摘要
在讨论铝钪合金各种生产方法的基础上 ,研究了熔盐电解法生产Al Sc合金的工艺条件·结果发现 ,随着电流密度的增加 ,合金中钪的质量分数逐渐增加 ,最高可达 1 5 % ;但随分子比的升高 ,Sc的质量分数却有所下降·当通过的电流一定时 ,随着电解过程的延长 。
On the base of a discussion in all kinds of production methods of Al-Sc alloy, the molten salt electrolysis method was used to produce Al-Sc alloy directively. It is found that as the current density increasing, the concentration of Sc in alloy increases gradually. The maximal concentration of Sc can be 1 5%. But as the MR is increased, the concentration of Sc decreases significantly. When the transited current arrives at a certain extent, cell voltage and back EMF will be increased gradually with increasing eletrolysis process time.
出处
《东北大学学报（自然科学版）》
EI
CAS
CSCD
北大核心
2003年第4期358-360,共3页
Journal of Northeastern University(Natural Science)
基金
国家高技术研究发展计划项目 (2 0 0 1AA3 3 5 0 10 )
关键词
熔盐电解
铝-钪合金
钪
反电动势
冰晶石
molten salt electrolysis
Al-Sc alloy
scandium
back EMF
cryolite
