期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
Temperature effect on nanotwinned Ni under nanoindentation using molecular dynamic simulation
1
作者 何茜 徐子翼 倪玉山 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第1期603-612,共10页
Temperature effect on atomic deformation of nanotwinned Ni (nt-Ni) under localized nanoindentation is investigated in comparison with nanocrystalline Ni (nc-Ni) through molecular simulation.The nt-Ni exhibits enhanced... Temperature effect on atomic deformation of nanotwinned Ni (nt-Ni) under localized nanoindentation is investigated in comparison with nanocrystalline Ni (nc-Ni) through molecular simulation.The nt-Ni exhibits enhanced critical load and hardness compared to nc-Ni,where perfect,stair-rod and Shockley dislocations are activated at (111),(111) and (111) slip planes in nt-Ni compared to only SSockley dislocation nucleation at (111) and (111) slip planes of nc-Ni.The nt-Ni exhibits a less significant indentation size effect in comparison with nc-Ni due to the dislocation slips hindrance of the twin boundary.The atomic deformation associated with the indentation size effect is investigated during dislocation transmission.Different from the decreasing partial slips parallel to the indenter surface in nc-Ni with increasing temperature,the temperaturedependent atomic deformation of nt-Ni is closely related to the twin boundary:from the partial slips parallel to the twin boundary (~10 K),to increased confined layer slips and decreased twin migration(300 K–600 K),to decreased confined layer slips and increased dislocation interaction of dislocation pinning and dissociation (900 K–1200 K).Dislocation density and atomic structure types through quantitative analysis are implemented to further reveal the above-mentioned dislocation motion and atomic structure alteration.Our study is helpful for understanding the temperature-dependent plasticity of twin boundary in nanotwinned materials. 展开更多
关键词 NANOINDENTATION twin boundary plastic deformation molecular dynamics simulation
原文传递
航空航天用高频高压正弦压力发生器的设计仿真 被引量:1
2
作者 张忠立 倪玉山 +5 位作者 张进明 王灿 任学弟 秦亭亭 刘贝贝 徐子翼 《上海航天》 CSCD 2019年第3期130-136,共7页
研制高频高压正弦压力发生器,测试航空航天用压力传感器在高频高压工况下的动态性能是确保发动机优化测试和控制系统有效的关键。为解决现有平面扫掠型正弦压力发生器存在频率和压力受限的问题,提出了一种径向活塞式正弦压力发生器的原... 研制高频高压正弦压力发生器,测试航空航天用压力传感器在高频高压工况下的动态性能是确保发动机优化测试和控制系统有效的关键。为解决现有平面扫掠型正弦压力发生器存在频率和压力受限的问题,提出了一种径向活塞式正弦压力发生器的原理及结构设计,并进一步基于任意拉格朗日欧拉法进行数值仿真,计算其正弦信号在不同压力和不同工作频率下的动静幅值比与失真度,以及优化压力传感器的安装位置。结果表明:设计的径向活塞式正弦压力发生器应确保0.2~8.0MPa的工作压力和200~10000Hz的正弦压力工作频率,正弦压力动静幅值比优于20%,可应用于航空发动机、汽轮机等领域的动态测试。 展开更多
关键词 正弦压力 动态测试 任意拉格朗日欧拉法 数值仿真
下载PDF
正弦压力信号数据处理方法研究
3
作者 徐子翼 张忠立 +1 位作者 王灿 倪玉山 《中国测试》 CAS 北大核心 2020年第9期19-25,46,共8页
针对现行规程中广泛应用的4种正弦压力信号处理方法,为比较三参数法和四参数法的优劣,使用Matlab模拟幅值缩放、相位时延和谐波失真3种情况下的理想信号,并计算其幅值、直流分量、相位和频率4个正弦参数。结果表明:在已知信号频率的情况... 针对现行规程中广泛应用的4种正弦压力信号处理方法,为比较三参数法和四参数法的优劣,使用Matlab模拟幅值缩放、相位时延和谐波失真3种情况下的理想信号,并计算其幅值、直流分量、相位和频率4个正弦参数。结果表明:在已知信号频率的情况下,三参数法优于四参数法,且不受谐波干扰。进一步绘制三维图像,分析频率估计误差对三参数法幅值灵敏度和相位差的影响,最终给出结论:三参数法的最大误差在频率估计误差较小时可用线性误差控制,频率估计百分比误差为2%时,幅值灵敏度和相位差的最大百分比误差约为–1.9%,可用于保守计算频率估计误差所带来的影响。 展开更多
关键词 计量学 正弦压力 误差分析 频率估计
下载PDF
基于动网格技术的正弦压力研究 被引量:2
4
作者 张忠立 徐子翼 +2 位作者 倪玉山 王灿 张进明 《计量学报》 CSCD 北大核心 2020年第1期67-72,共6页
正弦压力是一种典型的周期性动态压力标准信号,而正弦压力发生器正是产生正弦压力信号的关键。以转盘式正弦压力发生器为例,采用动网格技术、Reynolds-averaged Navier-Stokes方程和Spalart Allmaras湍流模型,对不同的压力发生腔尺寸和... 正弦压力是一种典型的周期性动态压力标准信号,而正弦压力发生器正是产生正弦压力信号的关键。以转盘式正弦压力发生器为例,采用动网格技术、Reynolds-averaged Navier-Stokes方程和Spalart Allmaras湍流模型,对不同的压力发生腔尺寸和工作频率进行三维瞬态流场的数值仿真。结果表明:工作频率不变时,正弦压力动静幅值比和谐波失真度随腔体宽度增大而减小,压力均值随腔体宽度增大而增大;腔体宽度不变时,正弦压力动静幅值比随工作频率增大而减小,压力均值随工作频率增大而增大,谐波失真度呈现先减小后增大的规律;通过动网格数值仿真技术,能有效实现正弦压力研究中各种模型结构的效果预测。 展开更多
关键词 计量学 正弦压力 动网格技术 谐波失真 数值仿真
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部