Three-dimensional(3D)printing technology has been widely used to create artificial rock samples in rock mechanics.While 3D printing can create complex fractures,the material still lacks sufficient similarity to natura...Three-dimensional(3D)printing technology has been widely used to create artificial rock samples in rock mechanics.While 3D printing can create complex fractures,the material still lacks sufficient similarity to natural rock.Extrusion free forming(EFF)is a 3D printing technique that uses clay as the printing material and cures the specimens through high-temperature sintering.In this study,we attempted to use the EFF technology to fabricate artificial rock specimens.The results show the physico-mechanical properties of the specimens are significantly affected by the sintering temperature,while the nozzle diameter and layer thickness also have a certain impact.The specimens are primarily composed of SiO_(2),with mineral compositions similar to that of natural rocks.The density,uniaxial compressive strength(UCS),elastic modulus,and tensile strength of the printed specimens fall in the range of 1.65–2.54 g/cm3,16.46–50.49 MPa,2.17–13.35 GPa,and 0.82–17.18 MPa,respectively.It is capable of simulating different types of rocks,especially mudstone,sandstone,limestone,and gneiss.However,the simulation of hard rocks with UCS exceeding 50 MPa still requires validation.展开更多
In deep-earth engineering,the high earth temperature can significantly affect the rock's mechanical properties,especially when the rock is cooled during the construction process.Accordingly,whether the cooling spe...In deep-earth engineering,the high earth temperature can significantly affect the rock's mechanical properties,especially when the rock is cooled during the construction process.Accordingly,whether the cooling speed affects the mechanical and physical properties of rocks is worth to be investigated.The present study explored the influence of the cooling rate on the physical and chemical properties of granite heated at 25–800°C.The mechanical and physical properties involved in this study included uniaxial compression strength,peak strain,modulus,P-wave velocity,mass and volume,the change of which could reflect the sensitivity of granite to the cooling rate.Acoustic emission(AE)monitoring,microscopic observation,and X-ray diffraction(XRD)are used to analyze the underlying damage mechanism.It is found that more AE signals and large-scale cracks are accounted for based on the b-value method when the specimens are cooled by water.Furthermore,the microscopic observation by polarized light microscopy indicates that the density,opening degree,and connectivity of the cracks under water cooling mode are higher than that under natural cooling mode.In addition,the XRD illustrates that there is no obvious change in mineral content and diffraction angle at different temperatures,which confirms that the change of mechanical properties is not related to the chemical properties.The present conclusion can provide a perspective to assess the damage caused by different cooling methods to hot rocks.展开更多
基金financially supported by the Beijing Natural Science Foundation for Young Scientists(Grant No.8214052)the Talent Fund of Beijing Jiaotong University(Grant No.2021RC226)the State Key Laboratory for GeoMechanics and Deep Underground Engineering,China University of Mining and Technology(Grant No.SKLGDUEK2115).
文摘Three-dimensional(3D)printing technology has been widely used to create artificial rock samples in rock mechanics.While 3D printing can create complex fractures,the material still lacks sufficient similarity to natural rock.Extrusion free forming(EFF)is a 3D printing technique that uses clay as the printing material and cures the specimens through high-temperature sintering.In this study,we attempted to use the EFF technology to fabricate artificial rock specimens.The results show the physico-mechanical properties of the specimens are significantly affected by the sintering temperature,while the nozzle diameter and layer thickness also have a certain impact.The specimens are primarily composed of SiO_(2),with mineral compositions similar to that of natural rocks.The density,uniaxial compressive strength(UCS),elastic modulus,and tensile strength of the printed specimens fall in the range of 1.65–2.54 g/cm3,16.46–50.49 MPa,2.17–13.35 GPa,and 0.82–17.18 MPa,respectively.It is capable of simulating different types of rocks,especially mudstone,sandstone,limestone,and gneiss.However,the simulation of hard rocks with UCS exceeding 50 MPa still requires validation.
基金The National Natural Science Foundation of China,Grant/Award Number:41702326the Innovative Experts,Long-term Program of Jiangxi Province,Grant/Award Number:jxsq2018106049+1 种基金the Natural Science Foundation of Jiangxi Province,Grant/Award Number:20202ACB214006the Supported by Program of Qingjiang Excellent Young Talents,Jiangxi University of Science and Technology。
文摘In deep-earth engineering,the high earth temperature can significantly affect the rock's mechanical properties,especially when the rock is cooled during the construction process.Accordingly,whether the cooling speed affects the mechanical and physical properties of rocks is worth to be investigated.The present study explored the influence of the cooling rate on the physical and chemical properties of granite heated at 25–800°C.The mechanical and physical properties involved in this study included uniaxial compression strength,peak strain,modulus,P-wave velocity,mass and volume,the change of which could reflect the sensitivity of granite to the cooling rate.Acoustic emission(AE)monitoring,microscopic observation,and X-ray diffraction(XRD)are used to analyze the underlying damage mechanism.It is found that more AE signals and large-scale cracks are accounted for based on the b-value method when the specimens are cooled by water.Furthermore,the microscopic observation by polarized light microscopy indicates that the density,opening degree,and connectivity of the cracks under water cooling mode are higher than that under natural cooling mode.In addition,the XRD illustrates that there is no obvious change in mineral content and diffraction angle at different temperatures,which confirms that the change of mechanical properties is not related to the chemical properties.The present conclusion can provide a perspective to assess the damage caused by different cooling methods to hot rocks.
