摘要
粘贴钢板加固技术因其施工快速、加固效果好、适应性强、经济效益高等优势,在水利、电力等行业内的结构改造和加固补强等方面被广泛应用。基于有限元分析,针对某水电站厂房楼板局部开挖后所采用的粘贴钢板加固措施进行探讨,结果表明,楼板开挖后,开挖孔洞周边出现明显应力集中现象,孔洞交界处应力最大值增大了57.89%;粘刚加固措施显著提升了楼板结构的稳定性,相较于未加固情况下,楼板最大变形降低幅度可达50%,对于该水电站的楼板改建计划提供了安全保障,亦可为后续相关工程建设起到一定借鉴意义。
Because of its advantages of fast construction,good reinforcement effect,strong adaptability and high economic benefits,adhesive steel plate reinforcement technology has been widely used in structural transformation and reinforcement in water conservancy,electric power and other industries.Based on the finite element analysis,the paper discusses the reinforcement measures adopted by the steel plate after the partial excavation of the floor of a hydropower station.The results show that there is obvious stress concentration around the hole after the excavation,and the maximum stress at the junction of the hole increases by 57.89%.The reinforcement measures significantly improve the stability of the floor structure,and the maximum deformation of the floor can be reduced by 50%compared with the condition without reinforcement,which provides a safety guarantee for the floor reconstruction plan of the hydropower station,and also plays a certain reference for the subsequent construction of related projects.
作者
刘星
覃源
Liu Xing;Qin Yuan(PowerChina Northwest Engineering Co.,Ltd.,Xi'an 710065,Shaanxi;State Key Laboratory of Eco-hydraulics in Northwest Arid Region of China,Xi'an University of Technology,Xi'an 710048,Shaanxi)
出处
《陕西水利》
2024年第7期9-13,共5页
Shaanxi Water Resources
关键词
粘刚加固
位移变形
应力分布
ABAQUS
Adhesive reinforcement
displacement and deformation
stress distribution
ABAQUS
