Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)holds great promise in green energy conversion and storage.However,for current CO_(2) electrolyzers that rely on the oxygen evolution reaction,a large portion of the...Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)holds great promise in green energy conversion and storage.However,for current CO_(2) electrolyzers that rely on the oxygen evolution reaction,a large portion of the input energy is"wasted"at the anode due to the high overpotential requirement and the recovery of low-value oxygen.To make efficient use of the electricity during electrolysis,coupling CO_(2)RR with anodic alternatives that have low energy demands and/or profitable returns with high-value products is then promising.Herein,we review the latest advances in paired systems for simultaneous CO_(2) reduction and anode valorization.We start with the cases integrating CO_(2)RR with concurrent alternative oxidation,such as inorganic oxidation using chloride,sulfide,ammonia and urea,and organic oxidation using alcohols,aldehydes and primary amines.The paired systems that couple CO_(2)RR with on-site oxidative upgrading of CO_(2)-reduced chemicals are also introduced.The coupling mechanism,electrochemical performance and economic viability of these co-electrolysis systems are discussed.Thereby,we then point out the mismatch issues between the cathodic and anodic reactions regrading catalyst ability,electrolyte solution and reactant supply that will challenge the applications of these paired electrolysis systems.Opportunities to address these issues are further proposed,providing some guidance for future research.展开更多
Fe-Al-Ta eutectic composites with solidification rates of 6,20,30,80 and 200μm/s were obtained by a modified Bridgman directional solidification technique and alloying.Moreover,tensile property and fracture behavior ...Fe-Al-Ta eutectic composites with solidification rates of 6,20,30,80 and 200μm/s were obtained by a modified Bridgman directional solidification technique and alloying.Moreover,tensile property and fracture behavior of Fe-Al-Ta eutectic composites were studied at 600℃.The relationship between mechanical property and microstructure at high temperature was studied.Microstructure of Fe-Al-Ta eutectic is composed of Fe_(2)Ta(Al)Laves phase and Fe(Al,Ta)matrix phase.In addition,the tensile strength at high temperatures is higher than that at room temperature.The tensile strength is increased with the increase of solidification rate.Moreover,fracture morphology transforms from cleavage fracture to dimple fracture as the solidification rate is increased at high temperatures.展开更多
基于STT封底和全自动FCAW-G填充盖面焊接,开发了一种适用于双层海管外管全自动焊工艺,通过宏观形貌观察、力学性能测试等手段验证自动焊工艺下的海管焊接接头的可靠性,满足DNV OS F101:2017《海底管线系统》标准要求,可应用于X65碳素钢...基于STT封底和全自动FCAW-G填充盖面焊接,开发了一种适用于双层海管外管全自动焊工艺,通过宏观形貌观察、力学性能测试等手段验证自动焊工艺下的海管焊接接头的可靠性,满足DNV OS F101:2017《海底管线系统》标准要求,可应用于X65碳素钢海管外管的焊接施工。展开更多
This study aimed to investigate the pollution characteristics, source apportionment, and health risks associated with trace metal(loid)s(TMs) in the major agricultural producing areas in Chongqing, China. We analyzed ...This study aimed to investigate the pollution characteristics, source apportionment, and health risks associated with trace metal(loid)s(TMs) in the major agricultural producing areas in Chongqing, China. We analyzed the source apportionment and assessed the health risk of TMs in agricultural soils by using positive matrix factorization(PMF) model and health risk assessment(HRA) model based on Monte Carlo simulation. Meanwhile, we combined PMF and HRA models to explore the health risks of TMs in agricultural soils by different pollution sources to determine the priority control factors. Results showed that the average contents of cadmium(Cd), arsenic (As), lead(Pb), chromium(Cr), copper(Cu), nickel(Ni), and zinc(Zn) in the soil were found to be 0.26, 5.93, 27.14, 61.32, 23.81, 32.45, and 78.65 mg/kg, respectively. Spatial analysis and source apportionment analysis revealed that urban and industrial sources, agricultural sources, and natural sources accounted for 33.0%, 27.7%, and 39.3% of TM accumulation in the soil, respectively. In the HRA model based on Monte Carlo simulation, noncarcinogenic risks were deemed negligible(hazard index <1), the carcinogenic risks were at acceptable level(10^(-6)<total carcinogenic risk ≤ 10^(-4)), with higher risks observed for children compared to adults. The relationship between TMs, their sources, and health risks indicated that urban and industrial sources were primarily associated with As, contributing to 75.1% of carcinogenic risks and 55.7% of non-carcinogenic risks, making them the primary control factors. Meanwhile, agricultural sources were primarily linked to Cd and Pb, contributing to 13.1% of carcinogenic risks and 21.8% of non-carcinogenic risks, designating them as secondary control factors.展开更多
基金financially supported by the National Natural Science Foundation of China(22002084,22072081)the China Postdoctoral Science Foundation(2020M683420)+1 种基金the Fundamental Research Funds for the Central Universities(GK202103111)the 111 Project(B21005)。
文摘Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)holds great promise in green energy conversion and storage.However,for current CO_(2) electrolyzers that rely on the oxygen evolution reaction,a large portion of the input energy is"wasted"at the anode due to the high overpotential requirement and the recovery of low-value oxygen.To make efficient use of the electricity during electrolysis,coupling CO_(2)RR with anodic alternatives that have low energy demands and/or profitable returns with high-value products is then promising.Herein,we review the latest advances in paired systems for simultaneous CO_(2) reduction and anode valorization.We start with the cases integrating CO_(2)RR with concurrent alternative oxidation,such as inorganic oxidation using chloride,sulfide,ammonia and urea,and organic oxidation using alcohols,aldehydes and primary amines.The paired systems that couple CO_(2)RR with on-site oxidative upgrading of CO_(2)-reduced chemicals are also introduced.The coupling mechanism,electrochemical performance and economic viability of these co-electrolysis systems are discussed.Thereby,we then point out the mismatch issues between the cathodic and anodic reactions regrading catalyst ability,electrolyte solution and reactant supply that will challenge the applications of these paired electrolysis systems.Opportunities to address these issues are further proposed,providing some guidance for future research.
基金Funded by National Natural Science Foundation of China(No.51201121)Key Industry Innovation Chain(group)Project of Shaanxi Province(No.2019ZDLGY 04-04)+1 种基金International Cooperation Project of Key R&D Program in Shaanxi Province(No.2020KW-033)Industrialization Project of Shaanxi Provincial Department of Education(No.20JC024)
文摘Fe-Al-Ta eutectic composites with solidification rates of 6,20,30,80 and 200μm/s were obtained by a modified Bridgman directional solidification technique and alloying.Moreover,tensile property and fracture behavior of Fe-Al-Ta eutectic composites were studied at 600℃.The relationship between mechanical property and microstructure at high temperature was studied.Microstructure of Fe-Al-Ta eutectic is composed of Fe_(2)Ta(Al)Laves phase and Fe(Al,Ta)matrix phase.In addition,the tensile strength at high temperatures is higher than that at room temperature.The tensile strength is increased with the increase of solidification rate.Moreover,fracture morphology transforms from cleavage fracture to dimple fracture as the solidification rate is increased at high temperatures.
基金supported by Project of Chongqing Science and Technology Bureau (cstc2022jxjl0005)。
文摘This study aimed to investigate the pollution characteristics, source apportionment, and health risks associated with trace metal(loid)s(TMs) in the major agricultural producing areas in Chongqing, China. We analyzed the source apportionment and assessed the health risk of TMs in agricultural soils by using positive matrix factorization(PMF) model and health risk assessment(HRA) model based on Monte Carlo simulation. Meanwhile, we combined PMF and HRA models to explore the health risks of TMs in agricultural soils by different pollution sources to determine the priority control factors. Results showed that the average contents of cadmium(Cd), arsenic (As), lead(Pb), chromium(Cr), copper(Cu), nickel(Ni), and zinc(Zn) in the soil were found to be 0.26, 5.93, 27.14, 61.32, 23.81, 32.45, and 78.65 mg/kg, respectively. Spatial analysis and source apportionment analysis revealed that urban and industrial sources, agricultural sources, and natural sources accounted for 33.0%, 27.7%, and 39.3% of TM accumulation in the soil, respectively. In the HRA model based on Monte Carlo simulation, noncarcinogenic risks were deemed negligible(hazard index <1), the carcinogenic risks were at acceptable level(10^(-6)<total carcinogenic risk ≤ 10^(-4)), with higher risks observed for children compared to adults. The relationship between TMs, their sources, and health risks indicated that urban and industrial sources were primarily associated with As, contributing to 75.1% of carcinogenic risks and 55.7% of non-carcinogenic risks, making them the primary control factors. Meanwhile, agricultural sources were primarily linked to Cd and Pb, contributing to 13.1% of carcinogenic risks and 21.8% of non-carcinogenic risks, designating them as secondary control factors.