The Lobster Eye Imager for Astronomy(LEIA),a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe mission,was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on20...The Lobster Eye Imager for Astronomy(LEIA),a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe mission,was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on2022 July 27.In this paper,we introduce the design and on-ground test results of the LEIA instrument.Using stateof-the-art Micro-Pore Optics(MPO),a wide field of view of 346 square degrees(18.6°×18.6°)of the X-ray imager is realized.An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons,and four large-format complementary metal-oxide semiconductor(CMOS)sensors,each of size 6 cm×6 cm,are used as the focal plane detectors.The instrument has an angular resolution of 4’-8’(in terms of FWHM)for the central focal spot of the point-spread function,and an effective area of 2-3 cm^(2) at 1 keV in essentially all the directions within the field of view.The detection passband is 0.5-4 keV in soft X-rays and the sensitivity is2-3×10^(-11) erg s^(-1) cm^(-2)(about 1 milliCrab)with a 1000 s observation.The total weight of LEIA is 56 kg and the power is 85 W.The satellite,with a design lifetime of 2 yr,operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes.LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation,and by optimizing the working setups of the instrumental parameters.In addition,LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band,albeit with limited useful observing time available.展开更多
To overcome the limitation in formability at room temperature,manufacturers have developed magnesium alloys with remarkable properties by adding rare-earth elements.The rare-earth magnesium alloys behave differently f...To overcome the limitation in formability at room temperature,manufacturers have developed magnesium alloys with remarkable properties by adding rare-earth elements.The rare-earth magnesium alloys behave differently from the conventional alloys,especially with respect to their coupled anisotropic and strain rate sensitive behavior.In the current work,such behavior of the rare-earth Mg alloy ZEK100 sheet at room temperature is investigated with the aid of the elastic viscoplastic self-consistent polycrystal plasticity model.Different strain rate sensitivities(SRSs)for various deformation modes are employed by the model to simulate the strain rate sensitive behaviors under different loading directions and loading rates.Good agreement between the experiments and simulations reveals the importance and necessity of using different SRSs for each deformation mode in hexagonal close-packed metals.Furthermore,the relative activities of each deformation mode and the texture evolution during different loadings are discussed.The anisotropic and strain rate sensitive behavior is ascribed to the various operating deformation modes with different SRSs during loading along different directions.展开更多
Lightweight ZEK100-0 Mg alloy and A16022-T43 Al alloy with an Ag interlayer were joined via ultrasonic spot welding(USW),focusing on the microstructural change and tensile lap shear strength of the welded joints in re...Lightweight ZEK100-0 Mg alloy and A16022-T43 Al alloy with an Ag interlayer were joined via ultrasonic spot welding(USW),focusing on the microstructural change and tensile lap shear strength of the welded joints in relation to welding energy.Mg/Al interface was superseded by Mg/Ag and Al/Ag interfaces,and unfavorable Mg门A-intermetallic compound was eliminated.Ag foil was observed to be intact in the nugget center,while it was broken or dissolved at the nugget edge at high welding energy levels.The diffusion layer at the Mg/Ag interface consisted of two distinctive sub-layers:Mg3Ag intermetallic compound adjoining Ag foil,and Mg3Ag-l-Mg eutectic structure adjacent to Mg.Only a thin diffusion layer consisting mainly of Ag3Al occurred al lhe Al/Ag interface.The tensile lap shear strength first increased,reached its peak value,and then decreased with increasing welding energy.The shear strength achieved in the present study was〜31%higher than that of the joint without interlayer.Interfacial failure occurred at all energy levels,with Ag foil particles or fragments being stuck on both Mg and Al sides due to its intense interaction with Mg and Al via accelerated diffusion during USW.The results obtained pave the way for the challenging dissimilar welding between Mg and Al alloys.展开更多
TiNi alloy has a high resistance to wear and could be an excellent candidate for various tribological applications. But studies show that oxygen active elements can improve properties of some alloys, markedly. Yttrium...TiNi alloy has a high resistance to wear and could be an excellent candidate for various tribological applications. But studies show that oxygen active elements can improve properties of some alloys, markedly. Yttrium is one of the oxygen active elements. In this paper, the effects of yttria addition on properties of TiNi have been studied via micro-indentation, hardness, wear and corrosive wear tests. It is demonstrated that by addition of yttria to 5%, TiNi alloy can own improved mechanical properties and resistance to wear and corrosive wear.展开更多
We report systematic studies of laser-driven proton beams produced with micrometer-thick solid targets made of aluminum and plastic,respectively.Distinct effects of the target materials are found on the total charge,c...We report systematic studies of laser-driven proton beams produced with micrometer-thick solid targets made of aluminum and plastic,respectively.Distinct effects of the target materials are found on the total charge,cutoff energy,and beam spot of protons in the experiments,and these are described well by two-dimensional particle-in-cell simulations incorporating intrinsic material properties.It is found that with a laser intensity of 8×10^(19) W/cm^(2),target normal sheath acceleration is the dominant mechanism for both types of target.For a plastic target,the higher charge and cutoff energy of the protons are due to the greater energy coupling efficiencies from the intense laser beams,and the larger divergence angle of the protons is due to the deflection of hot electrons during transport in the targets.We also find that the energy loss of hot electrons in targets of different thickness has a significant effect on the proton cutoff energy.The consistent results obtained here further narrow the gap between simulations and experiments.展开更多
The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of...The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or higher.The STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard Model.The STCF project in China is under development with an extensive R&D program.This document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&D and physics case studies.展开更多
The aim of this study was to evaluate the strain hardening and hot deformation behavior of asextruded Mg-Zn-Mn （ZM31） magnesium alloy with varying Y contents （0.3, 3.2, and 6 wt%） via compression testing along the...The aim of this study was to evaluate the strain hardening and hot deformation behavior of asextruded Mg-Zn-Mn （ZM31） magnesium alloy with varying Y contents （0.3, 3.2, and 6 wt%） via compression testing along the extrusion direction at room temperature, 200℃ and 300 ℃. Texture and phases were identified by X-ray diffraction. Alloy ZM31 ＋ 0.3Y consisted of a mixture of fine equiaxed grains and elon- gated grains with 1-phase （Mg3YZno）; alloy ZM31 ＋ 3.2Y contained 1-phase and W-phase （Mg3Y2Zn3）; alloy ZM31 ＋ 6Y had long-period stacking-ordered （LPSO） X-phase （Mg12YZn） and Mg24Y5 particles. With increasing Y content the basal texture became weakened significantly. While alloys ZM31 ＋ 0.3Y and ZM31 ＋ 3.2Y exhibited a skewed true stress-true stain curve with a three-stage strain hardening feature caused by the occurrence of {1072} extension twinning, the true stress-true stain curve of alloy ZM31 ＋ 6Y was normal due to the dislocation slip during compression. With increasing temperature the extent of skewness decreased. While the compressive yield stress, ultimate compressive stress, strain hardening exponent, and hardening capacity all decreased as the temperature increased, the retention of the high- temperature deformation resistance increased with increasing Y content mainly due to the presence of thermally-stable LPSO X-ohase.展开更多
Fracture toughness determines materials＇ resistance to fracture, which is measured often using impact or bending tests. However, it is difficult to evaluate fracture toughness of coatings and small samples.In this ar...Fracture toughness determines materials＇ resistance to fracture, which is measured often using impact or bending tests. However, it is difficult to evaluate fracture toughness of coatings and small samples.In this article, using white irons as sample materials, we explore a possible approach of using electron work function（EWF） as an indicator in evaluating fracture toughness of hard metallic materials. This parameter is promising for being utilized to analyze toughness of protective coatings and small objects as well as bulk materials. Through comparison with results obtained from impact tests and elastic modulus measurement, effectiveness of this EWF approach is demonstrated.展开更多
基金supported by the Einstein Probe project,a mission in the Strategic Priority Program on Space Science of CAS(grant Nos.XDA15310000,XDA15052100)in part been supported by the European Union’s Horizon 2020 Program under the AHEAD2020 project(grant No.871158).
文摘The Lobster Eye Imager for Astronomy(LEIA),a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe mission,was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on2022 July 27.In this paper,we introduce the design and on-ground test results of the LEIA instrument.Using stateof-the-art Micro-Pore Optics(MPO),a wide field of view of 346 square degrees(18.6°×18.6°)of the X-ray imager is realized.An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons,and four large-format complementary metal-oxide semiconductor(CMOS)sensors,each of size 6 cm×6 cm,are used as the focal plane detectors.The instrument has an angular resolution of 4’-8’(in terms of FWHM)for the central focal spot of the point-spread function,and an effective area of 2-3 cm^(2) at 1 keV in essentially all the directions within the field of view.The detection passband is 0.5-4 keV in soft X-rays and the sensitivity is2-3×10^(-11) erg s^(-1) cm^(-2)(about 1 milliCrab)with a 1000 s observation.The total weight of LEIA is 56 kg and the power is 85 W.The satellite,with a design lifetime of 2 yr,operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes.LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation,and by optimizing the working setups of the instrumental parameters.In addition,LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band,albeit with limited useful observing time available.
基金supported by the National Natural Science Foundation of China(No.51975365)the Shanghai Pujiang Program(18PJ1405000)+1 种基金supported by the Natural Sciences and Engineering Research Council of Canada(NSERC)the Province of Ontario
文摘To overcome the limitation in formability at room temperature,manufacturers have developed magnesium alloys with remarkable properties by adding rare-earth elements.The rare-earth magnesium alloys behave differently from the conventional alloys,especially with respect to their coupled anisotropic and strain rate sensitive behavior.In the current work,such behavior of the rare-earth Mg alloy ZEK100 sheet at room temperature is investigated with the aid of the elastic viscoplastic self-consistent polycrystal plasticity model.Different strain rate sensitivities(SRSs)for various deformation modes are employed by the model to simulate the strain rate sensitive behaviors under different loading directions and loading rates.Good agreement between the experiments and simulations reveals the importance and necessity of using different SRSs for each deformation mode in hexagonal close-packed metals.Furthermore,the relative activities of each deformation mode and the texture evolution during different loadings are discussed.The anisotropic and strain rate sensitive behavior is ascribed to the various operating deformation modes with different SRSs during loading along different directions.
基金The authors would like to thank the National Natural Science Foundation of China(Grant No.51971183)Natural Sciences and Engineering Research Council of Canada(NSERC)+1 种基金Fundamental Research Funds for the Central Universities(XDJK2018B108,SWU119065)Venture and Innovation Support Program for Chongqing Overseas Returnees(CX2018082)in the form of international research collaboration.
文摘Lightweight ZEK100-0 Mg alloy and A16022-T43 Al alloy with an Ag interlayer were joined via ultrasonic spot welding(USW),focusing on the microstructural change and tensile lap shear strength of the welded joints in relation to welding energy.Mg/Al interface was superseded by Mg/Ag and Al/Ag interfaces,and unfavorable Mg门A-intermetallic compound was eliminated.Ag foil was observed to be intact in the nugget center,while it was broken or dissolved at the nugget edge at high welding energy levels.The diffusion layer at the Mg/Ag interface consisted of two distinctive sub-layers:Mg3Ag intermetallic compound adjoining Ag foil,and Mg3Ag-l-Mg eutectic structure adjacent to Mg.Only a thin diffusion layer consisting mainly of Ag3Al occurred al lhe Al/Ag interface.The tensile lap shear strength first increased,reached its peak value,and then decreased with increasing welding energy.The shear strength achieved in the present study was〜31%higher than that of the joint without interlayer.Interfacial failure occurred at all energy levels,with Ag foil particles or fragments being stuck on both Mg and Al sides due to its intense interaction with Mg and Al via accelerated diffusion during USW.The results obtained pave the way for the challenging dissimilar welding between Mg and Al alloys.
基金support from Natural Science and Engineering Research Council of Canada(NSERC),University of Tehran and Tarbiat Modares University
文摘TiNi alloy has a high resistance to wear and could be an excellent candidate for various tribological applications. But studies show that oxygen active elements can improve properties of some alloys, markedly. Yttrium is one of the oxygen active elements. In this paper, the effects of yttria addition on properties of TiNi have been studied via micro-indentation, hardness, wear and corrosive wear tests. It is demonstrated that by addition of yttria to 5%, TiNi alloy can own improved mechanical properties and resistance to wear and corrosive wear.
基金The simulations were performed on the Qilin-2 supercomputer at Zhejiang University.This work was supported by the Science Challenge Project(No.TZ2016005)the National Natural Science Foundation of China(Grant Nos.119210067,11605269,11721091,11775144)the National Grand Instrument Project(Nos.2019YFF01014400,2019YFF01014404).
文摘We report systematic studies of laser-driven proton beams produced with micrometer-thick solid targets made of aluminum and plastic,respectively.Distinct effects of the target materials are found on the total charge,cutoff energy,and beam spot of protons in the experiments,and these are described well by two-dimensional particle-in-cell simulations incorporating intrinsic material properties.It is found that with a laser intensity of 8×10^(19) W/cm^(2),target normal sheath acceleration is the dominant mechanism for both types of target.For a plastic target,the higher charge and cutoff energy of the protons are due to the greater energy coupling efficiencies from the intense laser beams,and the larger divergence angle of the protons is due to the deflection of hot electrons during transport in the targets.We also find that the energy loss of hot electrons in targets of different thickness has a significant effect on the proton cutoff energy.The consistent results obtained here further narrow the gap between simulations and experiments.
基金supported by the National Key R&D Program of China under Contract No.2022YFA1602200the International Partnership Program of the Chineses Academy of Sciences under Grant No.211134KYSB20200057the STCF Key Technology Research and Development Project.
文摘The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or higher.The STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard Model.The STCF project in China is under development with an extensive R&D program.This document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&D and physics case studies.
基金the Natural Sciences and Engineering Research Council of Canada (NSERC)the AUTO21 Network of Centres of Excellence for providing financial support+10 种基金financial support by the Premier’s Research Excellence Award (PREA)NSERC-Discovery Accelerator Supplement (DAS) AwardAutomotive Partnership Canada (APC)Canada Foundation for Innovation (CFI)Ryerson Research Chair (RRC) programthe Ministry of Science and Technology of the People’s Republic of China (2014DFG52810)the National Great Theoretic Research Project of China (2013CB632200)the National Natural Science Foundation of China (Project 51474043)Ministry of Education of the People’s Republic of China (SRFDR 20130191110018)Chongqing Municipal Government (CSTC2013JCYJC60001)Chongqing Science and Technology Commission (CSTC2011gjhz50001) for their financial supports
文摘The aim of this study was to evaluate the strain hardening and hot deformation behavior of asextruded Mg-Zn-Mn （ZM31） magnesium alloy with varying Y contents （0.3, 3.2, and 6 wt%） via compression testing along the extrusion direction at room temperature, 200℃ and 300 ℃. Texture and phases were identified by X-ray diffraction. Alloy ZM31 ＋ 0.3Y consisted of a mixture of fine equiaxed grains and elon- gated grains with 1-phase （Mg3YZno）; alloy ZM31 ＋ 3.2Y contained 1-phase and W-phase （Mg3Y2Zn3）; alloy ZM31 ＋ 6Y had long-period stacking-ordered （LPSO） X-phase （Mg12YZn） and Mg24Y5 particles. With increasing Y content the basal texture became weakened significantly. While alloys ZM31 ＋ 0.3Y and ZM31 ＋ 3.2Y exhibited a skewed true stress-true stain curve with a three-stage strain hardening feature caused by the occurrence of {1072} extension twinning, the true stress-true stain curve of alloy ZM31 ＋ 6Y was normal due to the dislocation slip during compression. With increasing temperature the extent of skewness decreased. While the compressive yield stress, ultimate compressive stress, strain hardening exponent, and hardening capacity all decreased as the temperature increased, the retention of the high- temperature deformation resistance increased with increasing Y content mainly due to the presence of thermally-stable LPSO X-ohase.
基金financial support from the Natural Science and Engineering Research Council of CanadaCamber Technology Corporation+3 种基金Suncor Energy Inc.Shell Canada Ltd.Magna International Inc.Volant Products Inc.
文摘Fracture toughness determines materials＇ resistance to fracture, which is measured often using impact or bending tests. However, it is difficult to evaluate fracture toughness of coatings and small samples.In this article, using white irons as sample materials, we explore a possible approach of using electron work function（EWF） as an indicator in evaluating fracture toughness of hard metallic materials. This parameter is promising for being utilized to analyze toughness of protective coatings and small objects as well as bulk materials. Through comparison with results obtained from impact tests and elastic modulus measurement, effectiveness of this EWF approach is demonstrated.
