摘要
Based on the 3D seismic data and the analysis and test data of lithology,electricity,thin sections and chronology obtained from drilling of the Qiongdongnan Basin,the characteristics and the quantitative analysis of the source-sink system are studied of the third member of the Upper Oligocene Lingshui Formation(Ling 3 Member)in the southern fault step zone of the Baodao Sag.First,the YL10 denudation area of the Ling 3 Member mainly developed two fluvial systems in the east and west,resulting in the formation of two dominant sand transport channels and two delta lobes in southern Baodao Sag,which are generally large in the west and small in the east.The evolution of the delta has experienced four stages:initiation,prosperity,intermittence and rejuvenation.Second,the source-sink coupled quantitative calculation is performed depending on the parameters of the delta sand bodies,including development phases,distribution area,flattening thickness,area of different parent rocks,and sand-forming coefficient,showing that the study area has the material basis for the formation of large-scale reservoir.Third,the drilling reveals that the delta of the Ling 3 Member is dominated by fine sandstone,with total sandstone thickness of 109-138 m,maximum single-layer sandstone thickness of 15.5-30.0 m,and sand-to-strata ratio of 43.7%-73.0%,but the physical properties are different among the fault steps.Fourth,the large delta development model of the small source area in the step fault zone with multi-stage uplift is established.It suggests that the episodic uplift provides sufficient sediments,the fluvial system and watershed area control the scale of the sand body,the multi-step active fault steps dominate the sand body transport channel,and local fault troughs decide the lateral propulsion direction of the sand body.The delta of the Ling 3 Member is coupled with fault blocks to form diverse traps,which are critical exploration targets in southern Baodao Sag.
基金
Supported by the CNOOC Technology Research Project(KJGG2022-0102)。