High-precision localization technology is attracting widespread attention in harsh indoor environments.In this paper,we present a fingerprint localization and tracking system to estimate the locations of the tag based...High-precision localization technology is attracting widespread attention in harsh indoor environments.In this paper,we present a fingerprint localization and tracking system to estimate the locations of the tag based on a deep belief network(DBN).In this system,we propose using coefficients as fingerprints to combine the ultra-wideband(UWB)and inertial measurement unit(IMU)estimation linearly,termed as a HUID system.In particular,the fingerprints are trained by a DBN and estimated by a radial basis function(RBF).However,UWB-based estimation via a trilateral method is severely affected by the non-line-of-sight(NLoS)problem,which limits the localization precision.To tackle this problem,we adopt the random forest classifier to identify line-of-sight(LoS)and NLoS conditions.Then,we adopt the random forest regressor to mitigate ranging errors based on the identification results for improving UWB localization precision.The experimental results show that the mean square error(MSE)of the localization error for the proposed HUID system reduces by 12.96%,50.16%,and 64.92%compared with that of the existing extended Kalman filter(EKF),single UWB,and single IMU estimation methods,respectively.展开更多
Based on the advantages of the application of Building Information Modelling(BIM)technology in highway engineering,this paper analyzes the difficulties of its in-depth application,grasps the pain points of the applica...Based on the advantages of the application of Building Information Modelling(BIM)technology in highway engineering,this paper analyzes the difficulties of its in-depth application,grasps the pain points of the application of BIM technology in practice,and approaches from the integration of BIM design-construction.This paper also puts forward the integration of cross-stage information based on the BIM+Geographic Information System(GIS)construction information management system to realize the BIM whole life cycle management,and provides directional support for the continuous and efficient application of BIM technology in engineering practice.展开更多
The aim of this study was to develop and examine the morphology and distribution of mercury (Hg) in flue gas desulfurization (FGD) by-product.</span></span><span><span><span style="font...The aim of this study was to develop and examine the morphology and distribution of mercury (Hg) in flue gas desulfurization (FGD) by-product.</span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">Mercury in the coal of coal-fired power plants is concentrated in the by-products of desulfurization process, and it is widely used as an additive in cement, building materials and other industries. Due to the different stability of various forms of mercury in the environment, subsequent use of products containing desulfurization by-product additives will continue to be released into the environment, endangering human health. Therefore, it is very necessary to study the form and distribution of mercury in the by-products of desulfurization in coal-fired power plants to provide a theoretical basis for subsequent harmless treatment.</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">For content and morphology of mercury analysis, 1 sample of dry FGD ash and 6 samples of wet FGD gypsum were analyzed. The total 7 samples were extracted using a modification of sequential chemical extractions (SCE) method, which was employed for the partitioning Hg into four fractions: water soluble, acid soluble, H<sub>2</sub>O<sub>2</sub> soluble, and residual. The Hg analysis was done with United States Environmental Protection Agency (USEPA) method</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">7471B. Comparing with the wet FGD gypsums of coal-fired boilers, the total Hg content in the dry FGD by-product was as high as</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">1.22 mg/kg, while the total Hg content in the FGD gypsum is 0.23</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">-</span></span></span><span><span><span style="font-family:""> </span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;">0.74 mg/kg, which was 2 times over the wet FGD gypsum. The concentration of water soluble Hg in the dry FGD by-product was the highest amount (0.72 mg/kg), accounting for 59.02% of the total mercury. While residual Hg content was 0.16 mg/kg, only about 13.11% of the total mercury. Mercury content in FGD gypsum was expressed in the form of <i></span><i><span style="font-family:Verdana;">ρ</span></i><span style="font-family:Verdana;"></i></span></span></span></span><span><span><i><span style="font-family:""> </span></i></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">(residual Hg) ></span></span></span><span><span><span style="font-family:""> </span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;"><i></span><i><span style="font-family:Verdana;">ρ</span></i><span style="font-family:Verdana;"></i></span></span></span></span><span><span><i><span style="font-family:""> </span></i></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;">(H</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">O</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;"> soluble Hg)</span></span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">></span></span></span><span><span><span style="font-family:""> </span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;"><i></span><i><span style="font-family:Verdana;">ρ</span></i><span style="font-family:Verdana;"></i></span></span></span></span><span><span><i><span style="font-family:""> </span></i></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">(water soluble Hg)</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">></span></span></span><span><span><span style="font-family:""> </span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;"><i></span><i><span style="font-family:Verdana;">ρ</span></i><span style="font-family:Verdana;"></i></span></span></span></span><span><span><i><span style="font-family:""> </span></i></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">(acid soluble Hg). The morphology and distribution of mercury in FGD by-products is supposed to be analyzed before utilization, and the impact of mercury on the environment should be considered.展开更多
COVID-19 (COVID-19) or COVID-19 is pneumonia caused by the novel coronavirus infection in patients in 2019. COVID-19 pneumonia epidemic is widespread, wide, and deep. To effectively combat the further spread of COVID-...COVID-19 (COVID-19) or COVID-19 is pneumonia caused by the novel coronavirus infection in patients in 2019. COVID-19 pneumonia epidemic is widespread, wide, and deep. To effectively combat the further spread of COVID-19: the overall protocol of the hospital: “three lines of defense” of community prevention and control, fever clinic and face-to-face treatment;grasp the good three-time limits: “2 hours, 12 hours and 24 hours”;do a good job of three key points: key areas and places and groups;carry out four early prevention and control measures: early detection, early reporting, early isolation and early treatment;management of confirmed, suspected, fever, close contact “four types of personnel”;implement l responsibility system;doing all receivable, should be treated, should be checked, should be separated by “four should be”;do investigation, control, supervision, education, and care “five in place”. Through the above methods, the People’s Hospital of Pingchang County has effectively controlled COVID-19.展开更多
Background: The treatment of Hp infection has been the most popular topic of the most attention and research by gastrointestinal disease workers, and the biggest problem in the treatment of Hp infection is Hp drug res...Background: The treatment of Hp infection has been the most popular topic of the most attention and research by gastrointestinal disease workers, and the biggest problem in the treatment of Hp infection is Hp drug resistance to antibiotics, and Hp drug resistance is the main cause of Hp eradication failure. It is severe for the multidrug resistance of Hp. Objective: To investigate the changing trend of Helicobacter pylori (Hp) resistance to metronidazole, clarithromycin and amoxicillin in children and adults in Chengdu. Methods: The Hp strain determined the minimum antibacterial concentration (MIC) from 585 patients with upper gastrointestinal symptoms, metronidazole, clarithromycin and amoxicillin was measured by the E-test. Clinically isolated Hp strains were obtained by microaerobic condition culture as the diagnostic standard. Results: The Hp resistance to metronidazole and clarithromycin in children in Chengdu were: 17.65% (27/153) and 18.06 (78/432) in adults. The Hp resistance to metronidazole and amoxicillin in children in Chengdu were: 11.76% (18/153) and 13.19 (57/432) in adults. The Hp resistance to metronidazole, clarithromycin and amoxicillin in children in Chengdu were: 3.92% (6/153) and 10.41 (45/432) in adults. There were 76.92% of the strains which were resistant to metronidazole, 24.11% to clarithromycin, and 18.46% to amoxicillin. The drug resistance rate of Hp has increased year by year from 2017 to 2021 year, especially the drug resistance rate of Hp to clarithromycin and metronidazole has generally increased. Conclusions: The drug resistance rate of Hp has increased year by year from 2017 to 2021 year.展开更多
In this study,to prepare a series of activated carbon-supported metals for the catalytic reduction of NO_x to N_2 in excess O_2,activated carbons derived from lignocellulosic and herbaceous biomasses were selected as ...In this study,to prepare a series of activated carbon-supported metals for the catalytic reduction of NO_x to N_2 in excess O_2,activated carbons derived from lignocellulosic and herbaceous biomasses were selected as the reducing agents,and alkali and transition metals were used as the catalytic active phases.The effects of the type of biomass,carbonization temperature and catalyst composition on NO_x reduction efficiency were analyzed in a fixed-bed flow reactor.The results showed that two temperature regimes are present for the NO_x-carbon reaction:at temperatures below 250°C,the NO_x adsorption process on the carbon surface was predominant,whereas true NO_x reduction by carbon occurred at temperatures above 250°C,producing N_2,CO_2 and CO.The influence of the carbonization temperature on carbon reactivity depended on the effect of the carbonization temperature on the carbon surface area and the reduction of the metal species on carbon.All studied metals catalyzed both NO_xand O_2reduction by carbon,and potassium could strongly enhance the C-NO_x reaction without substantial carbon consumption by O_2.Moreover,the potassium supported by sawdust-derived activated carbon exhibited higher selectivity and capacity towards NO_x reduction than did its previously reported coal-derived counterparts.These properties were ascribed to the high dispersion of the active potassium species on the carbon surface,as observed through the comparison of X-ray photoelectron spectroscopy and powder X-ray diffraction results for the carbons made from biomass and coal-based precursors.展开更多
Litter phosphorus(P) return is important to maintain the P cycle and balance in the sandy land of arid areas.In this study,we determined the loss and return of litter P in sand dune areas and elucidated their relation...Litter phosphorus(P) return is important to maintain the P cycle and balance in the sandy land of arid areas.In this study,we determined the loss and return of litter P in sand dune areas and elucidated their relationship.We investigated litter production and litter P amount,and simulated leaf litter moving dynamics to understand the relationships between the loss of litter P and the total litter P,and between the return of litter P and the total litter P in active(AD),semi-stabilized(SSD) and stabilized(SD) dunes in Inner Mongolia,northeastern China.The vegetation litter P was 12.6,94.5,and 201.6 mg P/m2 in AD,SSD,and SD,respectively.A significant movement and loss of leaf litter P with time occurred on the three types of sand dunes.As a result,the loss of P was 7.4,46.9,and 69.8 mg P/m2 and the return of P was 5.5,47.6,and 131.8 mg P/m2 in AD,SSD,and SD,respectively.The relationship between both loss and return of P and total litter P in AD,SSD,and SD was revealed by linear regression.The slope of the regression line indicated the rate of loss or return of litter P.From AD to SD,the loss rate showed a declining slope(0.52,0.32,and 0.17 for AD,SSD,and SD,respectively),and the return rate showed a rising slope(0.48,0.67,and 0.83 for AD,SSD,and SD,respectively).The loss of litter P should be regarded in the local management of vegetation and land in sand dune areas.Improved vegetation restoration measures are necessary to decrease litter P loss to maintain the stability of ecosystems in sand dune areas.展开更多
Few studies have specifically focused on the validation and spatiotemporal distribution of planetary boundary layer height(PBLH) and relative humidity(RH) data in China. In this analysis, continuous PBLH and surface-l...Few studies have specifically focused on the validation and spatiotemporal distribution of planetary boundary layer height(PBLH) and relative humidity(RH) data in China. In this analysis, continuous PBLH and surface-level RH data simulated from GEOS-5 between 2004 and 2012, were validated against ground-based observations. Overall, the simulated RH was consistent with the statistical data from meteorological stations, with a correlation coefficient of 0.78 and a slope of 0.9. However, the simulated PBLH was underestimated compared to LIDAR data by a factor of approximately two,which was primarily because of poor simulation in late summer and early autumn. We further examined the spatiotemporal distribution characteristics of two factors in four regions—North China, South China, Northwest China, and the Tibetan Plateau. The results showed that the annual PBLH trends in all regions were fairly moderate but sensitive to solar radiation and precipitation, which explains why the PBLH values were ranked in order from largest to smallest as follows: Tibetan Plateau, Northwest China, North China, and South China. Strong seasonal variation of the PBLH exhibited high values in summer and low values in winter, which was also consistent with the turbulent vertical exchange. Not surprisingly, the highest RH in South China and the lowest RH in desert areas of Northwest China(less than 30%). Seasonally, South China exhibited little variation, whereas Northwest China exhibited its highest humidity in winter and lowest humidity in spring,the maximum values in the other regions were obtained from July to September.展开更多
Response surface methodology(RSM) was employed to optimize the control parameters of TiO_2/graphene with exposed {001} facets during synthesis, and its enhanced photocatalytic activities were evaluated in the photodeg...Response surface methodology(RSM) was employed to optimize the control parameters of TiO_2/graphene with exposed {001} facets during synthesis, and its enhanced photocatalytic activities were evaluated in the photodegradation of toluene. Experimental results were in good agreement with the predicted results obtained using RSM with a correlation coefficient(R^2) of 0.9345. When 22.06 mg of graphite oxide(GO) and 2.09 mL of hydrofluoric acid(HF) were added and a hydrothermal time of 28 h was used, a maximum efficiency in the degradation of toluene was achieved. X-ray diffraction(XRD), transmission electron microscopy(TEM), and scanning electron microscopy(SEM) were employed to characterize the obtained hybrid photocatalyst. The electron transferred between Ti and C retarded the combination of electron–hole pairs and hastened the transferring of electrons, which enhanced the photocatalytic activity.展开更多
Objective: To compare the efficacy and safety of Lobaplatin plus Etoposide (EL) and Cisplatin plus Etoposide (EP) regimens in chemonaive with extensive-stage small-cell lung cancer (SCLC). Methods: Between July 2010 a...Objective: To compare the efficacy and safety of Lobaplatin plus Etoposide (EL) and Cisplatin plus Etoposide (EP) regimens in chemonaive with extensive-stage small-cell lung cancer (SCLC). Methods: Between July 2010 and July 2011, a total of 62 patients with extensive-stage small-cell lung cancer who received initial treatment in our hospital and 309 hospital of PLA. 31 patients were randomly assigned to the EL Group: Lobaplatin was given intravenously at a dose of 30 mg/m2 on day 1 and Etoposide 100 mg/m2 on days 1 to 3 of 21-day cycles for a maximum of six cycles. Another 31 patients were assigned to the EP Group: Cisplatin was given intravenously at a dose of 75 mg/m2 on day 1 and Etoposide 100 mg/m2 on days 1 to 3 of 21-day cycles for a maximum of six cycles. We evaluated the efficacy, overall response rate (ORR), disease control rate (DCR), the progression-free survival (PFS) and toxicity between the patients of the two groups. Results: All 62 patients were eligible. In the EL group, 2 (6.5%) patients had complete response, 20 (64.5%) patients had partial response, 5 (16.1%) patients had stable disease and 4 (12.9%) patients had progress disease. In the EP group, 2 (6.5%) patients had complete response, 22 (70.9%) patients had partial response, 4 (12.9%) patients had stable disease and 3 (9.7%) patients had progress disease. The ORR of EL and EP group were 70.9% and 77.4%, respectively, showing no significant difference (P = 0.562). The DCR of both groups were 87% and 90%, respectively, showing no significant difference (P = 0.688). Median PFS of patients with EL and EP regimens were 5.5 months and 5 months, respectively, showing no significant difference (P = 0.637). Adverse events were observed in all 62 patients. Grade 1 to 4 anemia was higher in the EP group than in EL group, showing significant difference (P = 0.02). Grade 3 and 4 thrombocytopenia was seen in 4 patients (12.9%) in EL group and 1 patient (3.2%) in EP group. Although one patient had platelet transfusion owing to Grade 4 thrombocytopenia in EL group, no significant difference (P = 0.637) were shown. The incidence of nausea/vomiting was higher in the EP group than in the EL group (96.7% vs 51.6%, P = 0.00). Conclusion: The EL regimen is an effective and low-toxicity chemotherapy and no inferior to EP regimen in treatment response, therefore, EL regimen maybe is a good choice for patients with extensive-stage SCLC.展开更多
Generalized anxiety disorder(GAD)has harmful effects on physical and mental health and quality of life.Coloring therapy has been reported to have a positive effect on improving patient anxiety and depression.But there...Generalized anxiety disorder(GAD)has harmful effects on physical and mental health and quality of life.Coloring therapy has been reported to have a positive effect on improving patient anxiety and depression.But there are no reported clinical trials examining their effectiveness as a treatment for GAD.This study was planned to evaluate the effectiveness of coloring therapy combined with conventional therapy in improving anxiety,depression,and positive and negative emotions with GAD.This randomized controlled study comprising 88 GAD patients was selected for intervention in different wards.The control group(n=45)was given conventional antianxiety medication and physical therapy,and the experimental group(n=43)received coloring therapy combined with conventional therapy.The Self-Rating Depression Scale,Self-Rating Anxiety Scale(SAS),Hamilton Depression Scale,Hamilton Anxiety Scale(HAMA),and Positive and Negative Affect Scale were assessed in both groups before and 3 weeks after the intervention.After the intervention,there were statistical differences in intra-and inter-group comparisons of anxiety,depression,and positive and negative mood scales in the experimental and control groups(p<.05).The minus in anxiety/positive emotions pre-and postintervention in the experimental group was statistically significant compared to that in anxiety/positive emotions pre-and postintervention in the control group(HAMA:d=1.45,95%confidence interval[CI](0.34,2.57),p=.011;SAS:d=3.87,95%CI(1.73,6.00),p=.001;positive:d=1.76,95%CI(0.17,3.34),p=.030).The minus in depressive/negative emotions pre-and postintervention in the experimental group was not statistically significant compared with that in depressive/negative emotions pre-and postintervention in the control group(p>.05).For GAD patients,adding coloring therapy based on conventional drug therapy and physical therapy can not only reduce depression and negative emotions but also have better effects on reducing anxiety and improving positive emotions than conventional therapy.展开更多
Fifty-three larch interspecific hybrid clones(Larix kaempferi × L.gmelini) and their parent clones were used for growth curve analysis of height variations.The growth curves of the 55 clones were 'S'-shap...Fifty-three larch interspecific hybrid clones(Larix kaempferi × L.gmelini) and their parent clones were used for growth curve analysis of height variations.The growth curves of the 55 clones were 'S'-shaped and 36 exhibited similar curves as the male parent.The coefficients of the logistic models were higher than 0.943,indicating that our results were effective in the simulation of the growth curves.ANOVA analysis showed significant differences in height of different clones (P\0.01).Average date of maximum height growth was Day 173,and average duration of rapid growth lasted for 50 days.Annual average increase in height was 9.7cm d^(-1) and daily average increase was 0.2 cm.The ratio of GR to the total annual increase in height ranged from 51.2 to 68.8%,with the average being 59.8%.There was a positive correlation between k values and plant heights which benefited from the evaluation of early plant height.There was also a positive correlation between GR(growth stage),GD(plant height) and annual increase in height.These results are informative to the evaluation of the elite clone selection and provide a theoretical basis for breeding and management.展开更多
The crystal form of TiO_2 is a crucial focus of research on the photocatalytic degradation of gaseous pollutants by TiO_2-based composite photocatalysts. To explore the synergistic effect of mixed crystalline TiO_2 on...The crystal form of TiO_2 is a crucial focus of research on the photocatalytic degradation of gaseous pollutants by TiO_2-based composite photocatalysts. To explore the synergistic effect of mixed crystalline TiO_2 on gaseous organic-pollutant photocatalytic degradation, we synthesized a series of TiO_2 nanoparticles with controllable phase ratios. We explored the role of the TiO_2 phase ratio on the photocatalytic activity and degradation pathway in the photodegradation of 2-propanol(IPA). We estimated the crystallite size and crystal proportions of anatase and rutile by X-ray diffraction. We used the Brunauer-Emmett-Teller method to calculate the specific surface area and Fourier transform infrared spectroscopy to characterize the surface chemistry of the samples. Our results show the photocatalytic activities of pure anatase and the sample with 8.6% rutile to be much better than those of the samples with a phase junction and pure rutile. As such, anatase is the better option for the study of photodegradation design and preparation of gas-phase organic pollutants.展开更多
Li_(4)Ti_(5)O_(12)(LTO) anode material demonstrates superior cycling performance due to its stable spinel structure and high lithiation/de-lithiation potential.Herein,a novel energy-saving solid-phase synthesis route ...Li_(4)Ti_(5)O_(12)(LTO) anode material demonstrates superior cycling performance due to its stable spinel structure and high lithiation/de-lithiation potential.Herein,a novel energy-saving solid-phase synthesis route for LTO has been successfully designed,employing the cheap industrial intermediate product of metatitanic acid (HTO) as titanium source.Through the in-situ Fourier transform infrared spectroscopy (FTIR)and ex-situ X-ray diffraction (XRD),it is revealed for the first time that the amorphous crystal structure of HTO is more conducive for the Li+insertion,making it possible to prepare LTO at a relatively lower sintering temperature.Utilizing the dehydration carbonization reaction between glucose and sulfuric acid,an ingenious strategy of glucose pre-coating is adopted to avoid the generation of Li_(2)SO_(4) impurity caused by the residual sulfuric acid on the surface of HTO,which meanwhile enhances the conductivity and inhibits the particle growth of LTO.The obtained ALTO@C anode material consequently exhibits excellent electrochemical performance that 132.0 m Ah g^(-1)is remained even at 20 C,and ultra low decay rate of 0.015% per cycle is achieved during 1000 cycles at 2 C.Remarkably,LiCoO_(2)//ALTO@C full cell delivers conspicuous low-temperature property (130.7 m Ah g^(-1)at 0.5 C and almost no attenuation after 300 cycles under-20℃).展开更多
Oral inhalation of aerosolized drugs has be widely applied in healing the affected body organs including lesions of the throat and lungs and it is more effiicient than those conventional therapies,such as intravenous ...Oral inhalation of aerosolized drugs has be widely applied in healing the affected body organs including lesions of the throat and lungs and it is more effiicient than those conventional therapies,such as intravenous drip,intramuscular injection and external topical administration in the aspects of the dosage reduction and side effects of drugs.Never-theless,the traditional atomization devices always exhibit many drawbacks.For example,non-uniformed atomization particle distribution,the instability of transient atomization quantity and difficulties in precise energy control would seriously restrict an extensive use of atomization inhalation therapy.In this study,the principle of intra-hole fluctua-tion phenomenon occurred in the hole is fully explained,and the produced volume change is also estimated.Addi-tionally,the mathematical expression of the atomization rate of the atomizing device is well established.The mecha-nism of the micro-pump is further clarified,and the influence of the vibration characteristics of the atomizing film on the atomization behavior is analyzed theoretically.The curves of sweep frequency against the velocity and amplitude of the piezoelectric vibrator are obtained by the Doppler laser vibrometer,and the corresponding mode shapes of the resonance point are achieved.The influence of vibration characteristics on atomization rate,atomization height and atomization particle size are also verified by experiments,respectively.Both the experimental results and theoretical calculation are expected to provide a guidance for the design of this kind of atomization device in the future.展开更多
基金supported in part by the National Natural Science Foundation of China under Grant No.61771474in part by the Postgraduate Research&Practice Innovation Program of Jiangsu Province under Grant No.KYCX212243+2 种基金in part by the Young Talents of Xuzhou Science and Technology Plan Project under Grant No.KC19051in part by the Open Research Fund of National Mobile Communications Research Laboratory,Southeast University under Grant No.2021D02in part by the Open Fund of Information Photonics and Optical Communications (IPOC) (BUPT)。
文摘High-precision localization technology is attracting widespread attention in harsh indoor environments.In this paper,we present a fingerprint localization and tracking system to estimate the locations of the tag based on a deep belief network(DBN).In this system,we propose using coefficients as fingerprints to combine the ultra-wideband(UWB)and inertial measurement unit(IMU)estimation linearly,termed as a HUID system.In particular,the fingerprints are trained by a DBN and estimated by a radial basis function(RBF).However,UWB-based estimation via a trilateral method is severely affected by the non-line-of-sight(NLoS)problem,which limits the localization precision.To tackle this problem,we adopt the random forest classifier to identify line-of-sight(LoS)and NLoS conditions.Then,we adopt the random forest regressor to mitigate ranging errors based on the identification results for improving UWB localization precision.The experimental results show that the mean square error(MSE)of the localization error for the proposed HUID system reduces by 12.96%,50.16%,and 64.92%compared with that of the existing extended Kalman filter(EKF),single UWB,and single IMU estimation methods,respectively.
基金Chongqing Engineering Institute 2023 Intramural Research Fund Grant Project:Highway Engineering Construction Process Management and Technological Innovation Research Based on BIM Technology(Project number:2023xzky04)。
文摘Based on the advantages of the application of Building Information Modelling(BIM)technology in highway engineering,this paper analyzes the difficulties of its in-depth application,grasps the pain points of the application of BIM technology in practice,and approaches from the integration of BIM design-construction.This paper also puts forward the integration of cross-stage information based on the BIM+Geographic Information System(GIS)construction information management system to realize the BIM whole life cycle management,and provides directional support for the continuous and efficient application of BIM technology in engineering practice.
文摘The aim of this study was to develop and examine the morphology and distribution of mercury (Hg) in flue gas desulfurization (FGD) by-product.</span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">Mercury in the coal of coal-fired power plants is concentrated in the by-products of desulfurization process, and it is widely used as an additive in cement, building materials and other industries. Due to the different stability of various forms of mercury in the environment, subsequent use of products containing desulfurization by-product additives will continue to be released into the environment, endangering human health. Therefore, it is very necessary to study the form and distribution of mercury in the by-products of desulfurization in coal-fired power plants to provide a theoretical basis for subsequent harmless treatment.</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">For content and morphology of mercury analysis, 1 sample of dry FGD ash and 6 samples of wet FGD gypsum were analyzed. The total 7 samples were extracted using a modification of sequential chemical extractions (SCE) method, which was employed for the partitioning Hg into four fractions: water soluble, acid soluble, H<sub>2</sub>O<sub>2</sub> soluble, and residual. The Hg analysis was done with United States Environmental Protection Agency (USEPA) method</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">7471B. Comparing with the wet FGD gypsums of coal-fired boilers, the total Hg content in the dry FGD by-product was as high as</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">1.22 mg/kg, while the total Hg content in the FGD gypsum is 0.23</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">-</span></span></span><span><span><span style="font-family:""> </span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;">0.74 mg/kg, which was 2 times over the wet FGD gypsum. The concentration of water soluble Hg in the dry FGD by-product was the highest amount (0.72 mg/kg), accounting for 59.02% of the total mercury. While residual Hg content was 0.16 mg/kg, only about 13.11% of the total mercury. Mercury content in FGD gypsum was expressed in the form of <i></span><i><span style="font-family:Verdana;">ρ</span></i><span style="font-family:Verdana;"></i></span></span></span></span><span><span><i><span style="font-family:""> </span></i></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">(residual Hg) ></span></span></span><span><span><span style="font-family:""> </span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;"><i></span><i><span style="font-family:Verdana;">ρ</span></i><span style="font-family:Verdana;"></i></span></span></span></span><span><span><i><span style="font-family:""> </span></i></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;">(H</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">O</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;"> soluble Hg)</span></span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">></span></span></span><span><span><span style="font-family:""> </span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;"><i></span><i><span style="font-family:Verdana;">ρ</span></i><span style="font-family:Verdana;"></i></span></span></span></span><span><span><i><span style="font-family:""> </span></i></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">(water soluble Hg)</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">></span></span></span><span><span><span style="font-family:""> </span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;"><i></span><i><span style="font-family:Verdana;">ρ</span></i><span style="font-family:Verdana;"></i></span></span></span></span><span><span><i><span style="font-family:""> </span></i></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">(acid soluble Hg). The morphology and distribution of mercury in FGD by-products is supposed to be analyzed before utilization, and the impact of mercury on the environment should be considered.
文摘COVID-19 (COVID-19) or COVID-19 is pneumonia caused by the novel coronavirus infection in patients in 2019. COVID-19 pneumonia epidemic is widespread, wide, and deep. To effectively combat the further spread of COVID-19: the overall protocol of the hospital: “three lines of defense” of community prevention and control, fever clinic and face-to-face treatment;grasp the good three-time limits: “2 hours, 12 hours and 24 hours”;do a good job of three key points: key areas and places and groups;carry out four early prevention and control measures: early detection, early reporting, early isolation and early treatment;management of confirmed, suspected, fever, close contact “four types of personnel”;implement l responsibility system;doing all receivable, should be treated, should be checked, should be separated by “four should be”;do investigation, control, supervision, education, and care “five in place”. Through the above methods, the People’s Hospital of Pingchang County has effectively controlled COVID-19.
文摘Background: The treatment of Hp infection has been the most popular topic of the most attention and research by gastrointestinal disease workers, and the biggest problem in the treatment of Hp infection is Hp drug resistance to antibiotics, and Hp drug resistance is the main cause of Hp eradication failure. It is severe for the multidrug resistance of Hp. Objective: To investigate the changing trend of Helicobacter pylori (Hp) resistance to metronidazole, clarithromycin and amoxicillin in children and adults in Chengdu. Methods: The Hp strain determined the minimum antibacterial concentration (MIC) from 585 patients with upper gastrointestinal symptoms, metronidazole, clarithromycin and amoxicillin was measured by the E-test. Clinically isolated Hp strains were obtained by microaerobic condition culture as the diagnostic standard. Results: The Hp resistance to metronidazole and clarithromycin in children in Chengdu were: 17.65% (27/153) and 18.06 (78/432) in adults. The Hp resistance to metronidazole and amoxicillin in children in Chengdu were: 11.76% (18/153) and 13.19 (57/432) in adults. The Hp resistance to metronidazole, clarithromycin and amoxicillin in children in Chengdu were: 3.92% (6/153) and 10.41 (45/432) in adults. There were 76.92% of the strains which were resistant to metronidazole, 24.11% to clarithromycin, and 18.46% to amoxicillin. The drug resistance rate of Hp has increased year by year from 2017 to 2021 year, especially the drug resistance rate of Hp to clarithromycin and metronidazole has generally increased. Conclusions: The drug resistance rate of Hp has increased year by year from 2017 to 2021 year.
基金Supported by the National Natural Science Foundation of China(21507119)the Key Technology Research and Development Program of Qinghai Province(2012-J-144)the National High Technology Research and Development Program of China(2012AA06A11303)
文摘In this study,to prepare a series of activated carbon-supported metals for the catalytic reduction of NO_x to N_2 in excess O_2,activated carbons derived from lignocellulosic and herbaceous biomasses were selected as the reducing agents,and alkali and transition metals were used as the catalytic active phases.The effects of the type of biomass,carbonization temperature and catalyst composition on NO_x reduction efficiency were analyzed in a fixed-bed flow reactor.The results showed that two temperature regimes are present for the NO_x-carbon reaction:at temperatures below 250°C,the NO_x adsorption process on the carbon surface was predominant,whereas true NO_x reduction by carbon occurred at temperatures above 250°C,producing N_2,CO_2 and CO.The influence of the carbonization temperature on carbon reactivity depended on the effect of the carbonization temperature on the carbon surface area and the reduction of the metal species on carbon.All studied metals catalyzed both NO_xand O_2reduction by carbon,and potassium could strongly enhance the C-NO_x reaction without substantial carbon consumption by O_2.Moreover,the potassium supported by sawdust-derived activated carbon exhibited higher selectivity and capacity towards NO_x reduction than did its previously reported coal-derived counterparts.These properties were ascribed to the high dispersion of the active potassium species on the carbon surface,as observed through the comparison of X-ray photoelectron spectroscopy and powder X-ray diffraction results for the carbons made from biomass and coal-based precursors.
基金supported by the National Natural Science Foundation of China(30800163)
文摘Litter phosphorus(P) return is important to maintain the P cycle and balance in the sandy land of arid areas.In this study,we determined the loss and return of litter P in sand dune areas and elucidated their relationship.We investigated litter production and litter P amount,and simulated leaf litter moving dynamics to understand the relationships between the loss of litter P and the total litter P,and between the return of litter P and the total litter P in active(AD),semi-stabilized(SSD) and stabilized(SD) dunes in Inner Mongolia,northeastern China.The vegetation litter P was 12.6,94.5,and 201.6 mg P/m2 in AD,SSD,and SD,respectively.A significant movement and loss of leaf litter P with time occurred on the three types of sand dunes.As a result,the loss of P was 7.4,46.9,and 69.8 mg P/m2 and the return of P was 5.5,47.6,and 131.8 mg P/m2 in AD,SSD,and SD,respectively.The relationship between both loss and return of P and total litter P in AD,SSD,and SD was revealed by linear regression.The slope of the regression line indicated the rate of loss or return of litter P.From AD to SD,the loss rate showed a declining slope(0.52,0.32,and 0.17 for AD,SSD,and SD,respectively),and the return rate showed a rising slope(0.48,0.67,and 0.83 for AD,SSD,and SD,respectively).The loss of litter P should be regarded in the local management of vegetation and land in sand dune areas.Improved vegetation restoration measures are necessary to decrease litter P loss to maintain the stability of ecosystems in sand dune areas.
基金supported by the National Key R&D Program of China (2016YFC0201507)the National Natural Science Foundation of China (Grant Nos. 41471367, 91543128 and 41571417)
文摘Few studies have specifically focused on the validation and spatiotemporal distribution of planetary boundary layer height(PBLH) and relative humidity(RH) data in China. In this analysis, continuous PBLH and surface-level RH data simulated from GEOS-5 between 2004 and 2012, were validated against ground-based observations. Overall, the simulated RH was consistent with the statistical data from meteorological stations, with a correlation coefficient of 0.78 and a slope of 0.9. However, the simulated PBLH was underestimated compared to LIDAR data by a factor of approximately two,which was primarily because of poor simulation in late summer and early autumn. We further examined the spatiotemporal distribution characteristics of two factors in four regions—North China, South China, Northwest China, and the Tibetan Plateau. The results showed that the annual PBLH trends in all regions were fairly moderate but sensitive to solar radiation and precipitation, which explains why the PBLH values were ranked in order from largest to smallest as follows: Tibetan Plateau, Northwest China, North China, and South China. Strong seasonal variation of the PBLH exhibited high values in summer and low values in winter, which was also consistent with the turbulent vertical exchange. Not surprisingly, the highest RH in South China and the lowest RH in desert areas of Northwest China(less than 30%). Seasonally, South China exhibited little variation, whereas Northwest China exhibited its highest humidity in winter and lowest humidity in spring,the maximum values in the other regions were obtained from July to September.
基金supported by the National Natural Science Foundation of China (Nos. 21406164, 21466035 and 51203111)the National Basic Research Program of China ("973" Program, Nos. 2012CB720100 and 2014CB239300)
文摘Response surface methodology(RSM) was employed to optimize the control parameters of TiO_2/graphene with exposed {001} facets during synthesis, and its enhanced photocatalytic activities were evaluated in the photodegradation of toluene. Experimental results were in good agreement with the predicted results obtained using RSM with a correlation coefficient(R^2) of 0.9345. When 22.06 mg of graphite oxide(GO) and 2.09 mL of hydrofluoric acid(HF) were added and a hydrothermal time of 28 h was used, a maximum efficiency in the degradation of toluene was achieved. X-ray diffraction(XRD), transmission electron microscopy(TEM), and scanning electron microscopy(SEM) were employed to characterize the obtained hybrid photocatalyst. The electron transferred between Ti and C retarded the combination of electron–hole pairs and hastened the transferring of electrons, which enhanced the photocatalytic activity.
基金a grant of the Hainan Chang'an International Pharmaceutical Company Limited
文摘Objective: To compare the efficacy and safety of Lobaplatin plus Etoposide (EL) and Cisplatin plus Etoposide (EP) regimens in chemonaive with extensive-stage small-cell lung cancer (SCLC). Methods: Between July 2010 and July 2011, a total of 62 patients with extensive-stage small-cell lung cancer who received initial treatment in our hospital and 309 hospital of PLA. 31 patients were randomly assigned to the EL Group: Lobaplatin was given intravenously at a dose of 30 mg/m2 on day 1 and Etoposide 100 mg/m2 on days 1 to 3 of 21-day cycles for a maximum of six cycles. Another 31 patients were assigned to the EP Group: Cisplatin was given intravenously at a dose of 75 mg/m2 on day 1 and Etoposide 100 mg/m2 on days 1 to 3 of 21-day cycles for a maximum of six cycles. We evaluated the efficacy, overall response rate (ORR), disease control rate (DCR), the progression-free survival (PFS) and toxicity between the patients of the two groups. Results: All 62 patients were eligible. In the EL group, 2 (6.5%) patients had complete response, 20 (64.5%) patients had partial response, 5 (16.1%) patients had stable disease and 4 (12.9%) patients had progress disease. In the EP group, 2 (6.5%) patients had complete response, 22 (70.9%) patients had partial response, 4 (12.9%) patients had stable disease and 3 (9.7%) patients had progress disease. The ORR of EL and EP group were 70.9% and 77.4%, respectively, showing no significant difference (P = 0.562). The DCR of both groups were 87% and 90%, respectively, showing no significant difference (P = 0.688). Median PFS of patients with EL and EP regimens were 5.5 months and 5 months, respectively, showing no significant difference (P = 0.637). Adverse events were observed in all 62 patients. Grade 1 to 4 anemia was higher in the EP group than in EL group, showing significant difference (P = 0.02). Grade 3 and 4 thrombocytopenia was seen in 4 patients (12.9%) in EL group and 1 patient (3.2%) in EP group. Although one patient had platelet transfusion owing to Grade 4 thrombocytopenia in EL group, no significant difference (P = 0.637) were shown. The incidence of nausea/vomiting was higher in the EP group than in the EL group (96.7% vs 51.6%, P = 0.00). Conclusion: The EL regimen is an effective and low-toxicity chemotherapy and no inferior to EP regimen in treatment response, therefore, EL regimen maybe is a good choice for patients with extensive-stage SCLC.
基金the National Natural Science Foundation of China(grant number 31672295)。
文摘Generalized anxiety disorder(GAD)has harmful effects on physical and mental health and quality of life.Coloring therapy has been reported to have a positive effect on improving patient anxiety and depression.But there are no reported clinical trials examining their effectiveness as a treatment for GAD.This study was planned to evaluate the effectiveness of coloring therapy combined with conventional therapy in improving anxiety,depression,and positive and negative emotions with GAD.This randomized controlled study comprising 88 GAD patients was selected for intervention in different wards.The control group(n=45)was given conventional antianxiety medication and physical therapy,and the experimental group(n=43)received coloring therapy combined with conventional therapy.The Self-Rating Depression Scale,Self-Rating Anxiety Scale(SAS),Hamilton Depression Scale,Hamilton Anxiety Scale(HAMA),and Positive and Negative Affect Scale were assessed in both groups before and 3 weeks after the intervention.After the intervention,there were statistical differences in intra-and inter-group comparisons of anxiety,depression,and positive and negative mood scales in the experimental and control groups(p<.05).The minus in anxiety/positive emotions pre-and postintervention in the experimental group was statistically significant compared to that in anxiety/positive emotions pre-and postintervention in the control group(HAMA:d=1.45,95%confidence interval[CI](0.34,2.57),p=.011;SAS:d=3.87,95%CI(1.73,6.00),p=.001;positive:d=1.76,95%CI(0.17,3.34),p=.030).The minus in depressive/negative emotions pre-and postintervention in the experimental group was not statistically significant compared with that in depressive/negative emotions pre-and postintervention in the control group(p>.05).For GAD patients,adding coloring therapy based on conventional drug therapy and physical therapy can not only reduce depression and negative emotions but also have better effects on reducing anxiety and improving positive emotions than conventional therapy.
基金supported by Grants from the National Science and Technology Pillar Program of China(No.2015DAD09B01)
文摘Fifty-three larch interspecific hybrid clones(Larix kaempferi × L.gmelini) and their parent clones were used for growth curve analysis of height variations.The growth curves of the 55 clones were 'S'-shaped and 36 exhibited similar curves as the male parent.The coefficients of the logistic models were higher than 0.943,indicating that our results were effective in the simulation of the growth curves.ANOVA analysis showed significant differences in height of different clones (P\0.01).Average date of maximum height growth was Day 173,and average duration of rapid growth lasted for 50 days.Annual average increase in height was 9.7cm d^(-1) and daily average increase was 0.2 cm.The ratio of GR to the total annual increase in height ranged from 51.2 to 68.8%,with the average being 59.8%.There was a positive correlation between k values and plant heights which benefited from the evaluation of early plant height.There was also a positive correlation between GR(growth stage),GD(plant height) and annual increase in height.These results are informative to the evaluation of the elite clone selection and provide a theoretical basis for breeding and management.
基金supported by the National Natural Science Foundation of China (Nos.21406164,21466035,51203111)the National Basic Research Program of China("973" program,Nos.2012CB720100,2014CB239300)
文摘The crystal form of TiO_2 is a crucial focus of research on the photocatalytic degradation of gaseous pollutants by TiO_2-based composite photocatalysts. To explore the synergistic effect of mixed crystalline TiO_2 on gaseous organic-pollutant photocatalytic degradation, we synthesized a series of TiO_2 nanoparticles with controllable phase ratios. We explored the role of the TiO_2 phase ratio on the photocatalytic activity and degradation pathway in the photodegradation of 2-propanol(IPA). We estimated the crystallite size and crystal proportions of anatase and rutile by X-ray diffraction. We used the Brunauer-Emmett-Teller method to calculate the specific surface area and Fourier transform infrared spectroscopy to characterize the surface chemistry of the samples. Our results show the photocatalytic activities of pure anatase and the sample with 8.6% rutile to be much better than those of the samples with a phase junction and pure rutile. As such, anatase is the better option for the study of photodegradation design and preparation of gas-phase organic pollutants.
基金financial support from the Major Science and Technology Projects of Sichuan Province(2019KJT0078)the National Natural Science Foundation of China(51904193)the Fundamental Research Funds for the Central Universities。
文摘Li_(4)Ti_(5)O_(12)(LTO) anode material demonstrates superior cycling performance due to its stable spinel structure and high lithiation/de-lithiation potential.Herein,a novel energy-saving solid-phase synthesis route for LTO has been successfully designed,employing the cheap industrial intermediate product of metatitanic acid (HTO) as titanium source.Through the in-situ Fourier transform infrared spectroscopy (FTIR)and ex-situ X-ray diffraction (XRD),it is revealed for the first time that the amorphous crystal structure of HTO is more conducive for the Li+insertion,making it possible to prepare LTO at a relatively lower sintering temperature.Utilizing the dehydration carbonization reaction between glucose and sulfuric acid,an ingenious strategy of glucose pre-coating is adopted to avoid the generation of Li_(2)SO_(4) impurity caused by the residual sulfuric acid on the surface of HTO,which meanwhile enhances the conductivity and inhibits the particle growth of LTO.The obtained ALTO@C anode material consequently exhibits excellent electrochemical performance that 132.0 m Ah g^(-1)is remained even at 20 C,and ultra low decay rate of 0.015% per cycle is achieved during 1000 cycles at 2 C.Remarkably,LiCoO_(2)//ALTO@C full cell delivers conspicuous low-temperature property (130.7 m Ah g^(-1)at 0.5 C and almost no attenuation after 300 cycles under-20℃).
基金Supported by Open Fund of State Key Laboratory of Remote Sensing Science of China(Grant No.OFSLRSS 201913)Guangdong Provincial Basic and Applied Basic Research Foundation of China(Grant No.2019B151520017).
文摘Oral inhalation of aerosolized drugs has be widely applied in healing the affected body organs including lesions of the throat and lungs and it is more effiicient than those conventional therapies,such as intravenous drip,intramuscular injection and external topical administration in the aspects of the dosage reduction and side effects of drugs.Never-theless,the traditional atomization devices always exhibit many drawbacks.For example,non-uniformed atomization particle distribution,the instability of transient atomization quantity and difficulties in precise energy control would seriously restrict an extensive use of atomization inhalation therapy.In this study,the principle of intra-hole fluctua-tion phenomenon occurred in the hole is fully explained,and the produced volume change is also estimated.Addi-tionally,the mathematical expression of the atomization rate of the atomizing device is well established.The mecha-nism of the micro-pump is further clarified,and the influence of the vibration characteristics of the atomizing film on the atomization behavior is analyzed theoretically.The curves of sweep frequency against the velocity and amplitude of the piezoelectric vibrator are obtained by the Doppler laser vibrometer,and the corresponding mode shapes of the resonance point are achieved.The influence of vibration characteristics on atomization rate,atomization height and atomization particle size are also verified by experiments,respectively.Both the experimental results and theoretical calculation are expected to provide a guidance for the design of this kind of atomization device in the future.
