A stable, single-longitudinal-mode, nanosecond-pulsed Nd:YAG laser with a laser-diode dual-end pumping arrangement is constructed. Injection seeding is performed successfully by utilizing a Rb Ti OPO4 crystal as the i...A stable, single-longitudinal-mode, nanosecond-pulsed Nd:YAG laser with a laser-diode dual-end pumping arrangement is constructed. Injection seeding is performed successfully by utilizing a Rb Ti OPO4 crystal as the intracavity phase modulator to change the optical length of the slave cavity based on the delay-ramp-fire technique. The laser generates 9.9 m J of pulse energy with a 16 ns pulse duration at a 400 Hz repetition rate.A near-diffraction-limit laser beam is achieved with a beam quality factor M2 of approximately 1.2. The frequency jitter is 1.5 MHz over 2 min, and the fluctuation of the output pulse power is 0.3% over 23 min.展开更多
In a two-stage optical parametric amplifier based on KTiOAO4 crystals, we apply beam-overlapping technique to nanosecond signal pulse amplification, which results in high conversion efficiency and good beam quality. A...In a two-stage optical parametric amplifier based on KTiOAO4 crystals, we apply beam-overlapping technique to nanosecond signal pulse amplification, which results in high conversion efficiency and good beam quality. A signal pulse energy of 66 mJ at 1.572 μm wavelength is generated with 220 mJ of pump pulse input. A maximum gain of 66 and a maximum pump depletion of as high as 44% are determined. The spectral linewidth of the amplified signal pulse is around 50 MHz, and the beam quality factor of M2 is less than 2.3.展开更多
基金partly supported by the Natural Science Foundation of Shanghai under Grant No.12ZR1435100
文摘A stable, single-longitudinal-mode, nanosecond-pulsed Nd:YAG laser with a laser-diode dual-end pumping arrangement is constructed. Injection seeding is performed successfully by utilizing a Rb Ti OPO4 crystal as the intracavity phase modulator to change the optical length of the slave cavity based on the delay-ramp-fire technique. The laser generates 9.9 m J of pulse energy with a 16 ns pulse duration at a 400 Hz repetition rate.A near-diffraction-limit laser beam is achieved with a beam quality factor M2 of approximately 1.2. The frequency jitter is 1.5 MHz over 2 min, and the fluctuation of the output pulse power is 0.3% over 23 min.
文摘In a two-stage optical parametric amplifier based on KTiOAO4 crystals, we apply beam-overlapping technique to nanosecond signal pulse amplification, which results in high conversion efficiency and good beam quality. A signal pulse energy of 66 mJ at 1.572 μm wavelength is generated with 220 mJ of pump pulse input. A maximum gain of 66 and a maximum pump depletion of as high as 44% are determined. The spectral linewidth of the amplified signal pulse is around 50 MHz, and the beam quality factor of M2 is less than 2.3.
