Phase decomposition kinetics and the corresponding mechanical properties of the severe cold-rolled(SCRed) carbon-doped(1.3 at.%) equimolar FeCoCrNiMn high-entropy alloy(HEA) after being annealed at 500 ℃ were investi...Phase decomposition kinetics and the corresponding mechanical properties of the severe cold-rolled(SCRed) carbon-doped(1.3 at.%) equimolar FeCoCrNiMn high-entropy alloy(HEA) after being annealed at 500 ℃ were investigated. This single face-centered cubic(FCC) solid-solution HEA decomposed to M23 C6+L10, B2, and σ in chronological order. The formation kinetics of the L10, B2, and σ phases followed the Johnson-Mehl-AvramiKolmogorov(JMAK) equation. The yield strength of the HEA was 1520 MPa and increased to 1920 MPa after being annealed at 500 ℃ for 1 h, as a result of the formation of nanosized M23 C6 and L10. Both strength and ductility decreased after 2 d of annealing due to the increase of volume fractions and the coarsening of the M23C6 and L10 precipitates. From 4 to 32 d, the hardness was found to increase, which is ascribed to the rapid formation of the B2 and σ phases. From 32 to 64 d, the hardness increased further to finally reach about HV 760, with the FCC matrix almost exhausted to form the M23 C6, L10, B2, and σ phases. The results of this work may serve as a guide for the heat-treatment of carbon-doped HEAs.展开更多
基金Project(51901134)supported by the National Natural Science Foundation of ChinaProject(SJTU.18X100040023)supported by the Program of Scientific Research Ability Cultivation for Young Researchers,China。
文摘Phase decomposition kinetics and the corresponding mechanical properties of the severe cold-rolled(SCRed) carbon-doped(1.3 at.%) equimolar FeCoCrNiMn high-entropy alloy(HEA) after being annealed at 500 ℃ were investigated. This single face-centered cubic(FCC) solid-solution HEA decomposed to M23 C6+L10, B2, and σ in chronological order. The formation kinetics of the L10, B2, and σ phases followed the Johnson-Mehl-AvramiKolmogorov(JMAK) equation. The yield strength of the HEA was 1520 MPa and increased to 1920 MPa after being annealed at 500 ℃ for 1 h, as a result of the formation of nanosized M23 C6 and L10. Both strength and ductility decreased after 2 d of annealing due to the increase of volume fractions and the coarsening of the M23C6 and L10 precipitates. From 4 to 32 d, the hardness was found to increase, which is ascribed to the rapid formation of the B2 and σ phases. From 32 to 64 d, the hardness increased further to finally reach about HV 760, with the FCC matrix almost exhausted to form the M23 C6, L10, B2, and σ phases. The results of this work may serve as a guide for the heat-treatment of carbon-doped HEAs.
