期刊文献+

影响喷雾造粒Al_2O_3/nano-TiO_2复合陶瓷粉体流动特性的流变学因素研究 被引量:11

Influence of Rheological Factors of Al_2O_3/nano-TiO_2 Slurry on Flow Power of Powders Prepared by Spray Prilling
下载PDF
导出
摘要 本文研究了分散剂、粘结剂及固相含量等流变学因素对喷雾造粒粉体流动性的影响。结果表明 ,Al2 O3 3wt.%nano TiO2 浆料具有剪切变稀的特性 ,有利于复合陶瓷粉体的喷雾造粒。当固相含量为浆料总质量的6 0 % ,分散剂和粘结剂分别为固相质量的 0 3%和 1 0 %时 ,浆料具有合适的粘度和最佳的分散稳定性 ,喷雾造粒所得到的粉体形状为球形或近球形 ,具有较高的松装密度和良好的流动性 ,满足用于热喷涂的需要。 The rheological factors of aqueous Al -2O -3/3wt.% nano-TiO -2 slurries on the flow power of Al -2O -3/3wt.% nano-TiO -2 powder prepared by spray prilling were investigated in consideration of dispersant content,binder content and solid loading.The results indicated that all the slurries exhibited shear-thinning behaviors,which is beneficial to the spray prilling process for the composite ceramic powders.When solid loadings is 60wt.% of total mass,the A15 dispersant and binder content was 0 ^3wt.% and 1 ^0wt.% of solid loadings respectively,the slurry had low viscosity and good dispersity and stability.Powders prepared by spray prilling using optimized slurry have good spherical shape and little size distribution so as to have good flow power and high loose packed density.The composite powders by spray prilling can be applied for thermal spraying process on account of good fluidity.
出处 《材料科学与工程学报》 CAS CSCD 北大核心 2004年第3期318-322,共5页 Journal of Materials Science and Engineering
基金 国家 973项目资助(编号 :G1 9990 6490 0 4)
关键词 陶瓷粉体 流变学 喷雾造粒 流动性 AL2O3 氧化铝 纳米氧化钛 NANO-TIO2 ceramic powder rheology spray prilling flow power
  • 相关文献

参考文献12

  • 1E.H.Jordan,M.Gell,Y.H.Sohn,D.Goberman,et al.Fabrication and evaluation of plasma sprayed nanostructured alumina-titania coatings with superior properties[J].Materials Science and Engineering A 2001,301:80~89.
  • 2Jianghong He,Julie M.Schoemung.A review on nanostructrured WC-Co coatings[J].Surface and Coating Technology,2002,157:72~79.
  • 3Maurice Gell.Application opportunities for nanostructructured materials and coatings[J].Materials Science Engineering A,1995,204:246~251.
  • 4Shmuel Eideiman,Xiaolong Yang.Three Dimensional simulation of HVOF spray deposition of nanoscale materials[J].Nano Structured Materials,1997,9:79~84.
  • 5R.S.Lima,A.Kucuk,C.C.Berndt.Evaluation of microhardness and elastic modulus of thermally sprayed nanostructured zirconia coatings[J].Surface and Coating Technology,2001,135:166~172.
  • 6D.Goberman,Y.H.Sohn,L.Shaw,et al.Microstructure development of Al2O3-13wt.% TiO2 plasma sprayed coatings derived from nanocrystalline powders[J].Acta Materialla,2002,50:1141~1152.
  • 7Jiang Xian-liang,Liu Min.D.C.Plasma-sprayed coatings of nanostrutured alumina-titania-silica[J].Plasma Science and Technology,2002,4:1481~1484.
  • 8陈煌,林新华,曾毅,丁传贤.热喷涂纳米陶瓷涂层研究进展[J].硅酸盐学报,2002,30(2):235-239. 被引量:60
  • 9H.Liang,K.Shinohara,H.Minoshima,K.Matsushima,Analysis of constant rate period of spray drying of slurry[J].Chemical Engineering Science,2001,56:2205~2213.
  • 10W.R.Cannon,R.Becker,K.R.Mikeska,Interations among organic additives used for tape casting.In:M.F.Yan,K.Niwa,H.M.O′Bryan,W.S.Young(Eds),Advances in Ceramics.Ceramic Substrate and Packages for Electronic Applications[J].American Ceramic Society,Westerville,1989,26:525~541.

二级参考文献11

共引文献166

同被引文献165

引证文献11

二级引证文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部