光电化学(PEC)分解水是一种清洁可持续的获取氢燃料的方法,其中产氧半反应(OER)是制约整个水分解过程效率的关键步骤.因此,光阳极的性能是决定太阳能到氢能转化效率的关键因素.在各种水氧化光阳极材料中,赤铁矿(α-Fe_(2)O_(3))因具有...光电化学(PEC)分解水是一种清洁可持续的获取氢燃料的方法,其中产氧半反应(OER)是制约整个水分解过程效率的关键步骤.因此,光阳极的性能是决定太阳能到氢能转化效率的关键因素.在各种水氧化光阳极材料中,赤铁矿(α-Fe_(2)O_(3))因具有良好的化学稳定性、合适的带隙(~2.1 eV)、无毒、储量丰富等优点而成为最有前途的光阳极材料之一.然而,α-Fe_(2)O_(3)丰富的受体表面态和缓慢的水氧化动力学导致光生电荷复合严重,限制了其在光电化学中的实际应用.因此,有必要对α-Fe_(2)O_(3)进行表面工程设计以提高水氧化效率.本文提出了一种新方法,以金属有机框架(Ti-MOFs)为模板,在Ti-Fe_(2)O_(3)表面煅烧合成TiO_(2)层,然后将富活性位点的ZIF-67加载在TiO_(2)/Ti-Fe_(2)O_(3)上作为助催化剂,制备出具有较好光电化学性能的ZIF-67/TiO_(2)/Ti-Fe_(2)O_(3)复合光阳极.X射线衍射、高分辨透射电镜、X射线光电子能谱和拉曼光谱等表征结果证实成功合成了ZIF-67/TiO_(2)/Ti-Fe_(2)O_(3).同时,氮气等温吸附脱附曲线和表面接触角测试结果表明,MOFs衍生的TiO_(2)为介孔材料.采用表面光伏技术、光致发光光谱、飞秒-瞬态吸收光谱和电化学阻抗谱分析,研究了光生电荷的分离和复合行为.结果表明,MOFs衍生的TiO_(2)不仅可以作为钝化层有效抑制了表面复合,还作为Ti-Fe_(2)O_(3)的电子阻挡层,显著减少了电子向表面的流失,从而大大提高了Ti-Fe_(2)O_(3)表面和体相的电荷分离效率.进一步的累积电荷量测试、电化学阻抗谱和Bode图分析显示,负载MOFs衍生TiO_(2)后,可以明显促进光生空穴向电解质的注入,其多孔结构也可以增加反应接触面积,这有利于光生电荷在固液界面传输.此外,理论计算结果表明,Ti-Fe_(2)O_(3)水氧化速控步骤的能垒(ΔG=3.38 eV)明显高于TiO_(2)(ΔG=1.67 eV),说明OER更容易在TiO_(2)/Ti-Fe_(2)O_(3)表面发生,这与其光电流密度结果一致.为进一步提高反应活性和加快水氧化动力学,负载助催化剂ZIF-67后,ZIF-67/TiO_(2)/Ti-Fe_(2)O_(3)复合光阳极实现了较好的光电化学性能,其在1.23 V vs.RHE时光电流密度高达4.04 mA cm^(‒2),是Ti-Fe_(2)O_(3)的9.3倍,并且复合光阳极的入射光子电流转换效率和空穴注入效率分别达到93%(390 nm)和91%.综上所述,本研究通过MOFs衍生的TiO_(2)和ZIF-67助催化剂改性α-Fe_(2)O_(3)光阳极,显著提升了其光电化学水氧化性能.其中,MOFs衍生TiO_(2)不仅优化了电荷分离,还促进了光生空穴的注入,从而显著提高其光电化学水氧化性能.本研究为构筑高性能的有机-无机杂化光阳极提供了新思路.展开更多
The photo-generated charge property of TiO 2 nanoparticles annealed at different temperatures was studied by the field induced surface photovoltage spectrum (FISPS) technique. The powder of TiO 2 was prepared and anne...The photo-generated charge property of TiO 2 nanoparticles annealed at different temperatures was studied by the field induced surface photovoltage spectrum (FISPS) technique. The powder of TiO 2 was prepared and annealed at 400, 600 and 800 ℃, respectively. The crystalline of TiO 2 transformed from anatase to rutile with the annealing temperature increasesing. And the photo-generated charges property of TiO 2 behaves differently after it was annealed at different temperatures. When the powder was annealed at 400 ℃, the particle size is so small that the energy band can not be formed completely, so the bound exciton state was formed when it was illuminated by the proper incident light, and it inverse antisymmetrically under external field for locatization effect. While, the powder was annealed at 600 ℃, the surface phtovoltaic response presents the characteristics of homojunction for different crystalline interfaces. After being annealed at 800 ℃, the energy band was formed completely and the larger particle size(36 nm) was got. Consequently, a band for the dissociation of free exciton emerged in the band edge of the surface photovotaic response distinguished from the band-band transition, and the direction of the photovoltaic response resulted from the free excition is consistent with the external field, that is positive under positive field, and it inverse symmetrically under external field.展开更多
The effect of built-in field on the surface photovoltage(SPV) response of ZnO nanoparticles was investigated by means of surface photovoltage spectroscopy(SPS). From the results of in situ SPS in atmosphere and in vac...The effect of built-in field on the surface photovoltage(SPV) response of ZnO nanoparticles was investigated by means of surface photovoltage spectroscopy(SPS). From the results of in situ SPS in atmosphere and in vacuum, we suggest that the built-in field should be a main condition for producing SPV response. By comparison of SPS with PL in vacuum as well as in atmosphere, we deduce that by changing the ambience of ZnO, its functional properties can be modulated.展开更多
文摘光电化学(PEC)分解水是一种清洁可持续的获取氢燃料的方法,其中产氧半反应(OER)是制约整个水分解过程效率的关键步骤.因此,光阳极的性能是决定太阳能到氢能转化效率的关键因素.在各种水氧化光阳极材料中,赤铁矿(α-Fe_(2)O_(3))因具有良好的化学稳定性、合适的带隙(~2.1 eV)、无毒、储量丰富等优点而成为最有前途的光阳极材料之一.然而,α-Fe_(2)O_(3)丰富的受体表面态和缓慢的水氧化动力学导致光生电荷复合严重,限制了其在光电化学中的实际应用.因此,有必要对α-Fe_(2)O_(3)进行表面工程设计以提高水氧化效率.本文提出了一种新方法,以金属有机框架(Ti-MOFs)为模板,在Ti-Fe_(2)O_(3)表面煅烧合成TiO_(2)层,然后将富活性位点的ZIF-67加载在TiO_(2)/Ti-Fe_(2)O_(3)上作为助催化剂,制备出具有较好光电化学性能的ZIF-67/TiO_(2)/Ti-Fe_(2)O_(3)复合光阳极.X射线衍射、高分辨透射电镜、X射线光电子能谱和拉曼光谱等表征结果证实成功合成了ZIF-67/TiO_(2)/Ti-Fe_(2)O_(3).同时,氮气等温吸附脱附曲线和表面接触角测试结果表明,MOFs衍生的TiO_(2)为介孔材料.采用表面光伏技术、光致发光光谱、飞秒-瞬态吸收光谱和电化学阻抗谱分析,研究了光生电荷的分离和复合行为.结果表明,MOFs衍生的TiO_(2)不仅可以作为钝化层有效抑制了表面复合,还作为Ti-Fe_(2)O_(3)的电子阻挡层,显著减少了电子向表面的流失,从而大大提高了Ti-Fe_(2)O_(3)表面和体相的电荷分离效率.进一步的累积电荷量测试、电化学阻抗谱和Bode图分析显示,负载MOFs衍生TiO_(2)后,可以明显促进光生空穴向电解质的注入,其多孔结构也可以增加反应接触面积,这有利于光生电荷在固液界面传输.此外,理论计算结果表明,Ti-Fe_(2)O_(3)水氧化速控步骤的能垒(ΔG=3.38 eV)明显高于TiO_(2)(ΔG=1.67 eV),说明OER更容易在TiO_(2)/Ti-Fe_(2)O_(3)表面发生,这与其光电流密度结果一致.为进一步提高反应活性和加快水氧化动力学,负载助催化剂ZIF-67后,ZIF-67/TiO_(2)/Ti-Fe_(2)O_(3)复合光阳极实现了较好的光电化学性能,其在1.23 V vs.RHE时光电流密度高达4.04 mA cm^(‒2),是Ti-Fe_(2)O_(3)的9.3倍,并且复合光阳极的入射光子电流转换效率和空穴注入效率分别达到93%(390 nm)和91%.综上所述,本研究通过MOFs衍生的TiO_(2)和ZIF-67助催化剂改性α-Fe_(2)O_(3)光阳极,显著提升了其光电化学水氧化性能.其中,MOFs衍生TiO_(2)不仅优化了电荷分离,还促进了光生空穴的注入,从而显著提高其光电化学水氧化性能.本研究为构筑高性能的有机-无机杂化光阳极提供了新思路.
文摘The photo-generated charge property of TiO 2 nanoparticles annealed at different temperatures was studied by the field induced surface photovoltage spectrum (FISPS) technique. The powder of TiO 2 was prepared and annealed at 400, 600 and 800 ℃, respectively. The crystalline of TiO 2 transformed from anatase to rutile with the annealing temperature increasesing. And the photo-generated charges property of TiO 2 behaves differently after it was annealed at different temperatures. When the powder was annealed at 400 ℃, the particle size is so small that the energy band can not be formed completely, so the bound exciton state was formed when it was illuminated by the proper incident light, and it inverse antisymmetrically under external field for locatization effect. While, the powder was annealed at 600 ℃, the surface phtovoltaic response presents the characteristics of homojunction for different crystalline interfaces. After being annealed at 800 ℃, the energy band was formed completely and the larger particle size(36 nm) was got. Consequently, a band for the dissociation of free exciton emerged in the band edge of the surface photovotaic response distinguished from the band-band transition, and the direction of the photovoltaic response resulted from the free excition is consistent with the external field, that is positive under positive field, and it inverse symmetrically under external field.
文摘The effect of built-in field on the surface photovoltage(SPV) response of ZnO nanoparticles was investigated by means of surface photovoltage spectroscopy(SPS). From the results of in situ SPS in atmosphere and in vacuum, we suggest that the built-in field should be a main condition for producing SPV response. By comparison of SPS with PL in vacuum as well as in atmosphere, we deduce that by changing the ambience of ZnO, its functional properties can be modulated.
