Zinc calcium phosphate （Zn-Ca-P） coating and cerium-doped zinc calcium phosphate （Zn-Ca-Ce-P） coating were prepared on AZ31 magnesium alloy. The chemical compositions, morphologies and corrosion resistance of coat...Zinc calcium phosphate （Zn-Ca-P） coating and cerium-doped zinc calcium phosphate （Zn-Ca-Ce-P） coating were prepared on AZ31 magnesium alloy. The chemical compositions, morphologies and corrosion resistance of coatings were investigated through energy-dispersive X-ray spectroscopy （EDS）, X-ray photoelectron spectroscopy （XPS）, X-ray diffraction （XRD）, electron probe micro-analysis （EPMA） and scanning electron microscopy （SEM） together with hydrogen volumetric and electrochemical tests. The results indicate that both coatings predominately contain crystalline hopeite （Zn3（PO4）2·4H2O）, Mg3（PO4）2 and Ca3（PO4）2, and traces of non-crystalline MgF2 and CaF2. The Zn-Ca-Ce-P coating is more compact than the Zn-Ca-P coating due to the formation of CePO4, and displays better corrosion resistance than the Zn-Ca-P coating. Both coatings protect the AZ31 Mg substrate only during an initial immersion period. The micro-galvanic corrosion between the coatings and their substrates leads to an increase of hydrogen evolution rate （HER） with extending the immersion time. The addition of Ce promotes the homogenous distribution of Ca and formation of hopeite. The Zn-Ca-Ce-P coating has the potential for the primer coating on magnesium alloys.展开更多
Effects of Zn content (0, 0.5%, 1.5% and 4.5%) on the hot tearing characteristics of Mg?2%Y alloy were studied in aconstrained rod casting (CRC) apparatus attached with a load cell and data acquisition system. The exp...Effects of Zn content (0, 0.5%, 1.5% and 4.5%) on the hot tearing characteristics of Mg?2%Y alloy were studied in aconstrained rod casting (CRC) apparatus attached with a load cell and data acquisition system. The experimental results indicate thatthe hot tearing susceptibility (HTS) is affected by the content of Zn. The Zn-free base alloy shows the lowest HTS. The HTS ofMg?xZn?2Y alloys increases with increasing Zn content, reaches the maximum at 1.5% Zn, and then decreases with further Znaddition. The high HTS observed in the alloy with 1.5% Zn is attributed to its high force release rate and large force drop duringsolidification. The hot cracks of casting are initiated and propagate along the dendritic or grain boundaries. The predictions of HTS ofMg?xZn?2Y alloys using ProCAST software are in good agreement with the results obtained by experimental measurements.展开更多
基金Project(51571134)supported by the National Natural Science Foundation of ChinaProject(2014TDJH104)supported by the SDUST Research Fund+1 种基金the Joint Innovative Centre for Safe and Effective Mining Technology and Equipment of Coal Resources,Shandong Province,ChinaProject(cstc2012jj A50034)supported by the Natural Science Foundation of Chongqing,China
文摘Zinc calcium phosphate （Zn-Ca-P） coating and cerium-doped zinc calcium phosphate （Zn-Ca-Ce-P） coating were prepared on AZ31 magnesium alloy. The chemical compositions, morphologies and corrosion resistance of coatings were investigated through energy-dispersive X-ray spectroscopy （EDS）, X-ray photoelectron spectroscopy （XPS）, X-ray diffraction （XRD）, electron probe micro-analysis （EPMA） and scanning electron microscopy （SEM） together with hydrogen volumetric and electrochemical tests. The results indicate that both coatings predominately contain crystalline hopeite （Zn3（PO4）2·4H2O）, Mg3（PO4）2 and Ca3（PO4）2, and traces of non-crystalline MgF2 and CaF2. The Zn-Ca-Ce-P coating is more compact than the Zn-Ca-P coating due to the formation of CePO4, and displays better corrosion resistance than the Zn-Ca-P coating. Both coatings protect the AZ31 Mg substrate only during an initial immersion period. The micro-galvanic corrosion between the coatings and their substrates leads to an increase of hydrogen evolution rate （HER） with extending the immersion time. The addition of Ce promotes the homogenous distribution of Ca and formation of hopeite. The Zn-Ca-Ce-P coating has the potential for the primer coating on magnesium alloys.
基金Financial supports from China Scholarship Council and Helmholtz Association of German Research Centers scholarship(No.2010821213) for Wang’s Ph D study in Helmholtz-Zentrum Geesthacht(HZG) are gratefully acknowledged
文摘Effects of Zn content (0, 0.5%, 1.5% and 4.5%) on the hot tearing characteristics of Mg?2%Y alloy were studied in aconstrained rod casting (CRC) apparatus attached with a load cell and data acquisition system. The experimental results indicate thatthe hot tearing susceptibility (HTS) is affected by the content of Zn. The Zn-free base alloy shows the lowest HTS. The HTS ofMg?xZn?2Y alloys increases with increasing Zn content, reaches the maximum at 1.5% Zn, and then decreases with further Znaddition. The high HTS observed in the alloy with 1.5% Zn is attributed to its high force release rate and large force drop duringsolidification. The hot cracks of casting are initiated and propagate along the dendritic or grain boundaries. The predictions of HTS ofMg?xZn?2Y alloys using ProCAST software are in good agreement with the results obtained by experimental measurements.
