摘要
为提高石英挠性加速度计的量程,分析了石英挠性加速度计量程受限机理,确认电磁反馈力与质量摆质心不重合是加速度计量程受限的主要原因。在此基础上,采用减小加工与装配误差和提高质量摆抗扭刚度的方法来提高石英挠性加速度计量程,并通过样机验证了该技术措施的有效性。
To improve the range of quartz-flex accelerometers,this study analyzes the mechanism affecting this range and confirms that the primary reason for the restricted range is that the center of the electromagnetic feedback force is not superposed on the center of mass of the mass pendulum.Based on the analysis,methods for improving the range are presented by reducing the deviation of mechanical machining and assembly and increasing the torsion resistance of the mass pendulum,the efficiency of which is confirmed by prototypes.
作者
彭志高
王勇
张占伟
李晓爱
汪胜琴
PENG Zhigao;WANG Yong;ZHANG Zhanwei;LI Xiao’ai;WANG Shengqin(The 26th Institute of China Electronics Technology Group Corporation,Chongqing 400060,China;Chongqing Solid Inertial Technology Enterprise Engineering Technology Research Center,Chongqing 401332,China;Chongqing Solid Inertial Technology Engineering Laboratory,Chongqing 401332,China)
出处
《压电与声光》
CAS
北大核心
2024年第4期603-608,共6页
Piezoelectrics & Acoustooptics
关键词
石英挠性加速度计
量程
质量摆
质心
电磁力作用中心
quartz-flex accelerometer
range
mass pendulum
center of mass
center of electromagnetic force