摘要
方舱为目前国际军队保障车辆中广泛应用的先进装备,要求重量轻、整体强度高、保温、密封等。设计采用铝合金方管焊接形成骨架,铝合金板作为内外蒙皮,蒙皮间填充聚氨酯泡沫板的夹层结构,各壁板间采用铆接及粘接的方法连接。试验确定了粘接剂的固化工艺及生产工艺流程,设计了工装、试验台等,形成了规模生产能力。质量检测及使用表明,大板方舱的整体强度及各项使用性能均满足要求。
The flat square cabin is an advanced equipment used widely in international military safeguard vehicles, with high requests in design, arts and crafts, manufacture etc. Aiming at the cabin's request of light weight, high strength, heat preservation and airproof,aluminum alloy square tube is welded to form framework,aluminum alloy plate is used as sheath,polyester bubble plate is filled between sheath as sandwich, and the boards are connected with each other by rivet and bond joint. Then the process parameter and technological process of the bonder solidification process are determined by experiment, the tool setup and testbed are designed and mass productive capacity is realized. The quality test and application show that the whole strength and service performance of the big board square cabin all meet the requests.
出处
《山东冶金》
CAS
2003年第4期50-52,共3页
Shandong Metallurgy
