial contact resistance performance of these coatings under the PEMFCs environment were compared.
作者 王瑜 邵文婷 武上焜 杨巍 陈建 Wang Yu;Shao Wenting;Wu Shangkun;Yang Wei;Chen Jian(School of Materials Science and Chemical Engineering,Xi’an Technological University,Xi’an 710021,China)
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2024年第3期902-932,共31页 Rare Metal Materials and Engineering
基金 国家自然科学基金(52101094) 中国博士后科学基金(2020M683670XB) 陕西省教育厅科研计划项目(21JP053)。
关键词 质子交换膜燃料电池 双极板 表面改性 涂层 导电性 耐蚀性 PEMFCs bipolar plate surface modification coating electrical conductivity corrosion resistance
  • 相关文献

参考文献35

二级参考文献264

共引文献350

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部