Porcelain enamel coatings were widely applied for the protection of steel products because they offered high corrosion protection,resistance to heat and abrasion,high hardness,hygiene and ease of cleaning.The typical ...Porcelain enamel coatings were widely applied for the protection of steel products because they offered high corrosion protection,resistance to heat and abrasion,high hardness,hygiene and ease of cleaning.The typical process to produce enameled steels is roughly divided into two stages:the first stage consists of a forming process to give the desired shape to a steel substrate,and the second stage consists of a firing process to bond enamel frits on the substrate.This firing process requires a high temperature above 800 °C,which may lead to austenitic transformation and severe thermal deformation of the steel substrate.The aim of this study is to develop a finite element analysis (FE analysis) technique to predict the mechanical and thermal deformations of the enameled steels during forming and any further enameling process,including firing.The FE analysis involves analyzing the strain history of the steel substrate,which comprises the stress and thickness distributions of the substrate and its deformed shape,and the high-temperature behavior of the enamel coating layer.The validity of the FE analysis is verified through the U-bending test and firing test with various numbers and positions of enamel coating layers on the substrate.The results reveal that the FE analysis results agree well with the experimental results with 8% error.展开更多
The powder compaction simulations were performed to demonstrate deformation behavior of particles and estimate the effect of different punch speeds and particle diameters on the relative density of powder by a multi-p...The powder compaction simulations were performed to demonstrate deformation behavior of particles and estimate the effect of different punch speeds and particle diameters on the relative density of powder by a multi-particle finite element model(MPFEM). Individual particle discretized with a finite element mesh allows for a full description of the contact mechanics. In order to verify the reliability of compaction simulation by MPFEM, the compaction tests of porous aluminum with average particle size of 20 μm and 3 μm were performed at different ram speeds of 5, 15, 30 and 60 mm/min by MTS servo-hydraulic tester. The results show that the slow ram speed is of great advantage for powder densification in low compaction force due to sufficient particle rearrangement and compaction force increases with decrease in average particle size of aluminum.展开更多
Hot plate forming using a cell-typed die is a process for forming a large thick plate with a spherical shape for the manufacture of a large spherical LNG tank.Cell-typed upper and lower dies made of a framework of ste...Hot plate forming using a cell-typed die is a process for forming a large thick plate with a spherical shape for the manufacture of a large spherical LNG tank.Cell-typed upper and lower dies made of a framework of steel plates fitted to make a grid pattern are used in this process,and an air-cooling device is separately installed inside the lower die.A finite element analysis (FEA) technique was developed,which included hot forming,air flow,cooling and thermal deformation analysis for the hot plate forming process using the cell-typed die.Further,the convective and interface heat transfer coefficients were used to reproduce analytically the effects of the cooling device in the hot plate forming analysis.A small-scale model test of the process was conducted to verify the FEA technique.The analysis results show that the curvature of the final plate agrees well with that of the designed experiment within a maximum relative error of 0.03% at the corner of the plate.展开更多
One of the primary features of nano-indentation technique is that the contact area induced by an indenter is indirectly measured by a relationship between the penetration depth and the known geometry of the indenter.H...One of the primary features of nano-indentation technique is that the contact area induced by an indenter is indirectly measured by a relationship between the penetration depth and the known geometry of the indenter.However,this indirect measurement occasionally leads to inaccurate properties of the indented material.The objective of this study is to investigate the effects of E/σr and the strain hardening exponents n of materials on the behaviors of pile-up and sink-in in nano-indentation and to predict n values of materials from the residual indentation impressions.The relations between the residual indentation profile and n value of the indented material were identified by dimensional analysis.Also,they were numerically formulated using FE analysis of nano-indentation for 140 different combinations of elastic-plastic parameters such as E,σy and n.The parameters of hrp/hm,herp/hm,Rr/hm and HO&P/Hreal were introduced as various dimensionless parameters to represent and quantify the residual indentation profile after indentation.They were subsequently characterized as dimensionless functions using n and E/σr values.Finally,the validity of these functions was verified through 3D FE analysis of nano-indentation for Al 6061-T6 and AISI 1010 materials.展开更多
基金Project(NRF-2012R1A5A1048294)supported by the National Research Foundation of Korea(NRF)Grant funded by the Ministry of Education,Science and Technologythe LG Electronics
文摘Porcelain enamel coatings were widely applied for the protection of steel products because they offered high corrosion protection,resistance to heat and abrasion,high hardness,hygiene and ease of cleaning.The typical process to produce enameled steels is roughly divided into two stages:the first stage consists of a forming process to give the desired shape to a steel substrate,and the second stage consists of a firing process to bond enamel frits on the substrate.This firing process requires a high temperature above 800 °C,which may lead to austenitic transformation and severe thermal deformation of the steel substrate.The aim of this study is to develop a finite element analysis (FE analysis) technique to predict the mechanical and thermal deformations of the enameled steels during forming and any further enameling process,including firing.The FE analysis involves analyzing the strain history of the steel substrate,which comprises the stress and thickness distributions of the substrate and its deformed shape,and the high-temperature behavior of the enamel coating layer.The validity of the FE analysis is verified through the U-bending test and firing test with various numbers and positions of enamel coating layers on the substrate.The results reveal that the FE analysis results agree well with the experimental results with 8% error.
基金supported by a grant-in-aid for the National Core Research Center Program from the Ministry of Education Science & Technology,Koreathe Korea Science & Engineering Foundation (No.R15-2006-022-03003-0)
文摘The powder compaction simulations were performed to demonstrate deformation behavior of particles and estimate the effect of different punch speeds and particle diameters on the relative density of powder by a multi-particle finite element model(MPFEM). Individual particle discretized with a finite element mesh allows for a full description of the contact mechanics. In order to verify the reliability of compaction simulation by MPFEM, the compaction tests of porous aluminum with average particle size of 20 μm and 3 μm were performed at different ram speeds of 5, 15, 30 and 60 mm/min by MTS servo-hydraulic tester. The results show that the slow ram speed is of great advantage for powder densification in low compaction force due to sufficient particle rearrangement and compaction force increases with decrease in average particle size of aluminum.
基金Project(2010-0008-277)supported by the NCRC(National Core Research Center)Program through the National Research Foundation of Korea,funded by the Ministry of Education,Science,and TechnologyProject supported by R&D for Technology Development Program of Ministry of Knowledge Economy,Korea
文摘Hot plate forming using a cell-typed die is a process for forming a large thick plate with a spherical shape for the manufacture of a large spherical LNG tank.Cell-typed upper and lower dies made of a framework of steel plates fitted to make a grid pattern are used in this process,and an air-cooling device is separately installed inside the lower die.A finite element analysis (FEA) technique was developed,which included hot forming,air flow,cooling and thermal deformation analysis for the hot plate forming process using the cell-typed die.Further,the convective and interface heat transfer coefficients were used to reproduce analytically the effects of the cooling device in the hot plate forming analysis.A small-scale model test of the process was conducted to verify the FEA technique.The analysis results show that the curvature of the final plate agrees well with that of the designed experiment within a maximum relative error of 0.03% at the corner of the plate.
基金Project(2010-0008-277)supported by the NCRC(National Core Research Center)Program through the National Research Foundation of Koreafunded by the Ministry of Education,Science,and Technology,KoreaProject supported by R&D for Technology Development Program of Ministry of Knowledge Economy,Korea
文摘One of the primary features of nano-indentation technique is that the contact area induced by an indenter is indirectly measured by a relationship between the penetration depth and the known geometry of the indenter.However,this indirect measurement occasionally leads to inaccurate properties of the indented material.The objective of this study is to investigate the effects of E/σr and the strain hardening exponents n of materials on the behaviors of pile-up and sink-in in nano-indentation and to predict n values of materials from the residual indentation impressions.The relations between the residual indentation profile and n value of the indented material were identified by dimensional analysis.Also,they were numerically formulated using FE analysis of nano-indentation for 140 different combinations of elastic-plastic parameters such as E,σy and n.The parameters of hrp/hm,herp/hm,Rr/hm and HO&P/Hreal were introduced as various dimensionless parameters to represent and quantify the residual indentation profile after indentation.They were subsequently characterized as dimensionless functions using n and E/σr values.Finally,the validity of these functions was verified through 3D FE analysis of nano-indentation for Al 6061-T6 and AISI 1010 materials.
