摘要
为了研究不同锅形对茶叶整理成条的效果,建立了多槽锅式茶叶理条机的U型和斜型锅体的曲线模型,在对锅内茶叶进行受力分析和运动学分析的基础上,基于MATLAB编程得到了茶叶在槽锅内的运动轨迹和运动规律。研究结果表明,根据茶叶运动时与锅底面接触的长度分析,斜型锅对茶叶的理条作用较强。该研究提供了多槽锅式茶叶理条机结构参数的一种优化方法。
In order to enhance the triangle groooving holloware tea carding machine, the curve models of U-and oblique-type pot body were established, and on the basis of force analysis and kinematics analysis of the tea in the pots, the movement trajectory and movement law of tea in U-and oblique-type pot body were obtained by MATLAB programming. The result shows, according to the length of the contact between the tea and the bottom of the pot during tea movement, the oblique-type pot has a stronger effect on the tea carding character. This study provides an optimization of structural parameters for triangle groooving holloware tea carding machine.
作者
李青绵
李革
苏鸿
LI Qing-mian;LI Ge;SU Hong(Zhjiang Machinery Industry Information Institute,Hangzhou 310009,China;Faculty of Mechanical Engineering&Automation,Zhejiang Sci-Tech University,Hangzhou 310018,China;Hangzhou Qiandao Lake Fengkai Industrial Co.,Ltd.,Hangzhou 311071,China)
出处
《机电工程》
CAS
北大核心
2019年第3期307-310,315,共5页
Journal of Mechanical & Electrical Engineering
基金
国家重点研发计划项目(2018YFD0700500)
关键词
茶叶
锅体曲线
运动
仿真
理条效果
tea
hollowware-shaped curve
movement
simulation
carding effect
