In this paper,higher order modes(HOMs) and loss factor of a new type of 500-MHz superconducting cavity is studied,by simulating its broadband HOMs damping at different positions of the ferrite HOM-absorber and differe...In this paper,higher order modes(HOMs) and loss factor of a new type of 500-MHz superconducting cavity is studied,by simulating its broadband HOMs damping at different positions of the ferrite HOM-absorber and different lengths of the ferrite.The results show that the impedance and Q value of the HOMs in transverse and longitudinal modes could be greatly reduced.The HOM longitudinal impedance could be damped to meet the requirement of SSRF beam instability threshold.The calculated loss factor of the new SC cavity was compared with cavities at SSRF.It was estimated that the HOM absorber could absorb a total power of 3.16 kW at 4-mm beam bunch length.展开更多
In this paper we report the design and realization of beam trip diagnostic system at Shanghai Synchrotron Radiation Facility (SSRF). The system can find out the first fault signal in the key operation signals related ...In this paper we report the design and realization of beam trip diagnostic system at Shanghai Synchrotron Radiation Facility (SSRF). The system can find out the first fault signal in the key operation signals related to the RF system by analyzing the time sequence, also it can decide which trips occurs first among the three superconducting RF stations. All the states of monitored signals in a time period ahead and behind beam trip are recorded. The results are compared with those from other diagnostic tools at SSRF. The work is of help in improving reliability of the superconducting RF system and stability of the storage ring operation.展开更多
With the potential application of Energy Recovery Linac (ERL), the superconducting (SC) cavities were developed to deliver much higher current than before. Nowadays, the current of the international SC accelerator des...With the potential application of Energy Recovery Linac (ERL), the superconducting (SC) cavities were developed to deliver much higher current than before. Nowadays, the current of the international SC accelerator designed has already exceeded 100 mA. This paper presents the design of a new 500 MHz 5-cell SC cavity (SINAP 5-cell cavity), in which the parameters r/Q= 515.5 of the fundamental mode and the geometry factor G=275.8 are under an acceptable Radio Frequency (RF) field level (B peak /E acc =4.31 mT/MV/m and E peak /E acc =2.48). This design employs a larger beam pipe to propagate the Higher Order Modes (HOMs) out of the cavity and increases the damping efficiently for the dangerous HOMs. By simulation technique, it has been found that almost all the dangerous HOMs (including TE 111 , TM 110 , and TM 011 ) can be propagated into the beam pipe and are absorbed by ferrite absorbers, when the beam pile is enlarged. Finally, the loss factor for the new 5-cell cavity is also calculated.展开更多
Superconducting cavities have been adopted in many kinds of accelerator facilities such as synchrotron radiation light source, hard X-ray free electron laser linac, colliders and energy recovery linacs (ERL). The 500 ...Superconducting cavities have been adopted in many kinds of accelerator facilities such as synchrotron radiation light source, hard X-ray free electron laser linac, colliders and energy recovery linacs (ERL). The 500 MHz superconducting cavities will be a candidate to be installed in the high current accelerators and high current ERLs for their large beam aperture, low higher order modes impedance and high current threshold value. This paper presents great progress in the whole sequence of developing 500 MHz superconducting cavity in China. It describes the first in-house successful development of 500 MHz single cell superconducting cavity including the deep-drawing of niobium half cells, electron beam wielding of cavity, surface preparations and vertical testing. The highest accelerating gradient of the fabricated cavity #SCD-02 higher than 10 MV/m was obtained while the quality factor was better than 4×108 at 4.2 K, which has reached the world level of the same kind of cavities.展开更多
文摘In this paper,higher order modes(HOMs) and loss factor of a new type of 500-MHz superconducting cavity is studied,by simulating its broadband HOMs damping at different positions of the ferrite HOM-absorber and different lengths of the ferrite.The results show that the impedance and Q value of the HOMs in transverse and longitudinal modes could be greatly reduced.The HOM longitudinal impedance could be damped to meet the requirement of SSRF beam instability threshold.The calculated loss factor of the new SC cavity was compared with cavities at SSRF.It was estimated that the HOM absorber could absorb a total power of 3.16 kW at 4-mm beam bunch length.
文摘In this paper we report the design and realization of beam trip diagnostic system at Shanghai Synchrotron Radiation Facility (SSRF). The system can find out the first fault signal in the key operation signals related to the RF system by analyzing the time sequence, also it can decide which trips occurs first among the three superconducting RF stations. All the states of monitored signals in a time period ahead and behind beam trip are recorded. The results are compared with those from other diagnostic tools at SSRF. The work is of help in improving reliability of the superconducting RF system and stability of the storage ring operation.
基金Supported by Research on HOM damping for 500MHz 5cell superconducting rf cavity
文摘With the potential application of Energy Recovery Linac (ERL), the superconducting (SC) cavities were developed to deliver much higher current than before. Nowadays, the current of the international SC accelerator designed has already exceeded 100 mA. This paper presents the design of a new 500 MHz 5-cell SC cavity (SINAP 5-cell cavity), in which the parameters r/Q= 515.5 of the fundamental mode and the geometry factor G=275.8 are under an acceptable Radio Frequency (RF) field level (B peak /E acc =4.31 mT/MV/m and E peak /E acc =2.48). This design employs a larger beam pipe to propagate the Higher Order Modes (HOMs) out of the cavity and increases the damping efficiently for the dangerous HOMs. By simulation technique, it has been found that almost all the dangerous HOMs (including TE 111 , TM 110 , and TM 011 ) can be propagated into the beam pipe and are absorbed by ferrite absorbers, when the beam pile is enlarged. Finally, the loss factor for the new 5-cell cavity is also calculated.
文摘Superconducting cavities have been adopted in many kinds of accelerator facilities such as synchrotron radiation light source, hard X-ray free electron laser linac, colliders and energy recovery linacs (ERL). The 500 MHz superconducting cavities will be a candidate to be installed in the high current accelerators and high current ERLs for their large beam aperture, low higher order modes impedance and high current threshold value. This paper presents great progress in the whole sequence of developing 500 MHz superconducting cavity in China. It describes the first in-house successful development of 500 MHz single cell superconducting cavity including the deep-drawing of niobium half cells, electron beam wielding of cavity, surface preparations and vertical testing. The highest accelerating gradient of the fabricated cavity #SCD-02 higher than 10 MV/m was obtained while the quality factor was better than 4×108 at 4.2 K, which has reached the world level of the same kind of cavities.
