Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF (Medium Density Fiberboard) and Steel

Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF (Medium Density Fiberboard) and Steel

下载PDF

导出

摘要 We implemented the process of producing a new Rib in three different ways, and we selected the process that was the most affordable and required the least labor, and we did it. This paper also considers the influence of the cost of the form from MDF, Alumina and Steel on the quality of the product. We implemented the process of producing a new Rib in three different ways, and we selected the process that was the most affordable and required the least labor, and we did it. This paper also considers the influence of the cost of the form from MDF, Alumina and Steel on the quality of the product.

作者 Azizov Shuhrat Mamatovich Uzoqov Farxodjon Shermuhammad Alijonov Hasanov Ahmadjon Mirzakarimov Mirsharofiddin Azizov Shuhrat Mamatovich;Uzoqov Farxodjon;Shermuhammad Alijonov;Hasanov Ahmadjon;Mirzakarimov Mirsharofiddin(Department of Technological Machines and Equipment, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan)

机构地区 Department of Technological Machines and Equipment

出处《Engineering（科研）》 CAS 2022年第8期320-328,共9页 工程（英文）（1947-3931）

关键词 Mold Rib ALUMINUM MDF (Medium Density Fibreboard) and Steel Materials Production Quality Mold Rib Aluminum MDF (Medium Density Fibreboard) and Steel Materials Production Quality

分类号 S78 [农业科学—林学]

引文网络
相关文献

参考文献10

1Guang-hua Wang,Yan-xiang Li.Development of new ductile iron with super-high thermal conductivity and elongation[J].Journal of Iron and Steel Research International,2022,29(3):462-473. 被引量：1
2Mohamed K. Hassan.Characterization of Face Sheet/Core Debonding Strength in Sandwiched Medium Density Fiberboard[J].Materials Sciences and Applications,2017,8(9):673-684. 被引量：1
3Azizov Shuhrat Mamatovich,Karimov Abdusamat,Peter Arras.The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw[J].World Journal of Mechanics,2013,3(1):58-61. 被引量：5
4Shuhrat Mamatovich Azizov.Calculation Energy of Efficiency New Ginning Machine[J].Engineering（科研）,2022,14(4):163-172. 被引量：2
5Azizov Shuhrat Mamatovich,Karimov Abdusamat.Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling[J].World Journal of Mechanics,2011,1(3):122-126. 被引量：5
6Juan Jose Mejia Briseno,Francisco Casanova-del-Angel.Fracture Mechanics on Aluminum Specimens[J].World Journal of Mechanics,2021,11(12):237-257. 被引量：1
7Dong-bin Jiang,Li-feng Zhang,Ya-dong Wang.Effect of mold electromagnetic stirring on solidification structure and solute segregation in continuous casting bloom[J].Journal of Iron and Steel Research International,2022,29(1):124-131. 被引量：3
8Shuhrat Mamamtovich Azizov,Hamid Tursunovich Axmedhodjaev.Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources[J].World Journal of Engineering and Technology,2015,3(3):91-99. 被引量：2
9Ya-dong Wang,Li-feng Zhang,Wen Yang,Ying Ren.Effect of nozzle type on fluid flow, solidification, and solute transport in mold with mold electromagnetic stirring[J].Journal of Iron and Steel Research International,2022,29(2):237-246. 被引量：6
10Bo Ning,Hui-bin Wu,Gang Niu,Xin-pan Yu.Cold compression deformation method for reducing residual stress and uniformizing micro-property in ferrite steel[J].Journal of Iron and Steel Research International,2022,29(3):503-511. 被引量：1

二级参考文献5

1Yu Xu,En-gang Wang,Zhuang Li,An-yuan Deng.Effects of vertical electromagnetic stirring on grain refinement and macrosegregation control of bearing steel billet in continuous casting[J].Journal of Iron and Steel Research International,2017,24(5):483-489. 被引量：10
2焦书军,S.Yue.平整轧制的X80管线钢残余应力与中子衍射测量[J].钢铁,2004,39(3):61-66. 被引量：3
3Siqi Chen,Hongkai Chen,Ming Yang,Tao Chen,Kexuan Guo.Analysis on Fracture Mechanics of Unstable Rock[J].World Journal of Engineering and Technology,2016,4(3):69-75. 被引量：2
4Azizov Shuhrat Mamatovich,Karimov Abdusamat.Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling[J].World Journal of Mechanics,2011,1(3):122-126. 被引量：5
5Azizov Shuhrat Mamatovich,Karimov Abdusamat,Peter Arras.The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw[J].World Journal of Mechanics,2013,3(1):58-61. 被引量：5

共引文献9

1周伟基,姚玉东,刘佳伟,岳峰,张磊.Φ800 mm圆坯Q355NE凝固传热数值模拟和工艺实践[J].特殊钢,2023,44(2):7-11. 被引量：3
2周伟基,姚玉东,刘佳伟,岳峰,史建凯.结晶器电磁搅拌对Q355NE Φ800 mm圆坯凝固组织及偏析的影响[J].特殊钢,2023,44(3):64-68.
3李跃,王子铭,孙本辰,岳强.电磁冶金对凝固组织特性影响的研究进展[J].材料热处理学报,2023,44(12):16-34.
4李小明,王阳,朱佳雨,杨永坤,王建立,王伟安.水口位置对小方坯结晶器内流场和凝固的影响[J].钢铁,2024,59(1):75-90. 被引量：3
5杨文,王乐瑶,刘金刚,袁天祥,张立峰,杨光,李阳,闫占辉.拉速对MCCR工艺生产低碳铝镇静钢轧板中夹杂物的影响[J].钢铁,2024,59(8):50-57.
6Shuhrat Mamatovich Azizov.Calculation Energy of Efficiency New Ginning Machine[J].Engineering（科研）,2022,14(4):163-172. 被引量：2
7Azizov Shuhrat Mamatovich,Uzoqov Farxodjon,Shermuhammad Alijonov,Hasanov Ahmadjon,Mirzakarimov Mirsharofiddin.Statically Analysis of the Stress State of Saw Gins Consisting of 90, 100, 110, 120, 130 Saws[J].Engineering（科研）,2022,14(8):329-338.
8Shuhrat Mamamtovich Azizov,Hamid Tursunovich Axmedhodjaev.Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources[J].World Journal of Engineering and Technology,2015,3(3):91-99. 被引量：2
9Muradov Rustam Muradovich,Karimov Abdusamat Ismonovich,Mardanov Botir Mardanovich.Theoretical and Experimental Studies of the Effect of Inclined Scraper on Removal of Raw Cotton from Mesh Surface[J].World Journal of Mechanics,2014,4(12):371-377. 被引量：3

1张和据.2021版《中密度纤维板》国家标准解读[J].中国人造板,2022,29(5):25-28.
2Shahril Anuar Bahari,Mohd Nazarudin Zakaria,Syaiful Osman,Falah Abu,Mohamad Jani Saad,Reza Hosseinpourpia.Strength Performance and Microstructure Characteristic of Naturally-Bonded Fiberboard Composite from Malaysian Bamboo(Bambusa vulgaris)[J].Journal of Renewable Materials,2022,10(10):2581-2591.
3Ma Qunming,Zhou Lei,Chen Rui,Chen Jingjing,Hua Xin,Zhu Qingli,Yang Jia.Results and Analysis on Proficiency Testing and Measurement Audit for Molds and Yeast in Cosmetics[J].China Detergent & Cosmetics,2022,7(2):49-53.
4Zawawi Ibrahim,Mansur Ahmad,Astimar Abdul Aziz,Ridzuan Ramli,Mohd Ariff Jamaludin,Suhaimi Muhammed,Aisyah Humaira Alias.Dimensional Stability Properties of Medium Density Fibreboard (MDF) from Treated Oil Palm (Elaeis guineensis) Empty Fruit Bunches (EFB) Fibres[J].Open Journal of Composite Materials,2016,6(4):91-99. 被引量：1
5专利文摘[J].橡塑技术与装备,2022,48(8):75-78.
6Shao-jie Lv,Shui-ze Wang,Gui-lin Wu,Jun-heng Gao,Xu-sheng Yang,Hong-hui Wu,Xin-ping Mao.Application of phase-field modeling in solid-state phase transformation of steels[J].Journal of Iron and Steel Research International,2022,29(6):867-880. 被引量：1
7Jiayidaer Baolati,Kaiyuan Li,Yanyan Zou,Kevin Frank,George Hare,Jiaqing Zhang,Fanliang Ge.Large eddy simulation of room fire spread using a medium scale compartment made of medium density fibreboard (MDF) panels[J].Building Simulation,2022,15(4):495-510. 被引量：1
8Biqing Shu,Qin Ren,Lu Hong,Zhongping Xiao,Xiaoning Lu,Wenya Wang,Junbao Yu,Naiqiang Fu,Yiming Gu,Jinjun Zheng.Effect of Steam Explosion Technology Main Parameters on Moso Bamboo and Poplar Fiber[J].Journal of Renewable Materials,2021,9(3):585-597. 被引量：2
9ZHAO HeRan,CHEN MingXiang,PENG Yang,WANG Qing,KANG Min,CAO LiHua.TXV Technology:The cornerstone of 3D system-in-packaging[J].Science China(Technological Sciences),2022,65(9):2031-2050. 被引量：3
10Aina Rasheed,Buliaminu Kareem.Development of an Adjustable Bed for a Micro-Turbine Electric Power Generator Plant[J].Journal of Power and Energy Engineering,2022,10(5):65-76.

Engineering（科研）

2022年第8期

浏览历史

内容加载中请稍等...

Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF (Medium Density Fiberboard) and Steel

参考文献10

二级参考文献5

共引文献9

相关作者

相关机构

相关主题

浏览历史