期刊文献+

半固态铝合金设计与试验研究 被引量:22

Design and Experimental Investigations of Semisolid Aluminum Alloys
下载PDF
导出
摘要 在半固态加工的基本原理基础上采用合金热力学计算方法设计了Al Si Mg系半固态新合金 ,并进行了初步的试验验证。结果表明 ,新合金在铸态和半固态下的组织和力学性能特点与预测结果基本一致 ,并且发现适当增加Mg ,Si含量可以改善铝合金半固态加工性能和提高合金的力学性能。这对进一步开发新型的实用半固态合金具有一定的指导作用。 The development of semi-solid metal (SSM) processing was limited by using conventional cast aluminium alloys. Therefore one of the main researches for SSM processing is to design special alloys for SSM processing in order to realize its full potential. In this paper, the new SSM alloys of Al-Si-Mg ternary system were designed and optimized by thermodynamic calculations with the consideration of basic principle of SSM processing, and tested. The result shows that microstructures and properties of the new alloys both in as-cast and semisolid states are quite correspond with the results of thermodynamic calculations. It is found that the processing properties of semisolid alloys can be improved as the Mg and Si contents are increased properly.
出处 《稀有金属》 EI CAS CSCD 北大核心 2004年第2期358-361,共4页 Chinese Journal of Rare Metals
基金 国家高技术研究发展计划 (863计划 )资助项目 (2 0 0 2AA3 3 60 80 )
关键词 合金设计 半固态金属 铝合金 alloy design semisolid metals aluminum alloys
  • 相关文献

参考文献12

  • 1Chiarmetta G.Thixoformong of automobile components [A].In:Kirkwood D H, Kapranos P ed.Proceedings of the 4th International Conference on Semi-Solid Processing of Alloys and Composites [C].Sheffield, England, 1996.204.
  • 2Stephen P Midson.The commercial status of semi-solid casting in the USA [A].In:Kirkwood D H, Kapranos P ed.Proceedings of the 4th International Conference on Semi-Solid Processing of Alloys and Composites [C].Sheffield, England, 1996.251.
  • 3Nicholas N H, et al.Application of semi-solid metal forming to the production of small components [A].In:Bhasin A Kumar, Moore John J, et al, ed.Proceedings of the 5th International Conference on Semi-Solid Processing of Alloys and Composites [C].Golden,
  • 4Fan Z.Semisolid metal processing [J].Int.Mater.Rev., 2002, 47(2):49.
  • 5Hirt G, In:Chiarmetta G L.The thixotec research project [A].In:M.Rosso ed.Proceedings of the 6th International Conference on Semi-Solid Processing of Alloys and Composites [C].Turin, Italy, 2000.55.
  • 6Atkinson H V, Kapranos P, Kirkwood D H.Alloy development for thixoforming [A].In:Chiarmetta G L, Rosso M, ed.Proceedings of the 6th International Conference on Semi-Solid Processing of Alloys and Composites [C].Turin, Italy, 2000.443.
  • 7Kraly A.Development and industrial production of thixalloy [A].In:G.L.Chiarmetta, M.Rosso ed.Proceedings of the 6th International Conference on Semi-Solid Processing of Alloys and Composites [C].Turin, Italy, 2000.495.
  • 8Atkinson H V.Development of high performance aluminum alloys for thixoforming [A].In:Tsutsui Y, et al.ed.Proceedings of the 7th International Conference on Advanced Semi-Solid Processing of Alloys and Composites [C].Tsukuba, Japan, 2002.51.
  • 9Liu Y Q, Fan Z, Patel J.thermodynamic approach to aluminum alloy design for semisolid metal processing [A].In:Tsutsui Y, et al.ed.Proceedings of the 7th International Conference on Advanced Semi-Solid Processing of Alloys and Composites [C].Tsukuba, Japan
  • 10孙国强.半固态加工技术及其应用[J].稀有金属,2003,27(3):382-384. 被引量:17

二级参考文献11

共引文献39

同被引文献195

引证文献22

二级引证文献121

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部