期刊文献+

轻量化复合材料桁架桥承载性能试验研究 被引量:3

Experimental Study on Bearing Capacity of Lightweight Composite Truss Bridge
原文传递
导出
摘要 轻量化复合材料桁架桥是以碳/玻混杂纤维增强复合材料(FRP)与铝合金为原材料的,为武警部队研发、通行重型荷载的应急桥装备。为了验证桥梁的承载性能,对30 m跨轻量化复合材料桁架桥进行了静载与动载试验。结果表明:轻量化后的应急桥在静动载作用下,结构处于线弹性状态,杆件应力与桥梁变形均小于设计允许值,桥梁性能良好,达到了工程应用的设计要求。 The lightweight composite material(FRP) truss bridge is an emergency bridge equipment developed for the armed police force and used for heavy load.In order to verify the bearing capacity of the bridge,static and dynamic load tests were carried out on the 30 m span lightweight composite material truss bridge.The results show that the lightweight emergency bridge under static and dynamic loads is in a linear elastic state.The stress and deformation of the members are less than the allowable value of the design.The performance of the bridge is good and meets the design requirements of the engineering application.
作者 潘大荣 赵栋 卢康 张宏建 赵启林 曾智刚 陈立 刘建安 Pan Darong;Zhao Dong;Lu Kang;Zhang Hongjian;Zhao Qilin;Zeng Zhigang;Chen Li;Liu Jian’an(Nanjing Institute of Engineering,Nanjing 211167,China;Institute of Engineering Design,Academy of Armed Police Forces,Beijing 100000,China;Emergency Early Warning and Rescue Equipment Co.,Ltd.,China Harzone Industry Co.Ltd.,Wuhan 430223,China;College of Mechanical and Power Engineering,Nanjing University of Technology,Nanjing 211816,China)
出处 《塑料科技》 CAS 北大核心 2019年第3期122-126,共5页 Plastics Science and Technology
基金 武警部队研究院科研项目<复合材料轻量化应急桥的研制>(20171096)
关键词 轻量化 纤维增强复合材料 桁架桥 静动载实验 Lightweight FRP Truss bridge Static and dynamic load experiment
  • 相关文献

参考文献2

二级参考文献19

  • 1郑志才,葛林海,陈艳,孙士祥,王强.玄武岩纤维增强树脂基复合材料力学性能研究[J].航空制造技术,2011,0(17):66-68. 被引量:12
  • 2倪章军,李建中,范立础.FRP组合桥面系统在桥梁工程中的应用与发展[J].玻璃钢/复合材料,2004(1):42-47. 被引量:15
  • 3邵劲松,刘伟庆,蒋桐.民用工业中复合材料桁架的应用和发展[J].玻璃钢/复合材料,2006(5):35-39. 被引量:15
  • 4Hurez A, Akkus N, Verchery G, Kawahara M. Design and analysis of composite structures with interlaced fibers [ J ]. Composites,2001, 32A (10): 1455-1463.
  • 5Nikos Pantelelis. European Virtual Engineering Network [R]. NT-UA, 2003.
  • 6Gerard Van Erp. Fiber composite truss [A]. Fiber Composites Design and Development [C]. Queensland: USQ, 2001. 30-40.
  • 7Tim Heldt, Gerard Van Erp, Craig Cattell. Fiber composites in infrastructure-applications and issues [A]. Fiber Composites Design and Development [C]. Queensland: USQ, 2001. 50-60.
  • 8Mohamed Abdelmoaty Khalaf. Behavior of Pultruded Glass Fiber Reinforced Plastic I-beams under Monotonic and Cyclic Patch Loads [D]. Washington: Drexel University, 2001.
  • 9Koorosh Guidanean, David Lichodziejewski. An Inflatable Rigidizable Truss Structure Based on New Sub-Tg Polyurethane Composites. American [R]. AIAA-02-1593, NewYork: AIAA, 2002.
  • 10SUN Xiu-dong, et al. Mold Filling Analysis in Vacuum-Assisted Resin Transfer Moldlng [J]. Polymer Composites, 1998, 19 (6) :10-20.

共引文献23

同被引文献26

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部