摘要
空间等离子体环境效应导致的卫星表面充放电是造成卫星在轨工作异常及故障的重要原因之一.太阳帆板驱动机构(Solar Array DriveAssembly,SADA)是长寿命、大功率卫星电传输环节的关键部件,易成为充放电效应的对象,可使卫星丧失能源,导致整星失效.为验证空间等离子体环境导致的表面充放电对SADA特别是其功率传输可靠性和安全性的影响,利用等离子体环境模拟试验装置,模拟地球同步轨道(Geostationary Orbit,GEO)等离子体环境,针对SADA进行试验研究.结果表明,使用两种不同绝缘材料的SADA在空间等离子体模拟环境下表现没有明显区别,表面充放电未对设计合理的SADA正常工作造成明显影响.研究结果对未来GEO轨道SADA等空间机构的可靠性和安全性设计具有一定指导意义.
The spacecraft surface charging and discharging resulting from the space plasma environment is one of the main causes of spacecraft abnormity and malfunction.Solar Array Drive Assembly(SADA) is a crucial component of the electrical transfer sub-assembly of the modern long life and large power satellite,which is used to rotate the solar array to follow sunlight for maximum energy acquisition,as well as transfer power and signals from the solar array to satellite.SADA is installed at the interface of spacecraft body and outer space,so it is directly exposed to the space plasma environment and prone to the adverse effects of charging and discharging.When SADA malfunctions,the satellite will lose energy and results a failure of the whole satellite.In order to test the influence of surface charging and discharging by the space plasma environment on SADA,especially its power transfer reliability and safety,a plasma environment simulation device simulating the plasma environment in the GEO orbit,was utilized to conduct experimental test on a SADA.The SAD As utilizing different dielectrics demonstrated similar effects in the space plasma environment.The test result also demonstrated that the surface charging and discharging would not influence the normal functionality of SADA with proper design.The test result will serve as a good foundation for the design of future space mechanisms like SADA for higher reliability and safety.
出处
《空间科学学报》
CAS
CSCD
北大核心
2014年第3期360-366,共7页
Chinese Journal of Space Science
关键词
太阳帆板驱动机构
表面充放电
试验研究
Solar Array Drive Assembly
Surface Charging and Discharging
Experimental study
