期刊文献+

Spark Plasma Sintering Properties of Ultrafine Ti(C,N)-based Cermet 被引量:2

Spark Plasma Sintering Properties of Ultrafine Ti(C,N)-based Cermet
下载PDF
导出
摘要 Ultrafine Ti(C,N)-based cermet was sintered by SPS from 1050℃ to 1450℃ and its sintering properties,such as porosity,mechanical properties and phase transformation,were investigated by optical microscopy (OM),scanning electron microscopy (SEM),X-ray diffraction (XRD),and differential scanning calorimeter (DSC).It is found that the spark plasma sintering properties of Ti(C,N)-based cermet differ from those of conventional vacuum sintering.The liquid phase appearance is at least lower by 150℃ than that in vacuum sintering.The porosity decreases sharply below 1 200℃ and reaches minimum at 1 200℃,and afterwards it almost keeps invariable and no longer increases.SPS remarkably accelerates the phase transformation of Ti(C,N)-based cermet and it has a powerful ability to remove oxides in Ti(C,N)-based cermets.Above 1 350℃,denitrification occurred.Fresh graphite phase formed above 1 430℃.Both the porosity and graphite are responsible for the poor TRS. Ultrafine Ti(C,N)-based cermet was sintered by SPS from 1050℃ to 1450℃ and its sintering properties,such as porosity,mechanical properties and phase transformation,were investigated by optical microscopy (OM),scanning electron microscopy (SEM),X-ray diffraction (XRD),and differential scanning calorimeter (DSC).It is found that the spark plasma sintering properties of Ti(C,N)-based cermet differ from those of conventional vacuum sintering.The liquid phase appearance is at least lower by 150℃ than that in vacuum sintering.The porosity decreases sharply below 1 200℃ and reaches minimum at 1 200℃,and afterwards it almost keeps invariable and no longer increases.SPS remarkably accelerates the phase transformation of Ti(C,N)-based cermet and it has a powerful ability to remove oxides in Ti(C,N)-based cermets.Above 1 350℃,denitrification occurred.Fresh graphite phase formed above 1 430℃.Both the porosity and graphite are responsible for the poor TRS.
作者 丰平
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2004年第1期69-72,共4页 武汉理工大学学报(材料科学英文版)
基金 FundedbytheNationalNaturalScienceFoundationofChi na (No .5 0 0 74 0 17)andStateKeyLaboratoryofAdvancedTechnol ogyforMaterialsSynthesisandProcessingofWuhanUniversityofTechnology
关键词 Ti(C N)-based cermets ultrafine cermet spark plasma sintering (SPS) SINTERABILITY densification deoxidation denitrification Ti(C,N)-based cermets ultrafine cermet spark plasma sintering (SPS) sinterability densification deoxidation denitrification
  • 相关文献

参考文献1

二级参考文献1

  • 1T. Nishimura,M. Mitomo,H. Hirotsuru,M. Kawahara. Fabrication of silicon nitride nano-ceramics by spark plasma sintering[J] 1995,Journal of Materials Science Letters(15):1046~1047

共引文献117

同被引文献18

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部