本文根据相干斑噪声的时间快变特征和非海浪纹理现象的时间缓变特征,基于交叉谱提出了一种对相干斑噪声和大尺度非海浪纹理的抑制的方法,进而结合SAR图像谱和海浪谱之间的准线性映射关系,基于SAR数据对海浪参数进行了反演。在反演过程中...本文根据相干斑噪声的时间快变特征和非海浪纹理现象的时间缓变特征,基于交叉谱提出了一种对相干斑噪声和大尺度非海浪纹理的抑制的方法,进而结合SAR图像谱和海浪谱之间的准线性映射关系,基于SAR数据对海浪参数进行了反演。在反演过程中,首先仿真分析了不同海况下准线性近似法的海浪反演能力,结果表明:风浪引起的方位向截断效应会显著影响反演精度,因此该方法在低风速时的涌浪反演精度更高。通过将基于Sentinel-1卫星2020年的波模式SAR数据的反演结果与欧洲中期天气预报中心(European Centre for Medium-Range Weather Forecasts,ECMWF)提供的再分析数据进行对比,发现高海况海浪有效波高反演结果明显偏低,而且该反演误差与风速、方位向截断波长之间存在显著相关性。为了提高有效波高的反演精度,本文进一步给出了海浪有效波高反演误差与风速、方位向截断波长之间的经验校正函数模型,结果显示,通过该模型修正后的海浪有效波高反演结果与ECMWF数据和浮标测量数据具有良好一致性。展开更多
A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micr...A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micro-mechanical deformation behavior during the wire drawing process was investigated.Results indicate that the internal deformation and slip of the drawn wire are unevenly distributed,forming distinct slip and non-slip zones.Additionally,horizontal strain concentration bands develop within the drawn wire.As the wire diameter compression ratio increases,the strength of the slip systems and the extent of slip zones inside the deformation zone also increase.However,the fluctuating stress state,induced by contact pressure and frictional stress,results in a rough and uneven wire surface and diminishes the stability of the drawing process.展开更多
文摘本文根据相干斑噪声的时间快变特征和非海浪纹理现象的时间缓变特征,基于交叉谱提出了一种对相干斑噪声和大尺度非海浪纹理的抑制的方法,进而结合SAR图像谱和海浪谱之间的准线性映射关系,基于SAR数据对海浪参数进行了反演。在反演过程中,首先仿真分析了不同海况下准线性近似法的海浪反演能力,结果表明:风浪引起的方位向截断效应会显著影响反演精度,因此该方法在低风速时的涌浪反演精度更高。通过将基于Sentinel-1卫星2020年的波模式SAR数据的反演结果与欧洲中期天气预报中心(European Centre for Medium-Range Weather Forecasts,ECMWF)提供的再分析数据进行对比,发现高海况海浪有效波高反演结果明显偏低,而且该反演误差与风速、方位向截断波长之间存在显著相关性。为了提高有效波高的反演精度,本文进一步给出了海浪有效波高反演误差与风速、方位向截断波长之间的经验校正函数模型,结果显示,通过该模型修正后的海浪有效波高反演结果与ECMWF数据和浮标测量数据具有良好一致性。
基金the National Natural Science Foundation of China(Nos.U21A2051,52173297,52071133)the R&D Projects of Henan Academy of Sciences of China(No.220910009)+2 种基金the Key R&D and Promotion Projects of Henan Province of China(No.212102210441)the Joint Fund of Henan Science and Technology R&D Plan of China(No.222103810037)the Zhongyuan Scholar Workstation Funded Project of China(No.214400510028).
文摘A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micro-mechanical deformation behavior during the wire drawing process was investigated.Results indicate that the internal deformation and slip of the drawn wire are unevenly distributed,forming distinct slip and non-slip zones.Additionally,horizontal strain concentration bands develop within the drawn wire.As the wire diameter compression ratio increases,the strength of the slip systems and the extent of slip zones inside the deformation zone also increase.However,the fluctuating stress state,induced by contact pressure and frictional stress,results in a rough and uneven wire surface and diminishes the stability of the drawing process.
