Aeromagnetic data over the Mamfe Basin have been processed. A regional magnetic gridded dataset was obtained from the Total Magnetic Intensity (TMI) data grid using a 3 × 3 convolution (Hanning) filter to remove ...Aeromagnetic data over the Mamfe Basin have been processed. A regional magnetic gridded dataset was obtained from the Total Magnetic Intensity (TMI) data grid using a 3 × 3 convolution (Hanning) filter to remove regional trends. Major similarities in magnetic field orientation and intensities were observed at identical locations on both the regional and TMI data grids. From the regional and TMI gridded datasets, the residual dataset was generated which represents the very shallow geological features of the basin. Processing this residual data grid using the Source Parameter Imaging (SPI) for magnetic depth suggests that the estimated depths to magnetic sources in the basin range from about 271 m to 3552 m. The highest depths are located in two main locations somewhere around the central portion of the study area which correspond to the area with positive magnetic susceptibilities, as well as the areas extending outwards across the eastern boundary of the study area. Shallow magnetic depths are prominent towards the NW portion of the basin and also correspond to areas of negative magnetic susceptibilities. The basin generally exhibits a variation in depth of magnetic sources with high, average and shallow depths. The presence of intrusive igneous rocks was also observed in this basin. This characteristic is a pointer to the existence of geologic resources of interest for exploration in the basin.展开更多
The Gulf of Guinea constitutes an area of great petroleum potential yet with very limited geophysical research information. Consequently in this study, a Bouguer anomaly map has been computed from gravity data coverin...The Gulf of Guinea constitutes an area of great petroleum potential yet with very limited geophysical research information. Consequently in this study, a Bouguer anomaly map has been computed from gravity data covering regions stretching from the Cameroon coastal basins to Bioko island (formerly Fernando Po) which is part of Equatorial Guinea. The data were further processed for Source Edge Detection (SED), Euler 3D deconvolution, 3D surface oriented models and 3D voxel solutions. The results confirmed the presence of previously identified intrusive bodies around the Douala and Kribi/Campo sedimentary sub-basins and went ahead to suggest a probable continuity between these two. A possible extension of this body offshore the Gulf of Guinea right up to Bioko island with very striking similarities was also highlighted and it shows characteristic variations in the depth to the surface of the body at different locations.展开更多
Short period surface waves generated by a local earthquake recorded by broadband seismometers at distances of about 186 to 778 km from the earthquake’s epicenter located in Cameroon (Central Africa) were processed fo...Short period surface waves generated by a local earthquake recorded by broadband seismometers at distances of about 186 to 778 km from the earthquake’s epicenter located in Cameroon (Central Africa) were processed for group velocity maps and dispersion waveforms using the frequency time analysis (FTAN) method. The resulting group velocity fundamental modes of the extracted Rayleigh and Love waves were used for a joint amplitude spectral and P polarity inversion using moment tensor inversion. The corresponding group velocity dispersion curves, the residual as a function of depth, the amplitude spectra and the moment tensor solutions of the regions from the epicenter to the different stations up to a depth of about 10 km were obtained.展开更多
Teleseismic events recorded by stations located in the Adamawa Plateau have been treated using the inversion method of receiver functions. These six stations are part of a network of 32 large strip seismic stations in...Teleseismic events recorded by stations located in the Adamawa Plateau have been treated using the inversion method of receiver functions. These six stations are part of a network of 32 large strip seismic stations installed in Cameroon between 2005 and 2007. This method allowed us to investigate the lithospheric mantle in that region. The results obtained from the velocity model have been compared to some existing results in this region. These results show the existence of a thick crust having an average thickness of about 35.2 km and a corresponding S wave velocity of 3.7 km/s. For an average S wave velocity of 4.4 km/s the lithospheric mantle appears to be thin in nature and has a thickness that varies from 39 km and 49.6 km. Beyond the lower lithospheric mantle, there exists a low velocity zone, whose thickness varies between 20 km and 43.9 km. The variation of the low velocity zone leads to variation of the lower boundary of the lithospheric mantle boundary at the depths ranging from 73.8 km and 85 km.展开更多
Geoelectric data obtained from forty (40) vertical electrical soundings collected with a Schlumberger device in the Adamawa plateau region, also known as the Cameroon water tower, have been treated by the least-square...Geoelectric data obtained from forty (40) vertical electrical soundings collected with a Schlumberger device in the Adamawa plateau region, also known as the Cameroon water tower, have been treated by the least-squares inversion method. In order to study the nature and thickness of the aquifer and the necessary geoelectric parameters, quantitative and qualitative interpretations of the data were made. The results obtained showed that: about four to five geoelectric layers have been delimited in the study area with a dominance of the KH curve, which can be used as a reference for future studies. The first two layers constitute an association of clay and laterite with resistivity values ranging from 58 to 9122 Ω·m and whose thickness is between 0.6 and 13.4 m. The third layer is a potentially aquiferous laterite composed of clay, laterite and especially clay sand and cracked/good granite, with a dominance of sandy alteration whose resistivity values are between 81 and 960 Ω·m and its thickness between 12.2 and 26.8 m. The fourth and fifth layers are made up of cracked/good granite with a resistivity ranging from 12-10705 Ω·m with an average value of 1817 Ω·m. This study also shows that the North-East, South-West and South sectors could be the groundwater convergence zones and that the average depth of the basement aquifer roof is about 28.3 m. The geoelectric sections of certain demarcated vertical electrical sounding stations are consistent with the geologic description of the area.展开更多
Gravity studies have been carried out in the Douala sub-basin which is a sedimentary basin located both onshore and offshore on the South coast of Cameroon between latitudes 3°03'N and 4°06'N and lon...Gravity studies have been carried out in the Douala sub-basin which is a sedimentary basin located both onshore and offshore on the South coast of Cameroon between latitudes 3°03'N and 4°06'N and longitudes 9°00' and 10°00'E, covering a total surface area of 12,805 km2. On its onshore portion, the Douala sub-basin has a trapezoic shape and covers a total surface area of about 6955 km2 while the offshore part covers an area of about 5850 km2. Gravity data used in this study are constituted of 912 gravity data points located between longitudes 8°10.2' to 10°59.4'E and latitudes 2°30.6' to 4°59.4'N and the study area is located to the NW section of the onshore portion of the Douala sub-basin. This study area is characterised by considerably high positive anomalies attaining peak values of about 104.1 mGals at longitude 9°9.9' and latitude 4°1.1' with contour lines which are mostly oriented in the NNE direction. Residual anomalies were extracted by upward continuation of the Bouguer anomaly field at an optimum height of 30 km. This residual field and those obtained by the separation of polynomial of order 4 had a very high correlation coefficient factor of 0.979. The multi-scale horizontal derivative of the vertical derivative (MSHDVD) method was applied on the extracted residual anomalies for the delimitation of possible contacts in the source while the amplitude spectrum was used to estimate the depth to the top of the potential field source. The MSHDVD method did not delimite any clear cut contacts in the source but the amplitude spectrum estimated the potential field source at a depth of about 4.8 km. The ideal body theory was used to determine the density contrast along a 65 km NW-SE profile yielding a value of 0.266 g/cm3. 2.5D modelling aimed at bringing out the underlying structural layout of this study area presents a source body which is very probably an intrusive igneous block surrounded by sedimentary formations and having a density of 2.77 g/cm3 at a depth of about 5.88 km below the surface and an average thickness of about 26.95 km.展开更多
Gravity data have been processed in the Douala sedimentary sub-basin in a section consisting of a set of 116 gravity data points located between latitudes 3°03'N and 4°06'N and longitudes 9°00&#...Gravity data have been processed in the Douala sedimentary sub-basin in a section consisting of a set of 116 gravity data points located between latitudes 3°03'N and 4°06'N and longitudes 9°00'E and 10°00'E. The established Bouguer anomaly fields and the Residual anomaly fields, extracted by upward continuation at an optimum height of 30 km, were both characterized by considerably high positive anomalies. These anomalies showed many ring-like positive gravity anomaly contour lines in the study region. Gravity gradients were analysed using the multi-scale horizontal derivative of the vertical derivative (MSHDVD) method, and this excluded the existence of fault lines across this region. Amplitude spectrum was used to estimate the potential field source at a depth of about 4.8 km. The ideal body theory capable of handling sparse data contaminated with noise was applied along a 50.2 km WWS-EEN profile to determine a density contrast of 0.266 g/cm3. Using these results as constraints, 2.5 D modelling carried out along this profile presented two major blocks with density contrast of 0.266 g/cm3. The first block is probably an intrusive igneous body with a density of about 2.77 g/cm3 , having an average thickness of about 26 km with its top and base lying at depths of about 4.25 km and 30.25 km respectively. The second block is likely a pillar of igneous material, located at a depth of about 10.77 km with a density of about 2.77 g/cm3 whose base goes deep down beyond the crust-mantle boundary. These results support previous findings that there are similarities between the Douala sedimentary sub-basin and the coastal sedimentary basin of Mauritania-Senegal and thus foster the suggestions of a more extensive movement that would have affected the whole of the West African coast.展开更多
An earthquake of magnitude Ml = 3.04 was detected on the 19 of March 2005 at 11:49:18.31 (local time) by seven broadband seismometers located around Cameroon (Central Africa). Its epicenter has been relocated and foun...An earthquake of magnitude Ml = 3.04 was detected on the 19 of March 2005 at 11:49:18.31 (local time) by seven broadband seismometers located around Cameroon (Central Africa). Its epicenter has been relocated and found to be in Monatele (Cameroon) with latitude 4°26.34' and longitude 10°59.62'. The fault-plane solution calculated using double couple fault-plane solutions based on P-wave polarity readings, also taking into consideration the dextral nature of the Sanaga Fault (SF) underlying this region of the epicenter, is a strike-slip fault with a normal faulting component. The beach ball representation of this fault-plane solution has strike, dip and rake values of 289, 70, -169 for the principal fault plane and 195, 80, -20 for the auxiliary fault plane.展开更多
Teleseismic events have been selected from a database of earthquakes with three components which were recorded between February 2005 and January 2007 by five seismic stations across the Garoua rift region which consti...Teleseismic events have been selected from a database of earthquakes with three components which were recorded between February 2005 and January 2007 by five seismic stations across the Garoua rift region which constitutes a part of the Cameroon Volcanic Line (CVL). The iterative time deconvolution performed by [1] applied on these teleseismic events, permitted us to obtain P-receiver functions. The latter were subsequently inverted in order to obtain S-wave velocity models with respect to depth which were then associated to the synthetic receiver functions. This made it possible to explain the behavior of the wave and the medium through which they traveled. The main results obtained indicate that: (1) The lithosphere appears to be thin in its crustal part with a mean Moho depth of 28 km and S wave velocity of 3.7 km/s. (2) In its mantle part, the lithosphere is thick in nature having a thickness that varies between 42 km and 67.2 km. The greatest depth is noticed towards the center located around Garoua while the least depth corresponds to a location around Yagoua in the North. The Low velocity zone which makes it possible to determine the depth of the lithosphere was seen to have a thickness which varies between 42 km and 118.8 km. (3) The synthetic receiver functions associated to shear velocity models reveal that, on one hand the wave has really undergone a conversion and multiple conversions such that the existing Ps phase and subsequent reverberations PpPs and PpSs have mean times of 3.7 s, 11 s and 17.6 s respectively. On the other hand, they reveal an attenuation shown by the decrease in the amplitude of the aforementioned phases along a South-North direction in the Garoua rift.展开更多
文摘Aeromagnetic data over the Mamfe Basin have been processed. A regional magnetic gridded dataset was obtained from the Total Magnetic Intensity (TMI) data grid using a 3 × 3 convolution (Hanning) filter to remove regional trends. Major similarities in magnetic field orientation and intensities were observed at identical locations on both the regional and TMI data grids. From the regional and TMI gridded datasets, the residual dataset was generated which represents the very shallow geological features of the basin. Processing this residual data grid using the Source Parameter Imaging (SPI) for magnetic depth suggests that the estimated depths to magnetic sources in the basin range from about 271 m to 3552 m. The highest depths are located in two main locations somewhere around the central portion of the study area which correspond to the area with positive magnetic susceptibilities, as well as the areas extending outwards across the eastern boundary of the study area. Shallow magnetic depths are prominent towards the NW portion of the basin and also correspond to areas of negative magnetic susceptibilities. The basin generally exhibits a variation in depth of magnetic sources with high, average and shallow depths. The presence of intrusive igneous rocks was also observed in this basin. This characteristic is a pointer to the existence of geologic resources of interest for exploration in the basin.
文摘The Gulf of Guinea constitutes an area of great petroleum potential yet with very limited geophysical research information. Consequently in this study, a Bouguer anomaly map has been computed from gravity data covering regions stretching from the Cameroon coastal basins to Bioko island (formerly Fernando Po) which is part of Equatorial Guinea. The data were further processed for Source Edge Detection (SED), Euler 3D deconvolution, 3D surface oriented models and 3D voxel solutions. The results confirmed the presence of previously identified intrusive bodies around the Douala and Kribi/Campo sedimentary sub-basins and went ahead to suggest a probable continuity between these two. A possible extension of this body offshore the Gulf of Guinea right up to Bioko island with very striking similarities was also highlighted and it shows characteristic variations in the depth to the surface of the body at different locations.
文摘Short period surface waves generated by a local earthquake recorded by broadband seismometers at distances of about 186 to 778 km from the earthquake’s epicenter located in Cameroon (Central Africa) were processed for group velocity maps and dispersion waveforms using the frequency time analysis (FTAN) method. The resulting group velocity fundamental modes of the extracted Rayleigh and Love waves were used for a joint amplitude spectral and P polarity inversion using moment tensor inversion. The corresponding group velocity dispersion curves, the residual as a function of depth, the amplitude spectra and the moment tensor solutions of the regions from the epicenter to the different stations up to a depth of about 10 km were obtained.
文摘Teleseismic events recorded by stations located in the Adamawa Plateau have been treated using the inversion method of receiver functions. These six stations are part of a network of 32 large strip seismic stations installed in Cameroon between 2005 and 2007. This method allowed us to investigate the lithospheric mantle in that region. The results obtained from the velocity model have been compared to some existing results in this region. These results show the existence of a thick crust having an average thickness of about 35.2 km and a corresponding S wave velocity of 3.7 km/s. For an average S wave velocity of 4.4 km/s the lithospheric mantle appears to be thin in nature and has a thickness that varies from 39 km and 49.6 km. Beyond the lower lithospheric mantle, there exists a low velocity zone, whose thickness varies between 20 km and 43.9 km. The variation of the low velocity zone leads to variation of the lower boundary of the lithospheric mantle boundary at the depths ranging from 73.8 km and 85 km.
文摘Geoelectric data obtained from forty (40) vertical electrical soundings collected with a Schlumberger device in the Adamawa plateau region, also known as the Cameroon water tower, have been treated by the least-squares inversion method. In order to study the nature and thickness of the aquifer and the necessary geoelectric parameters, quantitative and qualitative interpretations of the data were made. The results obtained showed that: about four to five geoelectric layers have been delimited in the study area with a dominance of the KH curve, which can be used as a reference for future studies. The first two layers constitute an association of clay and laterite with resistivity values ranging from 58 to 9122 Ω·m and whose thickness is between 0.6 and 13.4 m. The third layer is a potentially aquiferous laterite composed of clay, laterite and especially clay sand and cracked/good granite, with a dominance of sandy alteration whose resistivity values are between 81 and 960 Ω·m and its thickness between 12.2 and 26.8 m. The fourth and fifth layers are made up of cracked/good granite with a resistivity ranging from 12-10705 Ω·m with an average value of 1817 Ω·m. This study also shows that the North-East, South-West and South sectors could be the groundwater convergence zones and that the average depth of the basement aquifer roof is about 28.3 m. The geoelectric sections of certain demarcated vertical electrical sounding stations are consistent with the geologic description of the area.
文摘Gravity studies have been carried out in the Douala sub-basin which is a sedimentary basin located both onshore and offshore on the South coast of Cameroon between latitudes 3°03'N and 4°06'N and longitudes 9°00' and 10°00'E, covering a total surface area of 12,805 km2. On its onshore portion, the Douala sub-basin has a trapezoic shape and covers a total surface area of about 6955 km2 while the offshore part covers an area of about 5850 km2. Gravity data used in this study are constituted of 912 gravity data points located between longitudes 8°10.2' to 10°59.4'E and latitudes 2°30.6' to 4°59.4'N and the study area is located to the NW section of the onshore portion of the Douala sub-basin. This study area is characterised by considerably high positive anomalies attaining peak values of about 104.1 mGals at longitude 9°9.9' and latitude 4°1.1' with contour lines which are mostly oriented in the NNE direction. Residual anomalies were extracted by upward continuation of the Bouguer anomaly field at an optimum height of 30 km. This residual field and those obtained by the separation of polynomial of order 4 had a very high correlation coefficient factor of 0.979. The multi-scale horizontal derivative of the vertical derivative (MSHDVD) method was applied on the extracted residual anomalies for the delimitation of possible contacts in the source while the amplitude spectrum was used to estimate the depth to the top of the potential field source. The MSHDVD method did not delimite any clear cut contacts in the source but the amplitude spectrum estimated the potential field source at a depth of about 4.8 km. The ideal body theory was used to determine the density contrast along a 65 km NW-SE profile yielding a value of 0.266 g/cm3. 2.5D modelling aimed at bringing out the underlying structural layout of this study area presents a source body which is very probably an intrusive igneous block surrounded by sedimentary formations and having a density of 2.77 g/cm3 at a depth of about 5.88 km below the surface and an average thickness of about 26.95 km.
文摘Gravity data have been processed in the Douala sedimentary sub-basin in a section consisting of a set of 116 gravity data points located between latitudes 3°03'N and 4°06'N and longitudes 9°00'E and 10°00'E. The established Bouguer anomaly fields and the Residual anomaly fields, extracted by upward continuation at an optimum height of 30 km, were both characterized by considerably high positive anomalies. These anomalies showed many ring-like positive gravity anomaly contour lines in the study region. Gravity gradients were analysed using the multi-scale horizontal derivative of the vertical derivative (MSHDVD) method, and this excluded the existence of fault lines across this region. Amplitude spectrum was used to estimate the potential field source at a depth of about 4.8 km. The ideal body theory capable of handling sparse data contaminated with noise was applied along a 50.2 km WWS-EEN profile to determine a density contrast of 0.266 g/cm3. Using these results as constraints, 2.5 D modelling carried out along this profile presented two major blocks with density contrast of 0.266 g/cm3. The first block is probably an intrusive igneous body with a density of about 2.77 g/cm3 , having an average thickness of about 26 km with its top and base lying at depths of about 4.25 km and 30.25 km respectively. The second block is likely a pillar of igneous material, located at a depth of about 10.77 km with a density of about 2.77 g/cm3 whose base goes deep down beyond the crust-mantle boundary. These results support previous findings that there are similarities between the Douala sedimentary sub-basin and the coastal sedimentary basin of Mauritania-Senegal and thus foster the suggestions of a more extensive movement that would have affected the whole of the West African coast.
文摘An earthquake of magnitude Ml = 3.04 was detected on the 19 of March 2005 at 11:49:18.31 (local time) by seven broadband seismometers located around Cameroon (Central Africa). Its epicenter has been relocated and found to be in Monatele (Cameroon) with latitude 4°26.34' and longitude 10°59.62'. The fault-plane solution calculated using double couple fault-plane solutions based on P-wave polarity readings, also taking into consideration the dextral nature of the Sanaga Fault (SF) underlying this region of the epicenter, is a strike-slip fault with a normal faulting component. The beach ball representation of this fault-plane solution has strike, dip and rake values of 289, 70, -169 for the principal fault plane and 195, 80, -20 for the auxiliary fault plane.
文摘Teleseismic events have been selected from a database of earthquakes with three components which were recorded between February 2005 and January 2007 by five seismic stations across the Garoua rift region which constitutes a part of the Cameroon Volcanic Line (CVL). The iterative time deconvolution performed by [1] applied on these teleseismic events, permitted us to obtain P-receiver functions. The latter were subsequently inverted in order to obtain S-wave velocity models with respect to depth which were then associated to the synthetic receiver functions. This made it possible to explain the behavior of the wave and the medium through which they traveled. The main results obtained indicate that: (1) The lithosphere appears to be thin in its crustal part with a mean Moho depth of 28 km and S wave velocity of 3.7 km/s. (2) In its mantle part, the lithosphere is thick in nature having a thickness that varies between 42 km and 67.2 km. The greatest depth is noticed towards the center located around Garoua while the least depth corresponds to a location around Yagoua in the North. The Low velocity zone which makes it possible to determine the depth of the lithosphere was seen to have a thickness which varies between 42 km and 118.8 km. (3) The synthetic receiver functions associated to shear velocity models reveal that, on one hand the wave has really undergone a conversion and multiple conversions such that the existing Ps phase and subsequent reverberations PpPs and PpSs have mean times of 3.7 s, 11 s and 17.6 s respectively. On the other hand, they reveal an attenuation shown by the decrease in the amplitude of the aforementioned phases along a South-North direction in the Garoua rift.
